Technical Requirements and Specifications Sample Clauses

Technical Requirements and Specifications. At its own expense, Licensee shall erect, install, repair and maintain its Wireless Installations in safe condition and good repair in accordance with
Sample 1Sample 2Sample 3See All (15)
AutoNDA by SimpleDocs
Technical Requirements and Specifications. At its own expense, Licensee shall erect, install, repair and maintain its Structures and Wireless Facilities in safe condition and good repair in accordance with this Agreement, the Design Standards, Application, Permit, and any other Laws.
Sample 1
Technical Requirements and Specifications. At its own expense, Licensee shall erect, install, repair and maintain its Wireless Installations in safe condition and good repair in accordance with (a) the requirements and specifications of Safety Codes; (b) Licensor’s reasonable standards, and (c) any current or future rules or orders of the FCC, the State public utility commission, or any other federal, state or local authority having jurisdiction. Changes to the requirements, specifications, standards, rules and orders in subsections (a), (b) and (c) shall not apply retroactively unless required by Laws, and Licensor shall give at least sixty (60) days’ written notice of changes to the standards in subsection (c).
Sample 1
Technical Requirements and Specifications. At its own expense, Licensee shall erect, install, repair and maintain its Equipment in safe condition and good repair in accordance with (1) the requirements and specifications of Safety Codes; (2) the Township Code and the Township’s reasonable standards, and (3) any current or future rules or orders of the FCC, the State public utility commission, or any other federal, state or local authority having jurisdiction. Changes to the requirements, specifications, standards, rules and orders in subsections (1), (2) and (3) shall not apply retroactively unless required by the Law.
Sample 1
Technical Requirements and Specifications. Seller shall adhere to all quality processes, technical requirements, and specifications set forth in the Contract and otherwise reasonably communicated by Purchaser. The Products shall conform to the design and drawings referenced below (including any technical requirements and specifications incorporated therein), provided that, the Products may be subject to further design changes implemented during the course of development and the ED&D Work. Final design and technical requirements applicable to the Products shall be as finally released by Purchaser. Part Name Rivian Part Number Rivian CA Release Number Revision Level [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***] [***]
Sample 1
Technical Requirements and Specifications. 1.1 GENERAL The Contractor shall furnish all engineering, procurement and construction work, and all equipment, materials, tools and other requirements necessary to provide a complete pipeline in accordance with the requirements and scope of work of this Appendix A. The technical requirements and specifications in this section describe the design basis and minimum level of quality for equipment, systems, materials and work. The pipeline and associated equipment and facilities shall be designed and constructed in accordance with these requirements and the requirements of Transco. The Contractor is encouraged to define to Tenaska any deviations from these specifications which, in the opinion of the Contractor, would improve the quality, appearance or performance of the facility. The deviations from these documents require written approval by Tenaska. It is the Contractor's responsibility that equipment and materials furnished and the design and construction work is in conformance with all applicable codes, regulations and standards.
Sample 1
Technical Requirements and Specifications. (a) At its own expense, Permittee must erect, install, repair and maintain its Wireless Installations in safe condition and good repair in accordance with:
Sample 1
AutoNDA by SimpleDocs
Technical Requirements and Specifications. 36. Designated STAGE technical team or designated representative must be present at all times during USER’s occupancy of the Theatre.
Sample 1
Technical Requirements and Specifications 
Sample 1

Related to Technical Requirements and Specifications

  • Technical Requirements 2.7.4.1 The NID shall provide an accessible point of interconnection and shall maintain a connection to ground.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Plans and Specifications Tenant shall be solely responsible for the preparation of the final architectural, electrical and mechanical construction drawings, plans and specifications (called “plans”) necessary for Tenant to construct the Premises for Tenant’s occupancy, which plans shall be subject to approval by Landlord’s architect and engineers and shall comply with their reasonable requirements to avoid aesthetic or other conflicts with the design and function of the balance of the Building. Landlord’s approval is solely given for the benefit of Landlord, and neither Tenant nor any third party shall have the right to rely upon Landlord’s approval of Tenant’s plans for any purpose whatsoever other than that Landlord does not object thereto under this Lease. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan submission by Tenant within 8 business days after Landlord’s receipt thereof. If Landlord fails to respond to any such submission within such 8 business day period, which failure continues for more than 2 business days after Tenant gives Landlord a written notice (the “Deemed Approved Notice”) advising Landlord that such plan submission shall be deemed approved within 2 business days of Landlord’s receipt of the Deemed Approved Notice, then such plan submission shall be deemed approved hereunder. The Deemed Approved Notice shall, in order to be effective, contain on the first page thereof, in a font at least twice as large as the font of any other text contained in such notice, a legend substantially as follows: “FAILURE TO RESPOND TO THIS NOTICE WITHIN TWO (2) BUSINESS DAYS AFTER RECEIPT HEREOF SHALL CONSTITUTE LANDLORD’S APPROVAL OF SUBMITTED PLANS.” In the event Landlord’s architect’s or engineers’ approval of Tenant’s plans is withheld or conditioned, Landlord shall send prompt written notification thereof to Tenant and include a reasonably detailed statement identifying the reasons for such refusal or condition, and Tenant shall promptly have the plans revised by its architect to incorporate all reasonable objections and conditions presented by Landlord and shall resubmit such plans to Landlord. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan re-submission by Tenant within 8 business days after Landlord’s receipt thereof. Such process shall be followed until the plans shall have been approved by Landlord’s architect and engineers without unreasonable objection or condition. Without limiting the foregoing, Tenant shall be responsible for all elements of the design of Tenant’s plans (including, without limitation, compliance with law, functionality of design, the structural integrity of the design, the configuration of the Premises and the placement of Tenant’s furniture, appliances and equipment), and Landlord’s approval of Tenant’s plans shall in no event relieve Tenant of the responsibility for such design. Tenant agrees it shall be solely responsible for the timely preparation and submission of all such plans and for all elements of the design of such plans and for all costs related thereto. (The word “architect” as used in this Section 3.2 shall include an interior designer or space planner.) Tenant shall reimburse Landlord Landlord’s reasonable out-of-pocket expense incurred in connection with the review of Tenant’s plans.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • APPROVAL OF PLANS AND SPECIFICATIONS The Plans and Specifications will conform to the requirements and conditions set out by applicable law or any effective restrictive covenant, and to all governmental authorities which exercise jurisdiction over the Leased Premises or the construction thereon.

  • Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.

  • Functional Requirements Applications must implement controls that protect against known vulnerabilities and threats, including Open Web Application Security Project (OWASP) Top 10 Risks and denial of service (DDOS) attacks.

  • General Requirements The Contractor hereby agrees:

  • Construction Requirements a) All Life and Safety and applicable Building Codes will be strictly enforced (i.e., tempered glass, fire dampers, exit signs, smoke detectors, alarms, etc.). Prior coordination with the Building Manager is required.

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Packaging process shall be deemed a Specification change. No change in the Specifications shall be implemented by PCI, whether requested by Client, requested by PCI or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Pricing). PCI shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, PCI shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. PCI reserves the right to postpone effecting changes to the Specifications, or in the case of changes requested or required by any Regulatory Authority postpone Packaging under this Agreement, until such time as the parties agree to and execute the required written amendment.

Time is Money Join Law Insider Premium to draft better contracts faster.