Cutover / Completion of Project Sample Clauses

Cutover / Completion of Project. 6.6.1. SCE will own, operate, and maintain all of the “To-the-Meter” electric distribution and service systems within the MHP. Upon completion of the conversion, the facilities will be managed under and subject to Rule 15, Rule 16, and other utility tariffs. 6.6.2. Existing MHP residents within the MHP will be converted to direct SCE service and will be served under existing SCE’s tariffs. At the time of the initial service cut-over, fees associated with new customer credit checks and service deposits will be waived. However, as with other residential customers, MHP residents will still be subject to discontinuance of service provisions per the Utilities’ Discontinuance and Restoration of Service Rule (Rule 11). After the service cutover is completed and MHP residents have established their SCE accounts, all new MHP residents will be subject to all existing credit requirements and deposits applicable to all SCE residential customers. 6.6.3. Existing MHP residents who participate in the CARE and/or the Family Electric Rate Assistance (FERA) programs through the MHP master-metered/submetered distribution system and become a customer of SCE through the MHP Program will be deemed grandfathered into the respective program without having to re-certify or reapply as long as the name of the customer for the new service account matches the name of the CARE/FERA participant. This will be a one-time exception to the respective CARE/FERA Rules at the time of the service conversion. 6.6.4. Existing MHP residents who receive medical baseline allowances through the MHP master-metered/submetered distribution system and become a customer of SCE through the MHP Program will be deemed grandfathered and will continue to receive the same medical baseline allowances without having to re-certify or reapply as long as the participant who is receiving the medical baseline allowance still lives at the residence. This will be a one-time exception to the Medical Baseline Rules at the time of the service conversion. 6.6.5.
Sample 1See All (6)
AutoNDA by SimpleDocs
Cutover / Completion of Project. 5.11.1. Prior to cutover, all jurisdictional authorities must inspect and approve installation of the “Beyond-the-Meter” work. 5.11.2. Cutover cannot occur until [Utility] is satisfied that 24-hour access is available to all utility facilities. Where such access may be restricted due to fencing or locked gating, the MHP Owner/Operator or the owners of the individual MHP-Spaces shall provide a utility-approved locking device with a utility keyway. Where electronic gates may be involved, the gate must be fitted with a key switch, with utility keyed keyway, that activates the controller. 5.11.3. The MHP Owner/Operator is responsible for ensuring that all qualifying MHP- Spaces participate in the program and for discontinuing MHP utility service to all qualifying MHP- Spaces no later than 90 days after [Utility] is ready to cutover all qualifying MHP-Spaces to direct Utility service. 5.11.4. If requested by [Utility], the Contractor shall be available to meet and perform joint cutover with [Utility] for the individual services within the MHP. [Utility] will coordinate with the Contractor to jointly meet to perform this work. 5.11.5. Upon cutover to the new distribution system, the MHP Owner/Operator will take ownership of all “Beyond-the-Meter” facilities and will be responsible for all maintenance associated with the facilities.
Sample 1See All (4)
Cutover / Completion of Project. 6.6.1. PG&E will own, operate, and maintain all “To-the-Meter” electric and/or gas distribution and service systems within the MHP. Upon completion of the conversion, the facilities will be managed under and subject to Rule 15 and Rule 16 and other applicable tariffs. 6.6.2. If necessary, PG&E will coordinate with the Contractor to jointly meet to perform joint cutover with PG&E for the individual services within the MHP. 6.6.3. PG&E will reimburse the MHP Owner/Operator for all qualifying “Beyond-the- Meter” work as summarized in Attachment C. 6.6.4. PG&E or its Contractor shall purge the gas Legacy System of unpressurized gas to ensure safety of the disconnected system.
Sample 1Sample 2
Cutover / Completion of Project. 6.6.1. Pacific Power will own, operate, and maintain all “To-the-Meter” electric distribution and service systems within the MHP. Upon completion of the conversion, the facilities will be managed under and subject to applicable tariffs. 6.6.2. If necessary, Pacific Power will coordinate with the MHP Owner/Operator’s contractor to jointly meet to perform joint cutover with Pacific Power for the individual services within the MHP. 6.6.3. Pacific Power will discontinue the master-meter submeter discount after cutover to direct utility service. 6.6.4. Pacific Power will reimburse the MHP Owner/Operator for all qualifying “Beyond-the-Meter” work as summarized in Attachment C.
Sample 1
Cutover / Completion of Project. 6.6.1. Liberty Utilities will own, operate, and maintain all “To-the-Meter” electric distribution and service systems within the MHP. Upon completion of the conversion, the facilities will be managed under and subject to Rule 15 and Rule 16 and other applicable tariffs. 6.6.2. If necessary, Liberty Utilities will coordinate with the Contractor to jointly meet to perform joint cutover with Liberty Utilities for the individual services within the MHP. 6.6.3. Liberty Utilities will reimburse the MHP Owner/Operator for all qualifying “Beyond-the-Meter” work as summarized in Attachment C.
Sample 1
Cutover / Completion of Project. 5.11.1. Prior to cutover, all jurisdictional authorities must inspect and approv installation of the “Beyond-the-Meter” work. 5.11.2. Cutover cannot occur until SDG&E is satisfied that 24 hour access is available to all utility facilities. Where such access may be restricted due to fencing or locked gating, the MHP Owner/Operator or the owner of the individual MH- Spaces shall provide a utility approved locking device with a utility keyway. Where electronic gates may be involved, the gate will be fitted with a key switch, with utility keyed keyway, which may activate the controller. 5.11.3. The MHP Owner/Operator is responsible for ensuring that all qualifying MH- spaces participate in the program and for discontinuing MHP utility service to all qualifying MH-spaces no later than 90 days after SDG&E is ready to cutover all qualifying MH-spaces to direct Utility service. 5.11.4. If requested by SDG&E, the Contractor shall be available to meet and perform joint cutover with SDG&E for the individual services within the MHP. SDG&E will coordinate with the Contractor to jointly meet to perform this work. 5.11.5. Upon cutover to the new distribution system, the MHP Owner/Operator will take ownership of all “Beyond-the-Meter” facilities and will be responsible for all maintenance associated with the facilities. 5.11.6. The MHP Owner/Operator shall have its Contractor purge the gas legacy master-meter system of unpressurized gas to ensure safety of the disconnected gas system.
Sample 1
Cutover / Completion of Project. 6.6.1. SDG&E will own, operate, and maintain all of the “To-the-Meter” electric and/or gas distribution and service systems within the MHP. Upon completion of the conversion, the facilities will be managed under and subject to Rule 15 and Rule 16 and other utility tariffs. 6.6.2. If necessary, SDG&E will coordinate with the Contractor to jointly meet to perform joint cutover with SDG&E for the individual services within the MHP.
Sample 1
AutoNDA by SimpleDocs

Related to Cutover / Completion of Project

  • Completion of Project This Grant Agreement shall terminate upon completion of the project and payment of the last invoice.

  • COMMENCEMENT AND COMPLETION OF THE PROJECT Section 3.01 The Project (a) The Company intends and expects, together with any Sponsor Affiliate, to (i) construct and acquire the Project, and (ii) meet the Contract Minimum Investment Requirement within the Investment Period. The Company anticipates that the first Phase of the Project will be placed in service during the calendar year ending December 31, 2020. (b) Pursuant to the FILOT Act and subject to Section 4.03 hereof, the Company and the County hereby agree that the Company and any Sponsor Affiliates shall identify annually those assets which are eligible for FILOT payments under the FILOT Act and which the Company or any Sponsor Affiliate selects for such treatment by listing such assets in its annual PT-300S form (or comparable form) to be filed with the Department (as such may be amended from time to time) and that by listing such assets, such assets shall automatically become Economic Development Property and therefore be exempt from all ad valorem taxation during the Exemption Period. Anything contained in this Fee Agreement to the contrary notwithstanding, the Company and any Sponsor Affiliates shall not be obligated to complete the acquisition of the Project. However, if the Company, together with any Sponsor Affiliates, does not meet the Contract Minimum Investment Requirement within the Investment Period, the provisions of Section 4.03 hereof shall control. (c) The Company may add to the Land such real property, located in the same taxing District in the County as the original Land, as the Company, in its discretion, deems useful or desirable. In such event, the Company, at its expense, shall deliver an appropriately revised Exhibit A to this Fee Agreement, in form reasonably acceptable to the County.

  • Completion of the Project The Participating County acknowledges it is obligated to undertake and complete the design and construction of the Project in compliance with all of the applicable terms and conditions of the Project Documents and the Participating County agrees to use its best efforts to cause the completion of design and construction of the Project in compliance with the applicable terms and conditions of such documents. The Participating County agrees to complete the Project in accordance with this Agreement and consistent with the scope, cost and schedule established by the Board and attached hereto in Exhibit A, as such scope, cost and schedule may be modified with the approval of Finance and the recognition of the Board.

  • Completion of Repairs Borrower will commence any Repairs as soon as practicable after the date of this Loan Agreement and will diligently proceed with and complete such Repairs on or before the Completion Date. All Repairs and Capital Replacements will be completed in a good and workmanlike manner, with suitable materials, and in accordance with good building practices and all applicable laws, ordinances, rules, regulations, building setback lines and restrictions applicable to the Mortgaged Property. Borrower agrees to cause the replacement of any material or work that is defective, unworkmanlike or that does not comply with the requirements of this Loan Agreement, as determined by Lender.

  • Project Completion The Contractor agrees to schedule a final job walk with the County. If required, the County will prepare a list of incomplete items, the “Punch List”. The Contractor agrees to complete the “Punch List” corrections and schedule a final project completion job walk. The County will sign the “Punch List” as completed when determined, the project is finished. The Contractor agrees to submit the following along with its final payment request:

  • Project Completion Report At the completion of construction and once a Project is placed in service, the Subrecipient must submit a Project Completion Report that includes the total number of units built and leased, affordable units built and leased, DR-MHP units built and leased, an accomplishment narrative, and the tenants names, demographics and income for each DR-MHP unit.

  • Construction of Project 11.1.1 Developer agrees to cause the Project to be developed, constructed, and installed in accordance with the terms hereof and the Construction Provisions set forth in Exhibit D, including those things reasonably inferred from the Contract Documents as being within the scope of the Project and necessary to produce the stated result even though no mention is made in the Contract Documents.

  • COMPLETION OF AGREEMENT This document comprises the entire agreement between the District and the Association in the matters lawfully within the scope of negotiation. Neither party shall have any obligation to meet and negotiate during the term of this agreement.

  • Commencement and Completion of Work The professional services to be performed pursuant to this Agreement shall commence within five (5) days from the Effective Date of this Agreement. Failure to commence work in a timely manner and/or diligently pursue work to completion may be grounds for termination of this Agreement.

  • Upon completion of the Project the Recipient shall make a full and complete accounting to the OPWC of the Eligible Project Cost.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!