Production Process Controls Sample Clauses

Production Process Controls. The Seller will maintain documented production assembly & test work instructions (SOPs). A complete set of all production SOPs, including test procedures will be made available in English to the Buyer’s Quality Representative upon request. The Seller will also perform process capability studies for their internal and critical Tier 1 sub-supplier’s production processes to ensure the process is capable of producing product at [Confidential Treatment has been requested] FPY quality level. The Seller will review the results of these process evaluations with the Buyer’s QA Representative and identify areas of concern related to product quality and production capacity limitations.
Sample 1
AutoNDA by SimpleDocs
Production Process Controls. Supplier will ensure that all processes that directly affecting the quality of products and/or rendered services, are clearly defined and conforming to Purchaser purchasing specification requirements applicable to Purchaser. Supplier’s process controls will include, but not limited to: • Documented procedures defining the manner in which processes are to be performed and measured. • Use of suitable equipment and environment to produce products or services. • Monitoring and controlling of critical process parameters and product characteristics using in-process inspection and where appropriate, supporting with statistical methods. The evaluation of the produced products/rendered services will be performed per Purchaser established critical to quality (CTQ) dimensional requirements as signified through patient risk criticality. • Supplier will be required to demonstrate risk mitigation of process risk per ISO 14971 (i.e., pFMEA (Process Supplier Quality Agreement Supplier Name / Location (Town & Country) ZBV-AQF-FOR-022-09 (CF06028 rev 3) Failure Mode Effect Analysis), or relevant risk management tools). • Documented changes to production and process controls. • Trained qualified personnel to perform operations on Purchaser products and/or executed services. For example, where certifications are required (i.e., Fluorescent Penetrant Inspection (FPI), X-Ray, welding, etc.) only certified operators are to perform these operations. • Defined and controlled criteria for workmanship standards. • System(s) to protect Purchaser’s products from contamination by unapproved foreign materials.
Sample 1

Related to Production Process Controls

  • Access Controls The system providing access to PHI COUNTY discloses to 20 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY 21 must use role based access controls for all user authentications, enforcing the principle of least privilege.

  • Evaluation Process ‌ A. The immediate supervisor will meet with an employee at the start of their review period to discuss performance expectations. The employee will receive copies of their performance expectations as well as notification of any modifications made during the review period. Employee work performance will be evaluated during probationary, trial service and transition review periods and at least annually thereafter. Notification will be given to a probationary or trial service employee whose work performance is determined to be unsatisfactory. B. The supervisor will discuss the evaluation with the employee. The employee will have the opportunity to provide feedback on the evaluation. The discussion may include such topics as: 1. Reviewing the employee’s performance; 2. Identifying ways the employee may improve their performance; 3. Updating the employee’s position description, if necessary; 4. Identifying performance goals and expectations for the next appraisal period; and 5. Identifying employee training and development needs. C. The performance evaluation process will include, but not be limited to, a written performance evaluation on forms used by the Employer, the employee’s signature acknowledging receipt of the forms, and any comments by the employee. A copy of the performance evaluation will be provided to the employee at the time of the review. A copy of the final performance evaluation, including any employee or reviewer comments, will be provided to the employee. The original performance evaluation forms, including the employee’s comments, will be maintained in the employee’s personnel file. D. If an employee disagrees with their performance evaluation, the employee has the right to attach a rebuttal. E. The performance evaluation process is subject to the grievance procedure in Article 30. The specific content of a performance evaluation is not subject to the grievance procedure. F. Performance evaluations will not be used to initiate personnel actions such as transfer, promotion, or discipline.

  • Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.

  • Disturbance Analysis Data Exchange The Parties will cooperate with one another and the NYISO in the analysis of disturbances to either the Large Generating Facility or the New York State Transmission System by gathering and providing access to any information relating to any disturbance, including information from disturbance recording equipment, protective relay targets, breaker operations and sequence of events records, and any disturbance information required by Good Utility Practice.

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CSTC chooses to subtend a Verizon access Tandem, CSTC’s NPA/NXX must be assigned by CSTC to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 CSTC shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from CSTC’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office CSTC utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow CSTC’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Calibration The comparison of a measurement system or device of unverified accuracy with a measurement system of known and greater accuracy to detect deviation of the unverified measurement system from required performance specifications (of the unverified measurement system or device) and to quantify all measured values to applicable units of the international system of units.

  • Quality Management System Supplier hereby undertakes, warrants and confirms, and will ensue same for its subcontractors, to remain certified in accordance with ISO 9001 standard or equivalent. At any time during the term of this Agreement, the Supplier shall, if so instructed by ISR, provide evidence of such certifications. In any event, Supplier must notify ISR, in writing, in the event said certification is suspended and/or canceled and/or not continued.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!