Indoor Chemical and Pollutant Source Control. Walk off mats are installed at all building main entrances as part of the core and shell scope. • All rooms that contain chemicals or pollutants (such as copy rooms, photo labs, laundry, and janitorial rooms) must be built with deck-to-deck full-height walls and self-closing doors, separate ventilation systems with minimum .50 cfm/sqft exhaust fans, and containment drains for appropriate disposal of hazardous liquids • Tenants must also install MERV – 13 filters for all return and outside air intakes in regularly occupied mechanically ventilated spaces
Indoor Chemical and Pollutant Source Control. The base building has been designed to minimize building occupant exposure to potentially hazardous particulates and chemical pollutants. All Tenant work affecting the entry of pollutants into the building and potential cross contamination of regularly occupied areas must be mitigated through the following strategies, as applicable to the tenant improvements:
Indoor Chemical and Pollutant Source Control. The base building has been designed to minimize building occupant exposure to potentially hazardous particulates and chemical pollutants. All tenant work affecting the entry of pollutants into the building and potential cross contamination of regularly occupied areas must be mitigated through the following strategies, as applicable to the tenant improvements: · Sufficiently exhaust each space where hazardous gases or chemicals may be present or used (e.g. garages, housekeeping and laundry areas and copying and printing rooms) to create negative pressure with respect to adjacent spaces when the doors to the room are closed. For each of these spaces, provide self-closing doors and deck-to-deck partitions or a hard-lid ceiling. The exhaust rate must be at least 0.50 cubic feet per minute (cfm) per square foot (0.15 cubic meters per minute per square meter), with no air recirculation. The pressure differential with the surrounding spaces must be at least 5 Pascals (Pa) (0.02 inches of water gauge) on average and IPa (0.004 inches of water) at a minimum when the doors to the rooms are closed. · In mechanically ventilated buildings, each ventilation system that supplies outdoor air shall comply with the following:
Indoor Chemical and Pollutant Source Control. Tenant shall install walk-off mats at entryways from the exterior of the Premises. Walk-off mats shall be at least 10 feet long in the primary direction of travel at all regular building entry points. Walk-off systems can be either (1) permanent (grilles, grates, or slotted systems) or (2) roll-out mat system that is maintained by a contracted service on a weekly basis. The Base Building September 2016 air handling units have MERV 13 filtration media. Any additional air conditioning units installed by the Tenant shall have filtration media with MERV rating of 13 or higher. If there are any areas with hazardous gas and chemical use within the Premises the following measures shall be installed:
a. A designated exhaust to create negative pressure, with an exhaust rate of 0.5 CFM/SF,
b. Self-closing doors, and;
c. Deck-to-deck partitions or hard-lid ceilings. September 2016
I. CLEANING
Indoor Chemical and Pollutant Source Control. Walk off mats are installed at all building main entrances as part of the core and shell scope. • All rooms that contain chemicals or pollutants (such as copy rooms, photo labs, laundry, and janitorial rooms) must be built with deck-to-deck full-height walls and self-closing doors, separate ventilation systems with minimum .50 cfm/sqft exhaust fans, and containment drains for appropriate disposal of hazardous liquids • Tenants must also install MERV—13 filters for all return and outside air intakes in regularly occupied mechanically ventilated spaces • Indoor Environmental Quality Credit 6, Controllability of Systems—Thermal Comfort • Tenants shall provide thermal and ventilation controls for: • At least 50 percent of the occupants that enable adjustment to suit individual needs and preferences & all shared multi-occupant spaces where transient groups must share controls. • Indoor Environmental Quality Credit 7, Thermal Comfort—Design • HVAC design must meet requirements of ASHRAE 55-2004, specifically in reference to air temperature, radiant temperature, humidity, and air speed Alector TI The Cove — Building 7, Floors 3 & 4 000 Xxxxxx Xxxxx Xxxx. Xxxxx Xxx Xxxxxxxxx, XX Updated 6/21/18 05/15/2018 TI Design Commencement 06/15/2018 Tenant Selection of General Contractor 06/22/2018 Tenant Submission of Final Equipment List 07/20/2018 Tenant Approval of Schematic Plans 07/20/2018 Tenant’s Written Notice of “Additional Base Building Items” 08/03/2018 Tenant Approval of Preliminary Project Budget 08/06/2018 Tenant Submission of HMIS 09/07/2018 Tenant Approval of Final TI Working Drawings
Indoor Chemical and Pollutant Source Control. Walk off mats are installed at all building main entrances as part of the core and shell scope. EXHIBIT B -13- HCP, INC. [The Cove at Oyster Point] [Global Blood Therapeutics, Inc.] • All rooms that contain chemicals or pollutants (such as copy rooms, photo labs, laundry, and janitorial rooms) must be built with deck-to-deck full-height walls and self-closing doors, separate ventilation systems with minimum .50 cfm/sqft exhaust fans, and containment drains for appropriate disposal of hazardous liquids • Tenants must also install MERV – 13 filters for all return and outside air intakes in regularly occupied mechanically ventilated spaces
