Good Construction Practices definition

Good Construction Practices or “GCP” means the generally accepted practices, methods, skill, care, techniques and standards employed by the construction industry with respect to: (i) the procurement, construction, pre-commissioning, commissioning, testing and start-up of interstate natural gas pipelines and related facilities which include Applicable Codes and Standards, Applicable Law and the standards recommended by the suppliers and manufacturers of Equipment provided hereunder; (ii) personnel and plant safety and environmental protection; (iii) optimizing the scheduling of Work; and (iv) optimizing the reliability and availability of the Facility under the operating conditions reasonably expected at the Site, as specified in Attachment A. GCP are not intended to be limited to the optimum practices, methods, techniques or standards to the exclusion of all others, but rather to be a spectrum of reasonable and prudent practices, methods, techniques and standards employed by the construction industry in constructing natural gas pipelines and related facilities.
Sample 1Sample 2
Good Construction Practices means (i) those practices, methods, equipment, specifications and standards of safety and performance, as the same may change from time to time, as are commonly used by the firms performing engineering and/or construction services on facilities of the type and size of the Delta Project, which in the exercise of reasonable judgment and in light of the facts known at the time the decision was made, are considered good, safe and prudent practice in connection with the construction, installation and use of electrical and other equipment, facilities and improvements, with commensurate standards of safety, performance, dependability, efficiency and economy; and (ii) in compliance with all applicable Laws.
Sample 1Sample 2
Good Construction Practices means construction of the Works and practices which are carried out:
Sample 1Sample 2

Examples of Good Construction Practices in a sentence

  • The Delta Project is being constructed in accordance with Good Construction Practices and consistent with the requirements of the Delta Construction Budget and the Constellation PPA, in each case in all material respects.

  • The expert faculty made presentations on various subjects such as Planning & Design Aspects for Housing projects, Good Construction Practices and Quality Assurance in construction projects, Earthquake Resistant Design & Construction Practices.

  • The purpose of this programme was to introduce Emerging Technologies for construction of houses which may be useful for mass housing projects in the state and also to sensitize the engineers & architects at ULB & State level in the area of Good Construction Practices for housing projects.

  • The aim of the training is to equip knowledge and skills to Tribal Welfare Engineering Technical staff in Monitoring Information System developed by CGG, Tender procedures and contact Administration, Introducing Green Building Concepts in Construction of TW Ashram Schools, Alternate Construction Technologies in School Buildings and Good Construction Practices in Rural Road Formation in Tribal Areas.

  • Mitigation Proposed by the Applicant Any emission of fugitive dust requires implementation of Best Management and Good Construction Practices.

  • The purpose of this programme was to introduce Emerging Technologies for construction of houses to the State/UT officials which are useful for mass housing projects and also to sensitize the engineers & architects at ULB & State level in the area of Good Construction Practices for housing projects.

  • In the series of the Capacity Building Programmes on Good Construction Practices including Emerging Technologies for Housing, following more programmes were organized by BMTPC during the year: S.No.LocationDates1Jaipur, RajasthanOctober 8-9, 20152Bhubaneswar, OdishaDecember 18, 20153Gangtok, SikkimMarch 1-2, 2016 Around 60 to 65 participants from housing development agencies and State Governments participated in each programme.

  • Attached to this Advice Letter is PG&E’s estimated incremental marketing and administrative expenses through the end of 2025.30 PG&E has set its administration and marketing rate to amortize those costs over a period of 10 years.


More Definitions of Good Construction Practices

Good Construction Practices means those methods, techniques, standards and practices which, at the time they are to be employed and in light of the circumstances known or reasonably believed to exist at such time, are generally recognized and accepted as good equipping, installation, construction, commissioning and testing practices for the construction and improvement of capital assets in the construction industry as followed in the southwestern region of the United States and as reasonably inferable from the Contract Documents.
Sample 1
Good Construction Practices means any of the practices, methods and activities adopted by experienced and qualified procurement and construction contractors, suppliers and service providers providing construction services and the supply of products, goods, materials and equipment to the North American water utility industry as good practices applicable to the procurement and construction of facilities or structures of similar design to the Physical Facilities, or any of the practices, methods or activities which, in the exercise of skill, diligence, prudence, foresight and reasonable judgment by a prudent Person who provides such in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices and applicable law, and, for greater certainty, includes Good Project Management Practices.
Sample 1
Good Construction Practices means those methods, techniques, standards and practices which, at the time they are to be employed and in light of the circumstances known or reasonably believed to exist at such time, are generally recognized and accepted as good equipping, installation, construction, commissioning and testing practices for the construction and improvement of capital assets in the construction industry as followed in the southwestern region of the United States.
Sample 1

Related to Good Construction Practices

  • Restorative practices means practices that emphasize repairing the harm to the victim and the school community caused by a student's misconduct.

  • Proper practices means those set out in The Practitioners’ Guide

  • collusive practices means a scheme or arrangement between two or more Bidders, with or without the knowledge of the Procuring Entity, designed to establish bid prices at artificial, non-competitive levels.

  • Group practice means a group of two or more health care providers legally organized as a partnership, professional corporation, or similar association:

  • coercive practices means harming or threatening to harm, directly or indirectly, persons, or their property to influence their participation in a procurement process, or affect the execution of a contract;

  • Good Practice means such practice in the processing of personal data as appears to the Commissioner to be desirable having regard to the interests of data subjects and others, and includes (but is not limited to) compliance with the requirements of this Act;

  • Active practice means post-licensure practice at the level of licensure for which an applicant is seeking licensure in Virginia and shall include at least 360 hours of practice in a 12-month period.

  • Best Practices means a term that is often used inter-changeably with “evidence-based 24 practice” and is best defined as an “umbrella” term for three levels of practice, measured in relation to 25 recovery-consistent mental health practices where the recovery process is supported with scientific 26 intervention that best meets the needs of the Client at this time. 27 a. EBP means Evidence-Based Practices and refers to the interventions utilized for which 28 there is consistent scientific evidence showing they improved Client outcomes and meets the following 29 criteria: it has been replicated in more than one geographic or practice setting with consistent results; it

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Fair Credit Reporting Act The Fair Credit Reporting Act of 1970, as amended.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Unfair trade practices means supply of services different from what is ordered on, or change in the Scope of Work;

  • Certification Practice Statement means a statement issued by a Certifying Authority to specify the practices that the Certifying Authority employs in issuing Digital Signature Certificates;

  • Best management practices (BMP) means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the United States. BMPs include treatment requirements, operation procedures, and practices to control plant site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.

  • Good Manufacturing Practices means current good manufacturing practices, as set forth in 21 C.F.R. Parts 210 and 211.

  • Pipeline Construction means a substantial disturbance to agricultural land associated with installation, replacement, removal, operation or maintenance of a pipeline, but shall not include work performed during an emergency. Emergency means a condition where there is clear and immediate danger to life or health, or essential services, or a potentially significant loss of property. When the emergency condition ends, pipeline construction will be in accordance with these rules.

  • Existing construction means any structure for which the "start of construction" commenced before the effective date of the initial floodplain management code or ordinance adopted by the community as a basis for that community's participation in the NFIP.

  • Unsafe or unsound practice means a practice or conduct by a person licensed to engage in money transmission or an authorized delegate of such a person, which creates the likelihood of material loss, insolvency, or dissipation of the licensee’s assets, or otherwise materially prejudices the interests of its customers.

  • Unfair practice means (i) establishing contact with any person connected with or employed or engaged by the Authority with the objective of canvassing, lobbying or in any manner influencing or attempting to influence the Bidding Process; or (ii) having a Conflict of Interest; and

  • Employment Practices means any wrongful or unfair dismissal, denial of natural justice, defamation, misleading representation or advertising, unfair contracts, harassment or discrimination (sexual or otherwise) in respect of employment by the Insured.

  • fradulent practice means a misrepresentation or omission of facts in order to influence a procurement process or the execution of contract;

  • Collaborative practice means that a physician may delegate aspects of drug therapy management for the physician’s patients to an authorized pharmacist through a community practice protocol. “Collaborative practice” also means that a P&T committee may authorize hospital pharmacists to perform drug therapy management for inpatients and hospital clinic patients through a hospital practice protocol.

  • Best Management Practices (BMPs means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the state. BMPs also include treatment requirements, operating procedures, and practices to control site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.

  • Commenced Construction means (a) all of the following site preparation work is completed: ingress and egress routes exist; the site on which the Project will be located is cleared and graded; there is power service to the site; footings are prepared; and foundations have been poured consistent with purchased equipment specifications and project design; or (b) the following financial commitments have been made: (i) (A) an engineering, procurement, and construction contract (“EPC”) has been executed by all parties and is effective; or (B) contracts (collectively, “EPC Equivalents”) for all of the following have been executed by all parties and is effective: (1) project engineering, (2) procurement of all major equipment, and (3) construction of the Project, and (ii) the cumulative payments made by the Developer under the EPC or EPC Equivalents to the counterparties to those respective agreements is equal to at least thirty (30) percent of the total costs of the EPC or EPC Equivalents.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Privilege to practice means: an individual's authority to deliver emergency medical services in remote states as authorized under this compact.