Export of Used Aircraft Sample Clauses

Export of Used Aircraft. 1) A used aircraft under the jurisdiction of the UK or Singapore is eligible for export to the other only where the used aircraft, regardless of State of Design (SoD), has a design approval granted by the Importing Participant. 2) The Exporting Participant will certify that a used aircraft eligible under (1) above being exported to the UK or Singapore: a) conforms to the type design approved by the Importing Participant, as specified in the Importing Participant’s type certificate data sheet and any additional STCs approved by the Importing Participant; b) is in a condition for safe operation; and c) is properly maintained using approved procedures and methods (evidenced by logbooks and maintenance records); and d) complies with the applicable airworthiness directives and additional import requirements of the Importing Participant, where notified. 3) The Exporting Participant will also provide information on the acoustical configuration of the used aircraft and its noise and emission characteristics necessary for the Importing Participant to establish compliance with its environmental requirements and to complete the certificate of noise compliance or equivalent record. 4) The Exporting Participant will provide a statement or declaration on the Export Airworthiness Certificate or Export Certificate of Airworthiness of its certification in respect of sub-paragraph (3) above, including the identification of any or all exceptions from the identified approved type design of the Importing Participant. The exception from the identified type design will be coordinated in accordance with 8.5 below. 5) In the case of (2)(c) above, the Importing Participant may request inspection and maintenance records, which include but are not limited to: a) the original or certified true copy of the Export Airworthiness Certificate or Export Certificate of Airworthiness, issued by the Exporting Participant; b) records, which verify that all overhauls, major design changes, and major repair designs were accomplished in accordance with data approved in accordance with Section 2 of this Technical Arrangement; c) maintenance records and logbook entries which substantiate that the used aircraft is properly maintained by fulfilling the requirements of an approved maintenance program by an authorised person or Organisation; and d) where major design changes or STCs are embodied in a used aircraft, all necessary data for subsequent maintenance are expected to be provided, such as the da...
AutoNDA by SimpleDocs
Export of Used Aircraft. 5.2.3.1. Refer to Article 27 of Annex 1, 5.2.3.2. The competent authority of the importing Party may request inspection and maintenance records, which include: a) records which verify that all overhauls, major changes, and major repairs were accomplished in line with data approved in line with section 2; b) maintenance records and logbook entries which substantiate that the used aircraft is properly maintained to the requirements of a maintenance programme approved by the competent authority for EU and approved or accepted by JCAB for Japan, and that all known defects have been rectified; and c) where major design changes or STCs are embodied in a used aircraft, the necessary data for subsequent maintenance, such as the data describing the installation, the materials and parts used, wiring diagrams for installation on avionic and electrical systems, drawings or floor plans for installations in the cabin, fuel or hydraulic systems, structural changes.

Related to Export of Used Aircraft

  • Export/Import 14.1 The Works (including, without limitation, any Software) may be subject to the export or import laws and regulations of: 14.1.1 the United States, including without limitation the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Parts 120-130), the U.S. Export Administration Regulations (15 C.F.R. Parts 730-774), and the economic and trade sanctions administered by the U.S. Department of Treasury Office of Foreign Assets Control; 14.1.2 the European Union and its member states, including without limitation Council Regulation (EC) No. 1334/2000; and 14.1.3 other countries (collectively, “Export/Import Law”). Buyer agrees to comply strictly with all Export/Import Laws applicable to the Works. Buyer shall promptly notify Supplier of any authorisation requirements under Export/Import Laws that may apply to delivery of the Works to Buyer site(s). Buyer acknowledges and agrees that the Works shall not be exported, re-exported, trans-shipped or otherwise transferred to Cuba, Iran, North Korea, Syria, Sudan, or any other countries for which the United States and/or the European Union maintains an embargo (collectively, "Embargoed Countries"), or a national or resident thereof, or to any person or entity on the U.S. Department of Treasury List of Specially Designated Nationals, the U.S. Department of Commerce Denied Parties or Entity List, or to any person on any comparable list maintained by the European Union or its member states (collectively, "Denied or Restricted Parties"). The lists of Embargoed Countries and Denied or Restricted Parties are subject to change without notice. Buyer represents and warrants that neither it nor any of their customers or their users is located in, a national or resident of, or under the control of an Embargoed Country or similarly Denied or Restricted Party. Buyer specifically shall obtain all required authorizations from the U.S. (or EU as applicable) Government before transferring or otherwise disclosing technical data or technology (as those terms are defined in 22 C.F.R. § 120.10 and 15 C.F.R. § 722, respectively), to any Foreign Person (as defined in 22 C.F.R. § 120.16). 14.2 Registration In accordance with 22 C.F.R. Part 122, any person who engages in the United States in the business of either manufacturing or exporting defense articles or furnishing defense services is required to register with the U.S. State Department’s Directorate of Defense Trade controls. Engaging in the business of manufacturing or exporting defense articles or furnishing defense services requires only one occasion of manufacturing or exporting a defense article or furnishing defense services. Manufacturers who do not engage in exporting must nevertheless register. 14.3 Acceptance of these terms and conditions certifies to the Supplier that the Buyer is in compliance with 22 C.F.R. Part 120 as required and the Buyer’s registration will remain valid during the terms of this agreement. 14.4 Further to acceptance, the Buyer further certifies it: 14.4.1 Understands its obligation to protect EAR or ITAR controlled Goods and Services as data as necessary from unauthorized disclosure or access to foreign person employees or visitors. 14.4.2 In the performance of the contract, the Buyer understands its obligation to determine whether it will require the use of third party subcontractors to access any technical data, Goods and Services. If required, the Buyer is responsible for identifying and licensing any activity that requires export authorization from the Department of Commerce, Bureau of Industry and Security or the Department of State, Directorate of Defense Trade Controls. 14.5 The Goods shall not be resold or exported to countries specified in the Country Guidance Chart which can be found at xxxx://xxx.xxxxxx.xxx/about-cobham/aerospace-and-security/about- us/useful-information.aspx without prior written approval of Supplier.

  • Import/Export a) Purchase orders issued pursuant to this contract shall specify the applicable International Commercial Terms of Sale (Incoterms) and the United States importer of record for all items procured under this contract. b) In performing the obligations of this contract, both Parties will comply with all applicable export, import and sanctions laws, regulations, orders, and authorizations, as they may be amended from time to time, applicable to the export (including re-export) or import of goods, software, technology, or technical data (Items) or services, including without limitation the Export Administration Regulations (EAR), International Traffic in Arms Regulations (ITAR), and regulations and orders administered by the Treasury Department’s Office of Foreign Assets Control (collectively, Export/Import Laws). c) The Party conducting the export or import shall obtain all export or import authorizations which are required under the Export/Import Laws for said Party to execute its obligations under this contract. Each Party shall reasonably cooperate and exercise reasonable efforts at its own expense to support the other Party in obtaining any necessary licenses or authorizations required to perform its obligations under this contract. Reasonable cooperation shall include providing reasonably necessary documentation, including import, end-user and retransfer certificates. d) The Party providing Items or services under this contract shall, upon request, notify the other Party of the Items or services’ export classification (e.g., the Export Control Classification Numbers or United States Munitions List [USML] category and subcategory) as well as the export classification of any components or parts thereof if they are different from the export classification of the Item at issue. The Parties acknowledge that this representation means that an official capable of binding the Party providing such Items or services knows or has otherwise determined the proper export classification. Each Party agrees to reasonably cooperate with the other in providing, upon request of the other Party, documentation or other information that supports or confirms this representation

  • Other Methods of Procurement of Goods and Works The following table specifies the methods of procurement, other than International Competitive Bidding, which may be used for goods and works. The Procurement Plan shall specify the circumstances under which such methods may be used: (a) National Competitive Bidding (b) Shopping (c) Direct Contracting

  • Application to Master Agreement For the avoidance of doubt, Clause 21.5 does not apply in respect of sums due from the Borrower to the Swap Bank under or in connection with the Master Agreement as to which sums the provisions of section 8 (Contractual Currency) of the Master Agreement shall apply.

  • Export 12.1 Export laws and regulations of the United States and any other relevant local export laws and regulations apply to the Services. Such export laws govern use of the Services (including technical data) and any Services deliverables provided under this Agreement, and You and we each agree to comply with all such export laws and regulations (including “deemed export” and “deemed re-export” regulations). You agree that no data, information, software programs and/or materials resulting from the Services (or direct product thereof) will be exported, directly or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation, or development of missile technology. 12.2 You acknowledge that the Services are designed with capabilities for You and Your Users to access the Services without regard to geographic location and to transfer or otherwise move Your Content between the Services and other locations such as User workstations. You are solely responsible for the authorization and management of User accounts across geographic locations, as well as export control and geographic transfer of Your Content.

  • Export and Import Laws The Company and, to the Company’s knowledge, each of its Affiliates, and any director, officer, agent or employee of, or other person associated with or acting on behalf of the Company, has acted at all times in compliance with applicable Export and Import Laws (as defined below) and there are no claims, complaints, charges, investigations or Proceedings pending or expected or, to the knowledge of the Company, threatened between the Company or any of its subsidiaries and any governmental authority under any Export or Import Laws. The term “Export and Import Laws” means the Arms Export Control Act, the International Traffic in Arms Regulations, the Export Administration Act of 1979, as amended, the Export Administration Regulations, and all other laws and regulations of the United States government regulating the provision of services to non-U.S. parties or the export and import of articles or information from and to the United States of America, and all similar laws and regulations of any foreign government regulating the provision of services to parties not of the foreign country or the export and import of articles and information from and to the foreign country to parties not of the foreign country.

  • Procurement of Goods and Services (a) If the HSP is subject to the procurement provisions of the BPSAA, the HSP will abide by all directives and guidelines issued by the Management Board of Cabinet that are applicable to the HSP pursuant to the BPSAA. (b) If the HSP is not subject to the procurement provisions of the BPSAA, the HSP will have a procurement policy in place that requires the acquisition of supplies, equipment or services valued at over $25,000 through a competitive process that ensures the best value for funds expended. If the HSP acquires supplies, equipment or services with the Funding it will do so through a process that is consistent with this policy.

  • FEDERAL ACQUISITION REGULATION CONTRACT CLAUSES 52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996) 52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996) - ALTERNATE I (JUL 1985) 52.246-02 INSPECTION OF SUPPLIES -- FIXED-PRICE (AUG 1996) - ALTERNATE II (JUL 1985) 52.246-03 INSPECTION OF SUPPLIES -- COST-REIMBURSEMENT (MAY 2001) 52.246-04 INSPECTION OF SERVICES -- FIXED-PRICE (AUG 1996) 52.246-05 INSPECTION OF SERVICES -- COST-REIMBURSEMENT (APR 1984) 52.246-06 INSPECTION -- TIME-AND-MATERIAL AND LABOR-HOUR (MAY 2001) 52.246-06 INSPECTION -- TIME-AND-MATERIAL AND LABOR-HOUR (MAY 2001) - ALTERNATE I (APR 1984) 52.246-15 CERTIFICATE OF CONFORMANCE (APR 1984) 52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

  • Particular Methods of Procurement of Goods and Works International Competitive Bidding. Goods and works shall be procured under contracts awarded on the basis of International Competitive Bidding.

  • Export Control This Agreement is made subject to any restrictions concerning the export of products or technical information from the United States or other countries that may be imposed on the Parties from time to time. Each Party agrees that it will not export, directly or indirectly, any technical information acquired from the other Party under this Agreement or any products using such technical information to a location or in a manner that at the time of export requires an export license or other governmental approval, without first obtaining the written consent to do so from the appropriate agency or other governmental entity in accordance with Applicable Law.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!