Product Quality (a) Tesoro warrants that all Products delivered under this Agreement or any Purchaser Order shall meet the latest applicable pipeline specifications or otherwise mutually agreed upon specifications for that Product upon receipt at the applicable Terminal and contain no deleterious substances or concentrations of any contaminants that may make it or its components commercially unacceptable in general industry application. Tesoro shall not deliver to any of the Terminals any Products which: (i) would in any way be injurious to any of the Terminals; (ii) would render any of the Terminals unfit for the proper storage of similar Products; (iii) would contaminate or otherwise downgrade the quality of the Products stored in commingled storage; (iv) may not be lawfully stored at the Terminals; or (v) otherwise do not meet applicable Product specifications for such Product that are customary in the location of the Terminal. If, however, there are Products that do not have such applicable specifications, the specifications shall be mutually agreed upon by the Parties. Should Tesoro’s commingled Products not meet or exceed the minimum quality standards set forth in this Agreement or any applicable Terminal Service Order, Tesoro shall be liable for all loss, damage and cost incurred thereby, including damage to Products of third parties commingled with Tesoro’s unfit Products.
(b) TLO shall have the right to store compatible Products received for Tesoro’s account with Products belonging to TLO or third parties in TLO’s commingled storage tanks. TLO shall handle Tesoro’s fungible Products in accordance with TLO’s prevailing practices and procedures for handling such Products. The quality of all Products tendered into commingled storage for Tesoro’s account shall be verified either by Tesoro’s refinery analysis or supplier’s certification, such that Products so tendered shall meet TLO’s Product specifications. All costs for such analysis shall be borne solely by Tesoro. TLO shall have the right to sample any Product tendered to the Terminals hereunder. The cost of such sampling shall be borne solely by TLO. All Products returned to Tesoro shall meet or exceed Product specifications in effect on the date the Products are delivered to Tesoro. Notwithstanding any other provision herein, any and all Products that leave the Terminals shall meet all relevant ASTM, EPA, federal and state specifications, and shall not leave the Terminals in the form of a sub-octane grade Product.
(c) TLO shall exercise reasonable care to ensure that all Products delivered by third parties into commingled storage with Tesoro’s Products meet applicable Product specifications for such Product that are customary in the location of the Terminal. In the event that Tesoro’s Products are commingled with third-party Products that do not meet or exceed the minimum quality standards set forth in this Agreement or any Terminal Service Order, TLO shall be liable for all loss, damage and cost incurred thereby.
Quality- and Cost-Based Selection Except as ADB may otherwise agree, the Borrower shall apply quality- and cost-based selection for selecting and engaging consulting services.
Health and Safety Plan Consultant shall prepare and submit a Health and Safety Plan (“HASP”) for the portion of Consultant’s work that will involve field work, assessments, or investigations of certain Project elements. The HASP shall describe how Consultant plans to complete field work, assessments, and/or investigations at the RWF. Consultant’s HASP must comply with the CIP HASP and shall be updated as new conditions are encountered.
CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
Work Health and Safety (a) The employer and employee acknowledge their responsibilities under the Work Health and Safety Act 2011 and Work Health and Safety Regulations 2012.
(b) Where there is a Work Health and Safety Representative they must be elected and will carry out the tasks associated with the role of Work Health and Safety Representative set out within the Work Health and Safety Act 2011.
Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.
COUNTY’S QUALITY ASSURANCE PLAN The County or its agent will evaluate the Contractor’s performance under this Contract on not less than an annual basis. Such evaluation will include assessing the Contractor’s compliance with all Contract terms and conditions and performance standards. Contractor deficiencies which the County determines are severe or continuing and that may place performance of the Contract in jeopardy if not corrected will be reported to the Board of Supervisors. The report will include improvement/corrective action measures taken by the County and the Contractor. If improvement does not occur consistent with the corrective action measures, the County may terminate this Contract or impose other penalties as specified in this Contract.
Quality Assurance/Quality Control Contractor shall establish and maintain a quality assurance/quality control program which shall include procedures for continuous control of all construction and comprehensive inspection and testing of all items of Work, including any Work performed by Subcontractors, so as to ensure complete conformance to the Contract with respect to materials, workmanship, construction, finish, functional performance, and identification. The program established by Contractor shall comply with any quality assurance/quality control requirements incorporated in the Contract.
ARTICLE HEALTH AND SAFETY The Employer and the Union agree that they mutually desire to maintain standards of safety and health in the Home, in order to prevent injury and illness and abide by the Occupational Health and Safety Act as amended from time to time. Scheduled time spent in such meetings is to be considered time worked for which shall be paid by the Employer at his or her regular or overtime rate. Minutes shall be taken of all meetings and copies shall be sent to the Committee members. Minutes of the meetings shall be posted on the workplace health safety bulletin board. The Employer shall provide the time from work with pay and all related tuition costs and expenses necessary to certify the worker representative. Where an inspector makes an inspection of a workplace under the powers conferred upon or her under the Occupational Health and Safety Act, the employer shall afford a certified committee member representing workers the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. Where a worker certified member is not on-site and available, the Employer shall afford a worker health and safety representative if any, or a worker selected by a Union, because of knowledge, experience and training, to represent it, the opportunity to accompany the inspector during his or her physical inspection of a workplace, or any part or parts thereof. Two (2) representatives of the Joint Health and Safety Committee, one (I) from management and one (1) from the employees, shall make monthly inspections of the work place and shall report to the health and safety committee the results of their inspection. The members of the Committee who represent the workers shall designate a member representing workers to inspect the workplace. Where possible that member shall be a certified member. The employer shall provide the member with such information and assistance as the member may require for the purpose of carrying out an inspection of the workplace. In the event of accident or injury, such representatives shall be notified immediately and shall investigate and report as soon as possible to the committee and to the Employer on the nature and causes of the accident or injury. Furthermore, such representatives must be notified of the inspection of a government inspector and shall have the right to accompany him on his inspections. Scheduled time spent in all such activities shall be considered as time worked. The Joint Health and Safety Committee and the representatives thereof shall have access to the annual summary of data from the relating to the number of work accident fatalities, the number of lost workday cases, the number of lost workdays, the number of non-fatal cases that required medical aid without lost workdays, the incidence of occupational injuries, and such other data as the may decide to disclose. It is and agreed that no information will be provided to the Committee which is confidential. This information shall be a standing item recorded in the minutes of each meeting. The Union will use its best efforts to obtain the full co-operation of its membership in the compliance of all safety rules and practices. The Employer will use its best efforts to make all affected direct care employees aware of residents who have serious infectious diseases. The nature of the disease need not be disclosed. Employees will be made aware of special procedures required of them to deal with these circumstances. The parties agree that all employees are aware of the requirement to practice universal precautions in all circumstances. The parties further agree that suitable subjects for discussion at the joint Labour Management Committee will include aggressive residents. The Employer will review with the Joint Occupational Health and Safety Committee written policies to 'address the management of violent behaviour. Such policies will include but not be limited to:
EMHS Governance, Safety and Quality Requirements 4.1 Participates in the maintenance of a safe work environment.
4.2 Actively participates in the Peak Performance program.
4.3 Supports the delivery of safe patient care and the consumers’ experience including participation in continuous quality improvement activities in accordance with the requirements of the National Safety and Quality Health Service Standards and other recognised health standards.
4.4 Completes mandatory training (including safety and quality training) as relevant to role.
4.5 Performs duties in accordance with the EMHS Vision and Values, WA Health Code of Conduct, Occupational Safety and Health legislation, the Disability Services Act and the Equal Opportunity Act and Government, WA Health, EMHS and Departmental / Program specific policies and procedures.
