Use and Construction Sample Clauses

Use and Construction. 5.8.1 The Approved Project's respective existing uses is lawful use permitted under: (a) Applicable Laws, regulations, orders or official directions; and (b) the relevant Government Lease and deeds of mutual covenants, and that permission is not temporary or personal. 5.8.2 Any permits, licences, waivers, consents or other authorisations necessary for the Approved Project's existing use, and its original construction and any subsequent alteration, has been obtained and is in force, unimpeachable and unconditional or subject only to conditions that have been satisfied in full and none are given on a temporary basis. 5.8.3 There are no unauthorised or illegal structures or alterations or works or building works on, in, at or appertaining to the Approved Project or any part thereof and there is no illegal change of use of the Approved Project.
AutoNDA by SimpleDocs
Use and Construction. 30.9.1 The Propertiesexisting use is the lawful use permitted under: (a) applicable town and country planning legislation; and (b) the terms of the lease, tenancy or licence, as varied by any supplemental deed or document, and in neither case is that permission temporary or personal. 30.9.2 Any permission necessary for any of the Properties’ existing use, its original construction and any subsequent alteration and development has been obtained and is in force. 30.9.3 There is no outstanding order, notice or other requirement of any local or other authority that affects the Properties’ existing use or involves expenditure by the Company in complying with it nor any circumstances known which may result in any such order or notice being made or served.
Use and Construction. 8.6.1 The Property's existing use as stated in schedule 5 is the lawful use permitted under: (a) applicable laws, regulations, orders or official directions; (a) the relevant government leases (or government conditions) and deeds of mutual covenants; and (b) in the case of the Other Property, the terms of the relevant lease, tenancy or licence, as varied by any supplemental deed or document and in neither case is that permission temporary or personal. 8.6.2 Any permission necessary for the Property's existing use, is in force.
Use and Construction. Section 8.1 Use and Management of Demised Premises (a) Subject to section 5.5, the Tenant shall develop, use, manage and operate the Demised Premises solely, continuously and actively after the Commencement Date only for the Contemplated Use, in accordance with the requirements of the Contribution Agreement, Project Agreement, the Heritage Agreement and this Lease, including the Residential Tenancies Protocol. The Tenant shall not use or permit the use of the Demised Premises or any part thereof for any other business or purpose except as may be permitted under the Contribution Agreement, the Project Agreement, the Heritage Agreement and this Lease or as otherwise consented to by the Landlord, acting reasonably. (b) The Tenant shall be permitted to lease, sublease or licence Residential Units in the Building and permit occupancy of the Building only in accordance with the terms of this Lease and the Contribution Agreement. (c) The Tenant shall protect all public works services and/or utilities and all easements and right-of-way in favour of the Landlord on above, under or affecting the Demised Premises. Notwithstanding the foregoing, the Tenant shall not be in default of its obligations under this Section 8.1 to the extent that it has ceased to operate in connection with any circumstance or delay contemplated by Section 15.11 hereof or any event of Force Majeure (as such term is defined in the Contribution Agreement); in connection with any repair or restoration work after damage or destruction; or any alteration, remodelling, renovation or expropriation or pursuant to any permitted Transfer of this Lease.
Use and Construction 

Related to Use and Construction

  • Definitions and Construction 1 1.1 Definitions.....................................................................................1 1.2

  • Design and Construction In complying with the requirements of the specification both with respect to arrangement and detail, design is to conform to the best current engineering practice. Each of the several parts of the material is to be of the maker’s standard design provided that this design is in general accordance with the specification. The essence of design should be simplicity and reliability in order to give long continuous service with high economy and low maintenance cost. Particular attention should be paid to internal and external access in order to facilitate inspection, cleaning and maintenance. The design dimensions and materials of all parts are to be such that they will not suffer damage as a result of stresses under the most severe conditions. Fully detailed specifications of the several parts of the material are to be submitted describing particularly the materials to be used. The materials used in the construction of the material are to be of the highest quality and selected particularly to meet the duties required of them. Mechanisms are to be constructed to avoid sticking due to rust or corrosion. Workmanship and general finish are to be of the highest class throughout. All similar parts of the material are to be interchangeable. All equipment is to operate without undue vibration and with the least possible amount of noise and is not to cause a nuisance. All equipment is to be designed to minimize the risk of fire and any damage, which may be caused in the event of fire. The equipment is also to be designed to prevent ingress of all vermin, accidental contact with live parts and to minimize the ingress of dust and dirt. The use of materials, which may be liable to attack by termites or other insects, is to be avoided.

  • Interpretation and Construction When a reference is made in this Agreement to a Section, such reference shall be to a Section of this Agreement, unless otherwise indicated. The headings contained in this Agreement are for reference purposes only and shall not affect in any way the meaning or interpretation of this Agreement. Whenever the words “include,” “includes” and “including” are used in this Agreement, they shall be deemed to be followed by the words “without limitation.” The words “hereof, “herein” and “hereunder” and words of similar import when used in this Agreement shall refer to this Agreement as a whole and not to any particular provision of this Agreement. The word “will” shall be construed to have the same meaning as the word “shall.” The words “dates hereof” will refer to the date of this Agreement. The word “or” is not exclusive. The definitions contained in this Agreement are applicable to the singular as well as the plural forms of such terms. Any agreement, instrument, law, rule or statute defined or referred to herein means, unless otherwise indicated, such agreement, instrument, law, rule or statute as from time to time amended, modified or supplemented. Each of the parties hereto acknowledges that it has been represented by counsel of its choice throughout all negotiations that have preceded the execution of this Agreement, and that it has executed the same with the advice of said independent counsel. Each party cooperated and participated in the drafting and preparation of this Agreement and the documents referred to herein, and any and all drafts relating thereto exchanged among the parties shall be deemed the work product of all of the parties and may not be construed against any party by reason of its drafting or preparation. Accordingly, any rule of law or any legal decision that would require interpretation of any ambiguities in this Agreement against any party that drafted or prepared it is of no application and is hereby expressly waived by each of the parties hereto, and any controversy over interpretations of this Agreement shall be decided without regards to events of drafting or preparation.

  • New Construction If this contract is for a Property that is newly constructed and the new construction option is selected, coverage begins on day one (1) of month thirteen

  • General Construction 20.2.1. Binding Nature.............................................. 20.2.2. Entire Agreement............................................ 20.2.3. Governing Law............................................... 20.2.4. Indulgences Not Waivers..................................... 20.2.5. Titles Not to Affect Interpretation......................... 20.2.6.

  • Law; Construction This Agreement and any claim, counterclaim or dispute of any kind or nature whatsoever arising out of or in any way relating to this Agreement (“Claim”), directly or indirectly, shall be governed by, and construed in accordance with, the internal laws of the State of New York.

  • ICIF Construction The ICIF shall be designed and constructed in accordance with Good Utility Practice. Within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Parties agree on another mutually acceptable deadline, Interconnection Customer shall deliver to Transmission Provider and Transmission Owner “as-built” drawings, information and documents for the ICIF, such as: a one-line diagram, a site plan showing the Generating Facility and the ICIF, plan and elevation drawings showing the layout of the ICIF, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Interconnection Customer’s step-up transformers, the facilities connecting the Generating Facility to the step-up transformers and the ICIF, and the impedances (determined by factory tests) for the associated step-up transformers and the Generating Facility. Interconnection Customer shall provide Transmission Provider and Transmission Owner with Interconnection Customer’s specifications for the excitation system, automatic voltage regulator, Generating Facility control and protection settings, transformer tap settings, and communications, if applicable.

  • Headings and Construction The headings of sections in this Agreement are for convenience of reference only and are not intended to qualify the meaning of any section. Any reference to a section number shall refer to a section of this Agreement, unless otherwise stated.

  • Severability and Construction Nothing in this Agreement is intended to require or shall be construed as requiring the Company to do or fail to do any act in violation of applicable law. The Company’s inability, pursuant to a court order, to perform its obligations under this Agreement shall not constitute a breach of this Agreement. In addition, if any portion of this Agreement shall be held by a court of competent jurisdiction to be invalid, void, or otherwise unenforceable, the remaining provisions shall remain enforceable to the fullest extent permitted by applicable law. The parties hereto acknowledge that they each have opportunities to have their respective counsels review this Agreement. Accordingly, this Agreement shall be deemed to be the product of both of the parties hereto, and no ambiguity shall be construed in favor of or against either of the parties hereto.

  • DAF Construction The DAF shall be designed and constructed in accordance with Good Utility Practice. Within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Developer and Connecting Transmission Owner agree on another mutually acceptable deadline, the Developer shall deliver to the Connecting Transmission Owner and NYISO “as- built” drawings, information and documents for the DAF, such as: a one-line diagram, a site plan showing the Large Generating Facility and the DAF, plan and elevation drawings showing the layout of the DAF, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Developer’s step-up transformers, the facilities connecting the Large Generating Facility to the step-up transformers and the DAF, and the impedances (determined by factory tests) for the associated step-up transformers and the Large Generating Facility. The Developer shall provide to, and coordinate with, Connecting Transmission Owner and NYISO with respect to proposed specifications for the excitation system, automatic voltage regulator, Large Generating Facility control and protection settings, transformer tap settings, and communications, if applicable.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!