Main Building. (a) The Client will not permit guests who are attending a Function or Event access to the Main Building at any time unless they have prior written consent from SP.
(b) The Client must provide all their own furniture, cutlery and glassware. Any chattels contained in the Main Building including but not limited to furniture, cutlery and glassware may not be used for functions or events.
Main Building. The main building will remain locked and is not part of this Agreement. It is not available for renting.
Main Building. Except in the Residential Zone, more than one (1) main building may be placed on a lot in any zone, provided all other provisions of this Bylaw are met.
Main Building a. Reception
i. The service counter in the reception area is 44 inches above the finished floor. Provide a counter on an accessible route such that a portion of the counter is at least 36 inches wide and no more than 36 inches above the finished floor, or provide an auxiliary counter with a maximum height of 36 inches in close proximity to the main counter, or provide equivalent facilitation. Equivalent facilitation may be provided in the form of a folding shelf attached to the main counter, an auxiliary table nearby, a clip board made available to the public, or other means. Standards §§ 4.1.1(2), 4.1.6(1)(b), 7.2(2), 4.1.3(1), 4.3.
b. Unisex, Single-User Toilet Room
i. The toilet room sign is not mounted on the wall adjacent to the latch side of the door. Provide a toilet room sign with raised and Braille characters. The sign shall be mounted on the wall adjacent to the latch side of the door with the centerline of the sign at 60 inches above the finished floor and situated such that a person can approach within 3 inches of the sign without encountering an obstruction or standing within a door swing. Standards §§ 4.1.2(7)(d), 4.30.1, 4.30.4, 4.30.5, 4.30.6. ii. The lock to the door of the toilet room that requires tight grasping, pinching, or twisting of the wrist to operate. Provide a door with hardware usable with one hand and without tight grasping, pinching, or twisting of the wrist. Lever-operated, push-type, and U-shaped handles are acceptable designs. Standards § 4.13.9.
Main Building. Quantity Rate
Main Building. House Air" system operates on a standard office building schedule of 7AM to 6PM on weekdays. Any after hours/weekend cooling required by Tenant will be billed to Tenant on an hourly rate of $24.00 for one side of the building and $39.00 for both sides, with a six hour daily minimum. Said rate shall be adjusted by Landlord from time to time to reflect rate and usage changes. To request this extra service Tenant will phone Landlord and then FAX the main office with Tenant's exact requirements no later than 12 noon on a weekday preceding the after hours or weekend of desired usage.
Main Building. As such, the design of the main dwelling and outbuildings, suitability for use on the Land, adjustment to the natural topography of the lot, orientation, floor levels and use of materials and colours are subject to approval by Harmony Glades Pty Ltd and are to be shown on the submitted drawings. Houses are to be designed to reflect contemporary Australian architecture, taking cognisance of the climatic conditions of the area and the “Estate’s unique location. The Buyer is encouraged to include xxxxx and patios, adding to the articulations of the building and to assist with achieving energy efficiency within the dwelling. Dual Occupancy Dwellings – the Buyer shall not design a duplex or dual occupancy dwelling on a lot (except on a lot clearly and expressly designated as such by the Seller) without first obtaining approval from the Seller to do so. The Buyer (or its representatives or consultants) must not make application or seek approval for such a dwelling from Council prior to having obtained Covenant Approval from Harmony Glades Pty Ltd prior to doing so. The Seller may seek payment of $20,000 payable immediately on demand (“Payment”) in the event that the Buyers breaches its obligations under this clause. In the event of a breach with respect to this clause the Buyer irrevocably empowers and authorises the Seller to lodge a caveat over the Buyers lot or lots until the Payment is made. Face brickwork can only be used as features, infills or courses along the edge of the façade. No face brick will be approved (please see materials). The Buyer is encouraged to design their residence such that it allows for street appeal and a rising profile. Roof Pitches – All roof planes shall be pitched at a minimum slope of 25 degrees. Any alternative roof pitch will require a written request submitted to Harmony Glades Pty Ltd for consideration. An alternative roof pitch will be assessed on its architectural merit and respect for the intent of the development. Xxxxx – Xxxxx must be provided and are to have a minimum of 450mm overhang to all of the building. Outbuildings – Garages, carports, sheds, tool sheds, pergolas and other outbuildings shall be integrated with the design of the dwelling through the use of similar materials and finished to those used in the construction of the main dwelling. Applications for such structure is to be submitted to Harmony Glades Pty Ltd along with the site plan and structure plans stating all dimensions, materials and colours for ap...
Main Building. As such, the design of the main dwelling and outbuildings, suitability for use on the Land, adjustment to the natural topography of the lot, orientation, floor levels, and use of materials and colours are subject to approval by Xxxxxx Trust No 6 and are to be shown on the submitted drawings. Houses are to be designed to reflect contemporary Australian architecture, taking cognisance of the climatic conditions of the area and the estate’s unique location. The Buyer is encouraged to include xxxxx and patios, adding to the articulation of the building and to assist with achieving energy efficiency within the dwelling. Front & Side Elevations - The front elevation and part of the side elevations from the left and right outer edges of the front elevation back to the ‘house to boundary’ fence (approximately 2 metres down the side elevations) shall be either fully rendered to the exposed face or be a combination of render and approved feature materials such as Scyon™ Matrix™ panel, Axon™ panels or similar. Face brink may only be used as a minor feature material, or as infills or courses along the edge of the façade. Full face brick to the front elevation will not be approved (please see materials). The Buyer is encouraged to design their residence such that it allows for street appeal and a rising profile. Roof pitches – All roof planes shall be pitched at a minimum slope of 22.5 degrees except for buildings on lots greater than 300 square metres but less than 450 square metres where a pitch at a minimum slope of 21 degrees is acceptable. Any alternative roof pitch will require a written request submitted to Xxxxxx Trust No 6 for consideration. An alternative roof pitch will be assessed on its architectural merit and respect for the intent of the development. The creative use of skillion roof design is encouraged and acceptable and shall be considered for approval based on its merit and creative design. Xxxxx – Xxxxx must be provided and are to have a minimum of 600mm overhang to all of the building lots over 450m2. For lots under 450m2 xxxxx must have a minimum overhang of 400mm to all of the building. Gables – Large gables fronting the street are discouraged however where they are proposed they should be enhanced with feature treatments such as Scyon™ Matrix™ panel, Axon™ panels, horizontal stained timber or metal powder coated slats, or similar treatments, to enhance the visual appeal of the building from the street. Outbuildings – Garages, carports, sheds, to...
Main Building i. There is no accessible route to the main building. Provide at least one accessible route within the boundary of the site to this element that, to the maximum extent feasible, coincides with the route for the general public. The accessible route must have a minimum clear width of 36 inches, or a minimum clear width of 42 inches if there is a turn around an obstruction less than 48 inches wide; have passing spaces at least 60 inches by 60 inches at least every 200 feet; have a minimum clear headroom of 80 inches; have a surface that is firm, stable, and slip resistant; have, in the absence of a curb ramp, ramp, elevator, or platform lift, no level changes in excess of 1/2 inch vertically; and have a running slope of less than 1:20 (5%) (or have been constructed as a fully accessible ramp) and a cross slope of less than 1:50 (2%). Standards §§ 4.1.3(1), 4.3, 4.5, Fig. 7.
Main Building. An initial rental of £ [in figures] (in words) exclusive of business rates, service charge, insurance rent and VAT.