Design Development Phase (Preliminary Plans Sample Clauses

Design Development Phase (Preliminary Plans a. Upon approval by the DISTRICT of the Schematic Design services set forth above, the ARCHITECT shall prepare Design Development Documents based on the Schematic Design and based on the Program that has been approved by the DISTRICT. Such documents shall consist of site and floor plans, elevations, cross-sections, and other documents necessary to depict the design of the PROJECT, and shall outline specifications to fix and illustrate the size, character, and quality of the entire PROJECT as to the Program requirements, landscapes, architecture, civil, structural, mechanical, and electrical systems, materials, and such other essentials as may be appropriate. The ARCHITECT shall prepare the Design Development Documents to comply with the requirements of all governmental agencies having jurisdiction over the PROJECT including, but not limited to, the OPSC, the CDE, DSA, the County Health Department and the local fire marshal/department. b. The ARCHITECT shall prepare and submit to the DISTRICT a written estimate of the Construction Cost in conformance with Articles V and VI and shall advise the DISTRICT, in writing, of any adjustments to the estimate of Construction Cost. c. The ARCHITECT shall perform all Design Development Services to keep the PROJECT within all Budget and scope constraints set by the DISTRICT, unless otherwise modified by written authorization by the DISTRICT.
Sample 1Sample 2Sample 3See All (18)
AutoNDA by SimpleDocs
Design Development Phase (Preliminary Plans a. Upon approval by the DISTRICT of the services set forth in Article II, paragraph 23, the ARCHITECT shall prepare Design Development Documents for approval by the DISTRICT. Such documents shall consist of site and floor plans, elevations, cross sections, and other documents necessary to depict the Design of PROJECT, and shall outline specifications to fix and illustrate the size, character and quality of the entire PROJECT as to the program requirements, landscapes, architecture, civil, structural, mechanical, and electrical systems, materials, and such other essentials as may be appropriate. The ARCHITECT shall prepare the Design Development Documents to comply with the requirements of all governmental agencies having jurisdiction over the PROJECT, including, but not limited to Division of the State Architect (DSA) and the local Fire Department. b. The ARCHITECT shall establish an estimated PROJECT Construction Cost. c. The ARCHITECT shall perform Design Development Services to keep the PROJECT within all Budget and scope constraints set by the DISTRICT, unless otherwise modified by written authorization by the DISTRICT.
Sample 1Sample 2Sample 3See All (7)
Design Development Phase (Preliminary Plans a. Upon the ARCHITECT receiving written approval from the DISTRICT of the services set forth in Article II, paragraph 23, the ARCHITECT shall prepare Design Development Documents for approval by the DISTRICT. Such documents shall consist of site and floor plans, elevations, cross sections, and other documents necessary to depict the Design of PROJECT, and shall outline specifications to fix and illustrate the size, character and quality of the entire PROJECT as to the program requirements, landscapes, architecture, civil, structural, mechanical, and electrical systems, materials, and such other essentials as may be appropriate. The ARCHITECT shall prepare the Design Development Documents to comply with the requirements of all governmental agencies having jurisdiction over the PROJECT, including but not limited to, the Office of Public School Construction (OPSC), California Department of Education (CDE), Division of the State Architect (DSA) and the local Fire Department. b. The ARCHITECT shall establish an estimated PROJECT Construction Cost. c. The ARCHITECT shall perform Design Development Services to keep the PROJECT within all Budget and scope constraints set by the DISTRICT, unless otherwise modified by written authorization by the DISTRICT. d. The ARCHITECT shall not proceed to do any work or perform any services for the Construction Document Phase without first obtaining written approval from the DISTRICT of the Design Development Documents and Information.
Sample 1Sample 2
Design Development Phase (Preliminary Plans. Upon approval by the Owner of the Schematic Design services set forth above, the Design-Builder shall prepare Design Development Documents based on the Schematic Design and based on the Program that has been approved by the Owner. Such documents shall consist of site and floor plans, elevations, cross-sections, and other documents necessary to depict the design of the Project, and shall outline specifications to fix and illustrate the size, character, and quality of the entire Project as to the Program requirements, landscapes, architecture, civil, structural, mechanical, and electrical systems, materials, and such other essentials as may be appropriate. The Design-Builder shall prepare the Design Development Documents to comply with the requirements of all governmental agencies having jurisdiction over the Project including, but not limited to, the OPSC, the CDE, DSA, the County Health Department and the local fire marshal/department. The Design-Builder shall establish and prepare an estimated Project Construction Cost and shall advise the Owner, in writing, of any adjustments to the estimate of Construction Cost. The Design-Builder shall perform Design Development Services to keep the Project within all budget and scope constraints set by the Owner, unless otherwise modified by written authorization by the Owner.
Sample 1
Design Development Phase (Preliminary Plans a. Upon approval by the DISTRICT of the services set forth in Article II, paragraph 23, the ARCHITECT shall prepare Design Development Documents for approval by the DISTRICT. Such documents shall consist of site and floor plans, elevations, cross sections, and other documents necessary to depict the Design of PROJECT, and shall outline specifications to fix and illustrate the size, character and quality of the entire PROJECT as to the program requirements, landscapes, architecture, civil, structural, mechanical, and electrical systems, materials, and such other essentials as may be appropriate. b. The ARCHITECT shall establish an estimated PROJECT Construction Cost. c. The ARCHITECT shall perform Design Development Services to keep the PROJECT within all budget and scope constraints set by the DISTRICT, unless otherwise modified by written authorization by the DISTRICT.
Sample 1
Design Development Phase (Preliminary Plans. Upon written approval by District of the schematic design drawings for each Project and following written notice from District, Architect shall complete the following Services for the design development phase of each Project:
Sample 1

Related to Design Development Phase (Preliminary Plans

  • Design Development Phase INDICATE IN STATEMENT OF WORK “NOT APPLICABLE” IF SECTION IS NOT APPLICABLE 1.1.6.1. The ARCHITECT/ENGINEER shall prepare from the approved Schematic Design Studies, the Design Development Documents consisting of drawings (including at least architectural, landscaping, civil, structural, mechanical and electrical plans, building sections; and finish schedule), outline specifications following the Construction Specification Institute "CSI" Format and other necessary documents to fix and describe the size and character of the entire Project as to its site, structural, mechanical, and electrical systems, materials and other such essentials as may be appropriate, for and until approved by the State. 1.1.6.2. The ARCHITECT/ENGINEER shall conduct meetings with the State, Efficiency Vermont, and relevant members of the design team, to review the Design Development Documents for the purposes of furthering the energy efficiency objectives of the Project. 1.1.6.3. The ARCHITECT/ENGINEER shall prepare for the State a revised accounting of how the Project is responding to LEED criteria. 1.1.6.4. The ARCHITECT/ENGINEER shall submit to the State a revised Statement of Probable Construction Cost based thereon for and until approved by the State.

  • Development Phase contractual phase initiated with the approval of ANP for the Development Plan and which is extended during the Production Phase while investments in xxxxx, equipment, and facilities for the Production of Oil and Gas according to the Best Practices of the Oil Industry are required.

  • Design Development An interim step in the design process. Design Development documents consist of plans, elevations, and other drawings and outline specifications. These documents will fix and illustrate the size and character of the entire project in its essentials as to kinds of materials, type of structure, grade elevations, sidewalks, utilities, roads, parking areas, mechanical and electrical systems, and such other work as may be required.

  • Design Development Documents See Section 2, Part 1, Article 2.1.5.

  • Project Plan Development of Project Plan Upon the Authorized User’s request, the Contractor must develop a Project Plan. This Project Plan may include Implementation personnel, installation timeframes, escalation procedures and an acceptance plan as appropriate for the Services requested. Specific requirements of the plan will be defined in the RFQ. In response to the RFQ, the Contractor must agree to furnish all labor and supervision necessary to successfully perform Services procured from this Lot. Project Plan Document The Contractor will provide to the Authorized User, a Project Plan that may contain the following items: • Name of the Project Manager, Contact Phone Numbers and E-Mail Address; • Names of the Project Team Members, Contact Phone Numbers and E-Mail Address; • A list of Implementation milestones based on the Authorized User’s desired installation date; • A list of responsibilities of the Authorized User during system Implementation; • A list of designated Contractor Authorized Personnel; • Escalation procedures including management personnel contact numbers; • Full and complete documentation of all Implementation work; • Samples of knowledge transfer documentation; and • When applicable, a list of all materials and supplies required to complete the Implementation described in the RFQ. Materials and Supplies Required to Complete Implementation In the event that there are items required to complete an Implementation, the Contractor may request the items be added to its Contract if the items meet the scope of the Contract. Negotiation of Final Project Plan If the Authorized User chooses to require a full Project Plan, the State further reserves the right for Authorized Users to negotiate the final Project Plan with the apparent RFQ awardee. Such negotiation must not substantively change the scope of the RFQ plan, but can alter timeframes or other incidental factors of the final Project Plan. The Authorized User will provide the Contractor a minimum of five (5) business days’ notice of the final negotiation date. The Authorized User reserves the right to move to the next responsible and responsive bidder if Contractor negotiations are unsuccessful.

  • Project Work Plan The Statement of Work is the formal document incorporated into the Grant. The Project Work Plan documents how the Grantee will achieve the performance measures outlined in the Grant. Changes to the Statement of Work require an amendment. Project Work Plans may be changed with written approval from PEI and the Grantee.

  • Development Plan document specifying the work program, schedule, and relevant investments required for the Development and the Production of a Discovery or set of Discoveries of Oil and Gas in the Concession Area, including its abandonment.

  • Development Plans Shipper has provided Gatherer with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, and production activities to take place with respect to Dedicated Production for the applicable Development Period. The information contained in the TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). Current Development Plan is broken out on a Subsystem-by-Subsystem basis and, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties. (a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, and production activities that Shipper expects to take place with respect to Dedicated Production for the then-applicable Development Period. Shipper and Gatherer shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Shipper shall provide (or cause to be provided) to Gatherer a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, and production activities to take place with respect to Dedicated Production for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). Notwithstanding anything herein to the contrary, in no event shall Gatherer be required to agree to any Updated Development Plan and corresponding updated Gathering System Plan that contains a Committed Build-Out that (i) has a corresponding Target Completion Date that occurs after the end of the Initial Term, and (ii) Gatherer, in its sole discretion, does not wish to approve. (b) Each proposed Development Plan shall include information as to the following, in each case, broken out on a Subsystem-by-Subsystem basis and, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis: (i) all Xxxxx that, as of the date such Development Plan was delivered, are currently in existence and (A) the production therefrom is being delivered into the Gathering System, or (B) are awaiting connection to the Gathering System; (ii) the Xxxxx that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well”), and the estimated timing of the drilling of such Planned Xxxxx; (iii) forward-looking production estimates for the applicable time period covered by such Development Plan for all Shipper Gas (A) that Shipper reasonably and in good faith believes will become owned or Controlled by Shipper during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all Xxxxx then-existing and (II) in the aggregate, any Planned Xxxxx included in such Development Plan (such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). (iv) forward-looking estimates for the applicable time period covered by such Development Plan of the aggregate volumes of those Shipper Injected Liquids that Shipper intends to Tender to the Injection Points hereunder to receive the System Services (such estimates, both with respect to a particular Quarter and an entire Year, the “System Liquids Estimates” and, together with the Dedicated Production Estimates, the “System Production Estimates”); (v) (A) each new receipt point (including the location thereof) proposed by Shipper with respect to the System Production Estimate reflected in such Development Plan (each such receipt point, including those located at the site of a Planned Well, a “Planned Receipt Point”), (B) each Receipt Point at which Shipper expects to Tender Shipper Gas and/or Shipper Injected Liquids reflected in such Development Plan into the Gathering System, and (C) the estimated portion of the System Production Estimate contained in such Development Plan that Shipper expects to Tender at each such Receipt Point and Planned Receipt Point; (vi) the earliest date on which each Planned Well included in the Development Plan is estimated to be completed and producing, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Well was delivered to Gatherer hereunder; (vii) the anticipated characteristics of the production from the Xxxxx and Planned Xxxxx reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Shipper may utilize the existing and historical production information from similarly situated Xxxxx; (viii) (A) each new delivery point (including the location thereof) proposed by Shipper with respect to the System Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Shipper expects Shipper Gas produced from the Xxxxx and Planned Xxxxx reflected in such Development Plan to be redelivered to Shipper, (C) each Delivery Point at which Shipper expects any Drip Liquids allocated to Shipper in accordance with this Agreement and/or Shipper Injected Liquids to be redelivered to Shipper, and (D) the estimated portion of the System Production Estimate contained in such Development Plan that Shipper expects to be redelivered to Shipper at each such Delivery Point and Planned Delivery Point; (ix) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Shipper proposes to be a Dedicated Contract; and (x) other information reasonably requested by Gatherer that is relevant to the design, construction, and operation of the Gathering System, including (A) any Subsystem Extension proposed by Shipper, (B) the relevant Receipt Point, Planned Receipt Point, Delivery Point and Planned Delivery Point facilities applicable to such TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). Development Plan, and (C) any treating, processing, or liquids handling facilities proposed by Shipper that may be required for any Shipper Gas and/or Shipper Injected Liquids to meet applicable Downstream Facility specifications at the Delivery Points.

  • Development Work The Support Standards do not include development work either (i) on software not licensed from CentralSquare or (ii) development work for enhancements or features that are outside the documented functionality of the Solutions, except such work as may be specifically purchased and outlined in Exhibit 1. CentralSquare retains all Intellectual Property Rights in development work performed and Customer may request consulting and development work from CentralSquare as a separate billable service.

  • Annual Work Plans and Budgets The Recipient shall furnish to the Association as soon as available, but in any case not later than September 1 of each year, the annual work plan and budget for the Project for each subsequent year of Project implementation, of such scope and detail as the Association shall have reasonably requested, except for the annual work plan and budget for the Project for the first year of Project implementation, which shall be furnished no later than one (1) month after the Effective Date.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!