Facility Protection Equipment Sample Clauses

Facility Protection Equipment. (i) SELLER shall, at its own cost, furnish, install, operate and maintain internal breakers, relays, switches, synchronizing equipment and other associated protective and control equipment necessary to maintain the standard of reliability, quality and safety of electricity production suitable for parallel operation with HELCO's electrical system as required by Good Engineering and Operating Practices. The Facility shall be designed so that it does not trip for an electrical fault or transient condition in HELCO's electrical system that will be cleared by primary protection. HELCO shall have the right, but not the obligation, to review and accept the design of all such equipment and protective relay settings as soon as practicable, and in no event later than forty-five (45) days prior to the Closing Date and shall present any comments relating thereto to SELLER, as soon as practicable and in no event later than sixty (60) days after receiving such design information. HELCO shall have the right, but not the obligation, to review, inspect and comment on any future action by SELLER to modify or replace such equipment, or change such settings, as soon as practicable, and in no event later than least forty-five (45) days prior to such future action; provided, however, HELCO shall present -------- ------- any comments relating thereto to SELLER as soon as practicable, and in no event later than forty-five (45) days after receiving information relating to such future action. HELCO shall have the right, but not the obligation, to review, inspect and accept the installation, construction and setting of all such equipment in order to ensure consistency with the design submitted by SELLER for HELCO's review. If HELCO exercises such right, HELCO shall inform SELLER as soon as practicable, and in no event later than forty-five (45) days after such review or inspection, of any problems it believes exist and any recommendations it has for correcting such problems. HELCO's inspection and acceptance of SELLER's equipment and settings shall not be construed as endorsing the design thereof, nor as any warranty of the safety, durability or reliability of said equipment and settings, nor as a waiver of any of HELCO's rights or constitute any obligation of SELLER; provided, however, that HELCO shall be deemed to have -------- ------- waived its right to review, inspect and accept under this Section 3.2A(6)(i), with respect to any specific design materials, settings, or inspectio...
Sample 1
AutoNDA by SimpleDocs
Facility Protection Equipment. (a) The Seller shall, at its own cost, furnish, install, operate and maintain internal breakers, relays, switches, synchronizing equipment and other associated protective and control equipment necessary to maintain the standard of reliability, quality and safety of electricity production suitable for parallel operation with the Company’s System as required by this Agreement, including, without limitation, Section 3.2C and Good Engineering and Operating Practices. (b) The Expansion Facility and modifications to the Existing Facility shall be designed to meet the requirements of this Agreement. The Seller shall maintain sufficient monitoring and recording equipment as necessary to diagnose cause for loss of power output from the Facility and report the cause as required in Article 4. (c) The Company shall have the right, but not the obligation, to review and accept the design of all such equipment and protective relay settings as soon as practicable, and in no event later than twenty (20) Days after the receipt of all Construction Permits and shall present any comments relating thereto to the Seller, as soon as practicable and in no event later than sixty (60) Days after receiving such design information. (d) The Company shall have the right, but not the obligation, to review and accept any proposed future action by the Seller to modify or replace such equipment, or change such settings,
Sample 1
Facility Protection Equipment 
Sample 1

Related to Facility Protection Equipment

  • System Protection Facilities The Interconnection Customer shall, at its expense, install, operate and maintain System Protection Facilities as a part of the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities. The Participating TO shall install at the Interconnection Customer's expense any System Protection Facilities that may be required on the Participating TO’s Interconnection Facilities or the Participating TO’s Transmission System as a result of the interconnection of the Large Generating Facility and the Interconnection Customer’s Interconnection Facilities.

  • Facilities and Equipment Except as set forth herein, Consultant shall, at its sole cost and expense, provide all facilities and equipment that may be necessary to perform the services required by this Agreement. City shall make available to Consultant only the facilities and equipment listed in this section, and only under the terms and conditions set forth herein. City shall furnish physical facilities such as desks, filing cabinets, and conference space, as may be reasonably necessary for Consultant’s use while consulting with City employees and reviewing records and the information in possession of the City. The location, quantity, and time of furnishing those facilities shall be in the sole discretion of City. In no event shall City be obligated to furnish any facility that may involve incurring any direct expense, including but not limited to computer, long-distance telephone or other communication charges, vehicles, and reproduction facilities.

  • Personal Protective Equipment 64.1 While not being part of any issue of work clothing/equipment supplied (see clause 26), the Employer shall be required to provide personal protective equipment (SAA approved) for use, when necessary for the Employee to perform their required duties including: (a) ear/hearing protection; (b) gloves; and (c) skin protective cream/sun screen (30+/50+ rating). 64.2 In addition, one pair of UV-rated safety glasses or UV-rated clip-ons suitable to overlay prescription spectacles, shall be made available for Employees who are required to work on reflective surfaces such as: (a) metal decking; (b) large concrete slabs exposed to sunlight; (c) roofing; and (d) curtain xxxxxxx.

  • Personal Protective Equipment (PPE Each employee responding to or engaged in fire suppression activities will use the appropriate safety clothing and equipment. Each department is responsible for seeing that CAL/OSHA standards for safety clothing and equipment are provided and used for wildland firefighting. Wildland fire suppression safety clothing and equipment includes:  Safety helmet that meets the minimum standards required by California Code of Regulations (CCR), Title 8, Section 3410.  Goggles, protection that meets the minimum requirements for design, construction and use as required by CCR, Title 8, Sections 3382 and 3404.  Ear protection to comply with CCR, Title 8, Sections 3405 and 3410(c).  Nomex hood, shroud, or equivalent face and neck protection.  Nomex shirt  Nomex pants  Gloves, CAL/OSHA approved for wildland firefighting.  Safety work boots, heavy-duty, lace-type, with deeply lugged soles and heels, and leather tops at least eight inches in height.  Wildland fire shelter

  • Equipment and Facilities For On-Site Courses, you will supply the facility and equipment as set forth at xxx.xxxxxx.xxx/xxxxxxxx/xxxxxxxxx/xxxxxxxxxxxx.xxxx. If Red Hat agrees to provide the training facilities and hardware, you will be liable for any loss or destruction of this equipment and hardware used in connection with the Training.

  • Equipment and Tools 40.01 The Employer will make available all necessary tools and equipment it requires for the performance of work assignments at no cost to the employees. Such tools and equipment will remain the property of the Employer and the employees will be required to take reasonable care of this property and may be required to sign out certain equipment and tools.

  • Protective Equipment Licensee, and its employees and contractors, shall utilize and install adequate protective equipment to ensure the safety of people and facilities, consistent with Applicable Standards. Licensee shall at its own expense install protective devices designed to handle the voltage and current impressed on its Communications Facilities in the event of a contact with the supply conductor, as specified in Applicable Standards. Except as provided in Article 15.1, District shall not be liable for any actual or consequential damages to Licensee’s Communications Facilities or Licensee’s customers’ facilities.

  • Customer Equipment Customer represents and warrants that it owns or has the legal right and authority, and will continue to own or maintain the legal right and authority during the term of this Agreement, to place and use the Customer Equipment as contemplated by this Agreement. Customer further represents and warrants that its placement, arrangement, and use of the Customer Equipment in the Internet Data Centers complies with the Customer Equipment Manufacturer's environmental and other specifications.

  • Safety Equipment Should the employment duties of an employee in the bargaining unit require use of any equipment or gear to insure the safety of the employee or others, the District agrees to furnish such equipment or gear.

  • Equipment Procurement If responsibility for construction of the Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades is to be borne by the Connecting Transmission Owner, then the Connecting Transmission Owner shall commence design of the Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades and procure necessary equipment as soon as practicable after all of the following conditions are satisfied, unless the Developer and Connecting Transmission Owner otherwise agree in writing: 5.5.1 NYISO and Connecting Transmission Owner have completed the Interconnection Facilities Study pursuant to the Interconnection Facilities Study Agreement; 5.5.2 The NYISO has completed the required cost allocation analyses, and Developer has accepted his share of the costs for necessary System Upgrade Facilities and System Deliverability Upgrades in accordance with the provisions of Attachment S of the NYISO OATT; 5.5.3 The Connecting Transmission Owner has received written authorization to proceed with design and procurement from the Developer by the date specified in Appendix B hereto; and 5.5.4 The Developer has provided security to the Connecting Transmission Owner in accordance with Article 11.5 by the dates specified in Appendix B hereto.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!