Utility Mapping Sample Clauses

Utility Mapping. The Company shall make available all technical data relative to the water distribution and sanitary sewer collection systems. The Owner will assume the day to day acquisition and inputting of new record drawings and system data.
Sample 1
AutoNDA by SimpleDocs
Utility Mapping. As a part of the Xxxx Xxxxxx team, CSW will use the information obtained from the utility companies and field reviews to map the existing utilities over a topographic survey to reflect the existing conditions.
Sample 1
Utility Mapping. Xxxx Xxxxxx will send proposed project plans/limits map to utility owners with a County approved letter requesting verification of the location, size, and depth of each facility within the Project area. Xxxx Xxxxxx will map and identify all public or private utilities that may be affected by the Project and identify utilities requiring relocation. Task 2 Deliverables:  Survey Request Exhibit (pdf)  30% Plans (pdf)  30% Estimate (pdf)  Draft and Final Traffic Analysis Memo (pdf)  Draft and Final Geotechnical Design/Materials Report (pdf)  Draft and Final Drainage Memo (pdf)  Basis of Design Memo (pdf)  Utility “A” Letters (pdf)  Existing Utility Base Mapping (Civil 3D)
Sample 1
Utility Mapping. Consultant will contact utility providers in the area to request updated information regarding their facilities in the project area. Information received will be incorporated into the base mapping and used to identify high risk and low risk utilities and other information for the ROW Data Sheet. Potholing and assisting with the preparation of Utility Policy Variance Requests will not be performed with this task.
Sample 1
Utility Mapping. Continue to assist PCCA with Specific Project Strategies, Technologies, and Techniques that PCCA has chosen to implement.
Sample 1
Utility Mapping. The Design Professional will develop a Base Map of the existing utilities using as-built records, franchise utility mapping and field pothole and GRP scanning data collected. The utility base map will be referenced into the design drawings.
Sample 1
Utility Mapping. Consultant will perform research at the City and State, and utility companies and other agencies to obtain as‐builts and record maps of the project limits. This includes preparation and mailing of the Utility “A” letter upon City approval. The Consultant will obtain utility mapping from utility companies and develop a utility base map. A Utility Matrix will be created to track discussions and data received from utility agencies.
Sample 1
AutoNDA by SimpleDocs

Related to Utility Mapping

  • MAINTENANCE OF THE SAID BUILDING / APARTMENT / PROJECT The Promoter shall be responsible to provide and maintain essential services in the Project till the taking over of the maintenance of the project by the association of the allottees. The cost of such maintenance has been included in the Total Price of the [Apartment/Plot].

  • Utility Any service provided by an outside source or manufactured in-house that facilitates building operations (e.g., gas, water, electricity, fire suppression water, fire alarm systems).

  • Utility Services Company agrees to pay the full cost and expense associated with its use of all utilities, including but not limited to water, sanitary sewer, electric, storm drainage, and telecommunication services.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins. (2) Maintain waterbars, drainage dips, and other water diversion measures. (3) During active use, patrol and maintain functional drainage. (4) Repair damaged culvert ends.

  • Utilities The Landlord shall provide the following utilities and services to the Tenant: _

  • Utility Service To the extent commercially reasonable and practicable, the Sellers and Purchaser shall obtain xxxxxxxx and meter readings as of the Business Day preceding the Closing Date to aid in the proration of charges for gas, electricity and other utility services which are not the direct responsibility of Tenants. If such xxxxxxxx or meter readings as of the Business Day preceding the Closing Date are obtained, adjustments for any costs, expenses, charges or fees shown thereon shall be made in accordance with such xxxxxxxx or meter readings. If such xxxxxxxx or meter readings as of the Business Day preceding the Closing Date are not available for a utility service, the charges therefor shall be adjusted at the Closing on the basis of the per diem charges for the most recent prior period for which bills were issued and shall be further adjusted at the Final Closing Adjustment on the basis of the actual bills for the period in which the Closing takes place. Each Property’s Seller shall receive a credit at Closing for the Utility Deposits, if any, that are transferred or made available to Purchaser and that are held by applicable utility companies for the account of such Seller in respect of services provided to such Seller’s Property or Properties. Purchaser shall arrange for placing all utility services and bills in its own name as of the Closing Date.

  • Utility Charges Tenant shall pay or cause to be paid all charges for electricity, power, gas, oil, water and other utilities used in connection with the Leased Property.

  • Utility Additions Lessor reserves the right to install new or additional utility facilities throughout the Office Building Project for the benefit of Lessor or Lessee, or any other lessee of the Office Building Project, including, but not by way of limitation, such utilities as plumbing, electrical systems, communication systems, and fire protection and detection systems, so long as such installations do not unreasonably interfere with Lessee's use of the Premises.

  • Electrical connections Equipment requiring electrical connections for operation shall either be hard wired to the Authorized User's provided connections or the Contractor shall be responsible for a male electrical union. All connections shall be made by the Contractor and accomplished in accordance with National Electrical Code requirements. Electrically operated equipment shall be available in the following volts and phases: 208 volt 1 or 3 phase, 60 HZ 220 volt 1 or 3 phase, 60 HZ 440 volt 1 or 3 phase, 60 HZ

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations (a) Subject to the provisions of Paragraphs 2.2 (Lessor’s warranty as to condition), 2.3 (Lessor’s warranty as to compliance with covenants, etc.), 7.2 (Lessor’s obligations to repair), 9 (damage and destruction), and 14 (condemnation), Lessee shall, at Lessee’s sole cost and expense and at all times, keep the Premises and every part thereof in good order, condition and repair, structural and non-structural (whether or not such portion of the Premises requiring repair, or the means of repairing the same, are reasonably or readily accessible to Lessee, and whether or not the need for such repairs occurs as a result of Lessee’s use, any prior use, the elements or the age of such portion of the Premises), including, without limiting the generality of the foregoing all equipment or facilities serving the Premises, such as plumbing, heating, air conditioning, ventilating, electrical, lighting facilities, boilers, fired or unfired pressure vessels, fire sprinkler and/or standpipe and hose or other automatic fire extinguishing system, including fire alarm and/or smoke detection systems and equipment, fire hydrants, fixtures, walls (interior and exterior), foundations, ceilings, roofs, floors, windows, doors, plate glass, skylights, landscaping, driveways, parking lots, fences, retaining walls, signs, sidewalks and parkways located in, on, about, or adjacent to the Premises. Lessee shall not cause or permit any Hazardous Substance to be spilled or released in, on, under or about the Premises (including through the plumbing or sanitary sewer system) and shall promptly, at Lessee’s expense, take all investigatory and/ore remedial action reasonably recommended, whether or not formally ordered or required, for the cleanup of any contamination of, and for the maintenance, security and/or monitoring of, the Premises, the elements surrounding same, or neighboring properties that was caused or materially contributed to by Lessee, or pertaining to or involving any Hazardous Substance and/or storage tank brought onto the premises by or for lessee or under its control. Lessee, in keeping the Premises in good order, condition and repair, shall exercise and perform good maintenance practices. Lessee’s obligations shall include restorations, replacements or renewals when necessary to keep the Promises and all improvements thereon or a part thereof in good order, condition and state of repair. If Lessee occupies the Premises for seven (7) years or more, lessor may require Lessee to repaint the exterior of the buildings on the Premises as reasonably required, but not more frequently than once every seven (7) years. (b) Lessee shall, at Lessee’s sole cost and expense, procure and maintain contracts, with copies to Lessor, in customary form and substance for, and with contractors specializing and experienced in, the inspection, maintenance and service of the following equipment and improvements, if any, located on the Premises: (i) heating, air conditioning and ventilation equipment, (ii) boiler, fired or unfired pressure vessels, (iii) fire sprinkler and/or standpipe and hose or other automatic fire extinguishing systems, including fire alarm and/or smoke detection. (iv) landscaping and irrigation systems, (v) roof covering and drain maintenance and (vi) asphalt and parking lot maintenance.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!