Order content Sample Clauses

Order content. The Access Seeker shall ensure that the order contains the following information to enable MYTV to access and fulfil the order; (a) the Services to which access is requested; (b) a requested date and time for delivery; (c) the location of the points of delivery; (d) equipment of the Access Seeker to be used in connection with the Order, to the extent it may adversely affect the MYTV’s Network; and (e) such other information that MYTV reasonably requires in order for it to provision access to the Services as requested by the Access Seeker, provided that such information shall not include any information which:
AutoNDA by SimpleDocs
Order content. 1.2.1 SACOFA may require an Access Seeker to provide it with an Order which outlines the Access Seeker’s access requirements. SACOFA may request an Access Seeker to provide, at a level of detail (sufficient for planning provisioning), the following in an Order for access to Facilities and/or Services: (a) the Facilities and/or Services or both to which access is requested; (b) a requested time for delivery; (c) the detailed address of the location of the points of delivery and the location maps; (d) Equipment of the Access Seeker to be used in connection with the Order; (e) the configuration of the requested Facilities and/or Services; (f) contact person and telephone number; and (g) such other information that SACOFA reasonably requires in order for it to plan for the provision of access to the Facilities and/or Services as requested by the Access Seeker. For Infrastructure Sharing, the form of Order shall be Infrastructure Order Form (IOF) (Annexure A)
Order content. (1) The type and purpose of the processing of personal data by the contractor for the client are specifically described in the service agreement. (2) The provision of the contractual data processing shall take place exclusively in a mem- ber state of the European Union or in another state party to the Agreement on the European Economic Area. Any relocation to a third country requires the prior consent of the client and may only take place if the special requirements of Art. 44 et seq. GDPR are fulfilled. (3) The subject matter of the processing of personal data is specifically described in the service agreement; this includes in particular the following data types/categories: Customer data, billing data, user accesses and passwords. (4) The categories of data subjects affected by the processing include customers of the client. (1) The Contractor shall document the implementation of the necessary technical and or- ganisational measures set out in the run-up to the award of the contract before the start of processing, in particular with regard to the specific execution of the contract, and hand them over to the Client. (2) The Contractor shall establish security in accordance with Art. 28 para. 3 lit. c, 32 GDPR, in particular in conjunction with Art. 5 para. 1, para. 2 GDPR. Overall, the measures to be taken are data security measures and measures to ensure a level of protection ap- propriate to the risk with regard to the confidentiality, integrity, availability and resi- lience of the systems. The state of the art, the implementation costs and the nature, scope and purposes of the processing as well as the different probability of occurrence and severity of the risk to the rights and freedoms of natural persons within the mean- ing of Art. 32 para. 1 GDPR must be taken into account. The contracting parties have agreed the details of this in Annex 1 to this regulation on order processing. (3) The technical and organisational measures are subject to technical progress and further development. In this respect, the Contractor is authorised to implement alternative adequate measures. In doing so, the security level of the specified measures must not be undercut. Significant changes must be documented.
Order content. All Supplies ordered by The FAP shall be identified by a Pilatus part number as per the Annual Price List applicable at the time of order, except in cases where the subject item is not listed in the Annual Price List when the vendor’s part number shall be used. The Order shall include details of shipment if different to the Agreement terms. All Orders shall indicate CACE- Order reference number.

Related to Order content

  • User Content 13.1 The Site permits the submission and posting of questions and answers in connection with Evaluation Processes and may also permit the submission and posting of other text and/or other content submitted by you and other users (all of the foregoing, collectively, “User Submissions”), and the hosting, sharing, and/or publishing of such User Submissions. You understand that whether or not such User Submissions are published, the Company does not guarantee any confidentiality with respect to any User Submissions. You acknowledge that you shall not be due any remuneration in connection with your User Submissions from the Company or from any other User. 13.2 You shall be solely responsible for your own User Submissions and the consequences of posting or publishing them. In connection with your User Submissions, you affirm, represent, and/or warrant that: (i) your submission of User Submissions and the publication and use thereof by the Company does not violate the copyrights, trade secrets rights or other intellectual property rights of any third party, nor shall it constitute or result in a breach of any duty or obligation of confidentiality owed by you to any third party, and (ii) you have the written consent, release, and/or permission of each and every identifiable individual person in the User Submission to use the name or likeness of each and every such identifiable individual person to enable inclusion and use of the User Submissions in the manner contemplated by the Company and this Agreement. 13.3 By submitting User Submissions to the Site, you hereby grant to the Company a perpetual, irrevocable, worldwide, royalty-free, transferable, sublicensable right and license to use, reproduce, modify, distribute and exploit such User Submission in any manner and in any form of media, whether currently or hereafter existing. You represent and warrant that you have all necessary right, title and interest in and to each such User Submission to validly grant such license to the Company. 13.4 In connection with User Submissions and any other transmission of messages or material facilitated by the Site, you further agree that you will not: (i) submit or transmit material that is not authorized by the copyright owner, protected by trade secret or otherwise subject to third party proprietary rights, including privacy and publicity rights, unless you are the owner of such rights or have permission from their rightful owner to post the material and grant the rights granted to the Company in Section 13.3 above; (ii) publish or transmit falsehoods or misrepresentations that could damage the Company or any third party; (iii) submit or transmit material that is unlawful, defamatory, libelous, threatening, pornographic, harassing, hateful, racially or ethnically offensive or encourages conduct that would be considered a criminal offense, give rise to civil liability, violate any law or is otherwise inappropriate; (iv) post or transmit advertisements or solicitations of business; or (v) impersonate another person. If notified by a user or a content owner of a User Submission that allegedly does not conform to this Agreement, the Company may investigate the allegation and determine in good faith and in its sole discretion whether to remove the User Submission, which it reserves the right to do at any time. Additionally, the Company may, at any time, remove any User Submission that in the sole judgment of the Company violates this Agreement. 13.5 User Submissions may be provided by (without limitation) Users who are members of a Start-Up management team, contacts referred by Start-Ups (including without limitation customers, scientific advisors, background references, suppliers and distributors), external experts referred by the Company. The insights, recommendations, views and other content reflected in a User Submission should be taken as opinion rather than statements of facts. Investors should conduct their own diligence before making an investment. Nothing contained in a User Submission constitutes tax, legal, insurance or investment advice, or the recommendation of or an offer to sell, or the solicitation of an offer to buy or invest in, any investment product, vehicle, service or instrument. Such an offer or solicitation may only be made by delivery to a prospective investor of formal offering materials, including subscription or account documents or form, which should be reviewed carefully by any such investor before making the decision to invest in any particular company issuer listed, reviewed or discussed on the Propel(x) platform. To the maximum extent permitted under applicable law, you hereby release Propel(x) (and our officers, directors, agents, investors, subsidiaries, and employees) and each other User from any and all claims, demands, liabilities, losses or damages (whether direct, indirect, consequential, incidental or otherwise) of every kind and nature, known and unknown, suspected or unsuspected, arising out of or in any way related to User Submissions (including your reliance thereon). You acknowledge that, in connection with the foregoing release, you hereby irrevocably waive all rights granted to you under Section 1542 of the California Civil Code or any analogous applicable state or federal law or regulation. Said Section 1542 of the Civil Code of the State of California reads as follows:

  • Customer Content As part of the Services provided under this Agreement, Customer Data will be stored and processed in the data center region specified in the applicable Ordering Document. Axway shall not access Customer Content except in response to support or technical issues where Customer provides Axway with prior Customer’s written authorization required to access such Customer Content. Axway is not responsible for unauthorized access, alteration, theft or destruction of Customer Content arising from Customer’s own or its authorized users’ actions or omissions in contravention of the Documentation. Customer’s ability to recover any lost data resulting from Axway’s misconduct is limited to restoration by Axway from the most recent back-up.

  • Your Content Certain of our Services may a low you to upload, post, transmit or make available content and materials to or through them(“Your Content”). You agree that you are responsible for Your Content and we sha l not, except as otherwise set forth herein, be responsible for Your Content. You represent that you own a l Inte lectual Property Rights (as defined below) in Your Content.

  • Start-Up and Synchronization Consistent with the mutually acceptable procedures of the Developer and Connecting Transmission Owner, the Developer is responsible for the proper synchronization of the Large Generating Facility to the New York State Transmission System in accordance with NYISO and Connecting Transmission Owner procedures and requirements.

  • Mail Order Catalog Warnings In the event that, the Settling Entity prints new catalogs and sells units of the Products via mail order through such catalogs to California consumers or through its customers, the Settling Entity shall provide a warning for each unit of such Product both on the label in accordance with subsection 2.4 above, and in the catalog in a manner that clearly associates the warning with the specific Product being purchased. Any warning provided in a mail order catalog shall be in the same type size or larger than other consumer information conveyed for such Product within the catalog and shall be located on the same display page of the item. The catalog warning may use the Short-Form Warning content described in subsection 2.3(b) if the language provided on the Product label also uses the Short-Form Warning.

  • THIRD PARTY WEBSITES AND CONTENT The Website contains (or you may be sent through the Website or the Company Services) links to other websites ("Third Party Websites") as well as articles, photographs, text, graphics, pictures, designs, music, sound, video, information, applications, software and other content or items belonging to or originating from third parties (the "Third Party Content"). Such Third Party Websites and Third Party Content are not investigated, monitored or checked for accuracy, appropriateness, or completeness by us, and we are not responsible for any Third Party Websites accessed through the Website or any Third Party Content posted on, available through or installed from the Website, including the content, accuracy, offensiveness, opinions, reliability, privacy practices or other policies of or contained in the Third Party Websites or the Third Party Content. Inclusion of, linking to or permitting the use or installation of any Third Party Website or any Third Party Content does not imply approval or endorsement thereof by us. If you decide to leave the Website and access the Third Party Websites or to use or install any Third Party Content, you do so at your own risk and you should be aware that our terms and policies no longer govern. You should review the applicable terms and policies, including privacy and data gathering practices, of any website to which you navigate from the Website or relating to any applications you use or install from the Website. Any purchases you make through Third Party Websites will be through other websites and from other companies, and Company takes no responsibility whatsoever in relation to such purchases which are exclusively between you and the applicable third party. Company reserves the right but does not have the obligation to:

  • Programming Processor is not responsible for programming or reprogramming of fuel dispensers.

  • PARTY WEBSITES AND CONTENT The Site may contain (or you may be sent via the Site) links to other websites ("Third- Party Websites") as well as articles, photographs, text, graphics, pictures, designs, music, sound, video, information, applications, software, and other content or items belonging to or originating from third parties ("Third-Party Content"). Such Third-Party Websites and Third-Party Content are not investigated, monitored, or checked for accuracy, appropriateness, or completeness by us, and we are not responsible for any Third-Party Websites accessed through the Site or any Third-Party Content posted on, available through, or installed from the Site, including the content, accuracy, offensiveness, opinions, reliability, privacy practices, or other policies of or contained in the Third-Party Websites or the Third-Party Content. Inclusion of, linking to, or permitting the use or installation of any Third-Party Websites or any Third-Party Content does not imply approval or endorsement thereof by us. If you decide to leave the Site and access the Third-Party Websites or to use or install any Third-Party Content, you do so at your own risk, and you should be aware these Terms and Conditions no longer govern. You should review the applicable terms and policies, including privacy and data gathering practices, of any website to which you navigate from the Site or relating to any applications you use or install from the Site. Any purchases you make through Third- Party Websites will be through other websites and from other companies, and we take no responsibility whatsoever in relation to such purchases which are exclusively between you and the applicable third party. You agree and acknowledge that we do not endorse the products or services offered on Third-Party Websites and you shall hold us harmless from any harm caused by your purchase of such products or services. Additionally, you shall hold us harmless from any losses sustained by you or harm caused to you relating to or resulting in any way from any Third-Party Content or any contact with Third-Party Websites.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

  • Synchronization The Licensor hereby grants limited synchronization rights for One (1) music video streamed online (Youtube, Vimeo, etc..) for up to 500,000 non-monetized video streams on all total sites. A separate synchronisation license will need to be purchased for distribution of video to Television, Film or Video game.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!