Signaling Transfer Points (STPs Sample Clauses

Signaling Transfer Points (STPs. 9.4.1 Definition - Signaling Transfer Points is a signaling network function that includes all of the capabilities provided by the signaling transfer point switches (STPs) and their associated signaling links which enable the exchange of SS7 messages among and between switching elements, database elements and signaling transfer point switches.
AutoNDA by SimpleDocs
Signaling Transfer Points (STPs. 2.10.1 The STP element is a signaling network function that includes all of the capabilities provided by the STP switches which enable the exchange of SS7 messages between switching elements, database elements and signaling transfer point switches via associated signaling links. STP includes the associated link interfaces. 2.10.2 The STP routes signaling traffic generated by action of Carrier to the destination defined by the SBC-12STATE’s signaling network. Integrated services digital network user (ISUP) and Translational Capabilities Application Part (TCAP) signaling traffic addressed to SPs associated with Carrier set of links will be routed to Carrier. 2.10.3 SS7 Transport will apply to SS7 messages transported on behalf of Carrier from an SBC-12STATE designated STP pair to a to an SBC- 12STATE STP pair located in a different LATA. In SBC- AMERITECH this arrangement will only be provided for STPs located in the same state. In SBC-7STATE, the rate, per octet, will apply to octets comprising ISUP and TCAP messages. In SBC- AMERITECH the Signal Switching and Signal Transport rates will apply to ISUP and TCAP messages. In SBC-2STATE, SS7 transport is not available. However, transit signaling provides the ability for an interconnecting network (ICN) to pass signaling information through the SBC-2STATE network to a third party without requiring a trunking connection by a third party with SBC- 2STATE.
Signaling Transfer Points (STPs. 9.2.8.2.7.1 The STP element is a signaling network functio n that includes all of the capabilities provided by the STP switches which enable the exchange of SS7 messages between switching elements, database elements and signaling transfer point switches via associated signaling links. STP includes the associated link interfaces. 9.2.8.2.7.2 SS7 Transport will apply to SS7 messages transported on behalf of CLEC from a SBC-AMERITECH designated STP pair to a SBC-AMERITECH STP pair located in a different LATA. In SBC-AMERITECH this arrangement will only be provided for STPs located in the same state. The Signal Switching and Signal Transport rates will apply to ISUP and TCAP messages. 9.2.8.2.7.3 In such instance as CLEC utilizes SBC- AMERITECH’s Local Switching Network Element, CLEC does not separately order SS7 signaling under this method. CLEC will be charged for the use of the SBC-AMERITECH SS7 signaling on a per call basis.
Signaling Transfer Points (STPs. 12.1 Definition: 12.1.1 BA’s CCS Access Service (CCSAS) allows interconnected carriers to exchange signaling information over a communications path which is separate from the message path. The discretely rated network termination point where this interconnection takes place is called the BA STP port termination. 12.1.2 Each CCSAS signaling connection provides for two-way digital transmission at speeds of 56 kbps. The connection to BA’s STP pair can be made from either the carrier’s SP, which requires a minimum of two 56 kbps circuits, or from the carrier’s STP pair, which requires a minimum of four 56 kbps circuits. 12.1.3 STP locations are set forth in National Exchange Carrier Association (NECA) Tariff F.C.C. No.
Signaling Transfer Points (STPs. 3.1 Definition. Signaling Transfer Points (STPs) provide functionality that enable the exchange of SS7 messages among and between switching elements, database elements and signaling transfer points. 3.2 Technical Requirements - Signaling Transfer Points 3.2.1 STPs must provide access to all other Network Elements connected to the SBC MISSOURI SS7 network. These include: 3.2.1.1 SBC MISSOURI Local Switching or Tandem Switching; 3.2.1.2 SBC MISSOURI Service Control Points/DataBases; 3.2.1.3 Third-party local or Tandem Switching Systems; and 3.2.1.4 Third-party-provided STPs. 3.2.2 The connectivity provided by STPs must fully support the functions of all other Network Elements connected to SBC MISSOURI's SS7 network. This explicitly includes the use of SBC MISSOURI's SS7 network to convey messages which neither originate nor terminate at a signaling end point directly connected to the SBC MISSOURI SS7 network (i.e., transit messages). When the SBC MISSOURI SS7 network is used to convey transit messages, there must be no alteration of the Integrated Services Digital Network User Part (ISDNUP) or Transaction Capabilities Application Part (TCAP) user data that constitutes the content of the message. 3.2.3 If a SBC MISSOURI tandem Switch routes calling traffic, based on dialed or translated digits, on SS7 trunks between an MCIm local Switch and third party local Switch, SBC MISSOURI's SS7 network must convey the TCAP messages that are necessary to provide Call Management features (Automatic Callback, Automatic Recall, and Screening List Editing) between the MCIm local STPs and the STPs that provide connectivity with the third party local Switch, even if the third party local Switch is not directly connected to SBC MISSOURI's STPs. 3.2.4 STPs must provide all functions of the Message Transfer Port (“MTP”). This includes: 3.2.4.1 Signaling Data Link functions; 3.2.4.2 Signaling Link functions; and 3.2.4.3 Signaling Network Management functions. 3.2.5 STPs must provide all functions of the SCCP necessary for Class 0 (basic connectionless) service. In particular, this includes Global Title Translation (GTT) and SCCP Management procedures. 3.2.6 In cases where the destination signaling point is a SBC MISSOURI local or tandem switching system or database, or is an MCIm or third party local or tandem switching system directly connected to SBC MISSOURI's SS7 network, SBC MISSOURI STPs must perform final GTT of messages to the destination and SCCP Subsystem Management of ...
Signaling Transfer Points (STPs. 9.2.8.2.7.1 The STP element is a signaling network function that includes all of the capabilities provided by the STP switches which enable the exchange of SS7 messages between switching elements, database elements and signaling transfer point switches via associated signaling links. STP includes the associated link interfaces. 9.2.8.2.7.2 SS7 Transport will apply to SS7 messages transported on behalf of CLEC from a SBC designated STP pair to a SBC STP pair located in a different LATA. In SBC this arrangement will only be provided for STPs located in the same state. The Signal Switching and Signal Transport rates will apply to ISUP and TCAP messages. 9.2.8.2.7.3 In such instance as CLEC utilizes SBC’s Local Switching Network Element, CLEC does not separately order SS7 signaling under this method. CLEC will be charged for the use of the SBC SS7 signaling on a per call basis.
Signaling Transfer Points (STPs. BA will provide MCIm with unbundled access to its STPs enabling MCIm to activate its own signaling link transport in lieu of BA provided signaling link transport. In addition, STP connections will be provided to MCIm as requested to support interconnection at either or both MCIm’s STPs or switches to BA’s STPs.
AutoNDA by SimpleDocs
Signaling Transfer Points (STPs. The STP element is a signaling network function that includes all of the capabilities provided by the STP switches which enable the exchange of SS7 messages between switching elements, database elements and signaling transfer point switches via associated signaling links. STP includes the associated link interfaces.
Signaling Transfer Points (STPs 

Related to Signaling Transfer Points (STPs

  • Compressed Work Week The Company and Union recognize the concept of the compressed work week. It is further understood that the compressed work week conditions will apply only to those departments that are on the compressed work week.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where Xxxx has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to Xxxx. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for Xxxx (e.g. hairpinning): 1. Roll the circuit(s) from the IDLC to any spare copper that exists to the customer premises. 2. Roll the circuit(s) from the IDLC to an existing DLC that is not integrated. 3. If capacity exists, provide "side-door" porting through the switch. 4. If capacity exists, provide "Digital Access Cross Connect System (DACS)- door" porting (if the IDLC routes through a DACS prior to integration into the switch). 2.6.2 Arrangements 3 and 4 above require the use of a designed circuit. Therefore, non- designed Loops such as the SL1 voice grade and UCL-ND may not be ordered in these cases. 2.6.3 If no alternate facility is available, and upon request from Xxxx, and if agreed to by both Parties, BellSouth may utilize its Special Construction (SC) process to determine the additional costs required to provision facilities. Xxxx will then have the option of paying the one-time SC rates to place the Loop.

  • Delivery Points ‌ Project water made available to the Agency pursuant to Article 6 shall be delivered to the Agency by the State at the delivery structures established in accordance with Article 10.

  • NYISO and Connecting Transmission Owner Obligations Connecting Transmission Owner and NYISO shall cause the New York State Transmission System and the Connecting Transmission Owner’s Attachment Facilities to be operated, maintained and controlled in a safe and reliable manner in accordance with this Agreement and the NYISO Tariffs. Connecting Transmission Owner and NYISO may provide operating instructions to Developer consistent with this Agreement, NYISO procedures and Connecting Transmission Owner’s operating protocols and procedures as they may change from time to time. Connecting Transmission Owner and NYISO will consider changes to their respective operating protocols and procedures proposed by Developer.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!