Maximum Vehicle Turnaround Time definition

Maximum Vehicle Turnaround Time means an average weekly turnaround time of twenty (20) minutes for vehicles Delivering Acceptable Materials to the Approved Facilities, where the turnaround time for each vehicle is measured from the vehicle’s arrival time, which shall be recorded at the motor vehicle scale when the inbound weight of the vehicle is recorded at the Approved Facility property, until the vehicle’s departure time, when it exits that Approved Facility. This excludes driver personal time and mechanical problems of the Franchised Collector.
Sample 1
Maximum Vehicle Turnaround Time means a monthly average of 30 minutes or less, measured from the time a vehicle enters either the Organic Materials Processing Facility property and until it exits the Organic Materials Processing Facility property, including but not limited to gross and net weights, tipping and transportation throughout the facility.
Sample 1Sample 2
Maximum Vehicle Turnaround Time means a forty-five- (45-) minute Turnaround Time. Member (Member Agency) means any one of the public entities listed in Exhibit A (Equity Members) or Exhibit B (non-Equity Members) of the Joint Exercise of Powers Agreement South Bayside Waste Management Authority, as those exhibits may be changed from time to time. As of the Effective Date, Member Agencies include the public entities listed in Exhibit B hereto. Non-Allowable Costs include the following:
Sample 1

Examples of Maximum Vehicle Turnaround Time in a sentence

  • Contractor may use the adjusted vehicle Turnaround 486 Time to determine compliance with the Maximum Vehicle Turnaround Time for that individual 487 event, and may use the adjusted vehicle Turnaround Time when calculating the actual average 488 monthly vehicle Turnaround Time, provided that such adjustments are supported with evidence 489 to the satisfaction of Authority.

  • The Authority shall provide Notice of its intent to assess 521 liquidated damages to the Contractor within ten (10) Days of the Authority becoming aware of 522 the Contractor’s failure to meet the Maximum Vehicle Turnaround Time and/or Maximum 523 Average Monthly Vehicle Turnaround Time.

  • The liquidated damages payment shall be paid in accordance with Section 8.20 and shall 497 be equal to a base amount of $100.00 in Rate Period One (2020) for each Transfer Company 498 vehicle with a Turnaround Time greater than the Maximum Vehicle Turnaround Time plus $1.00 499 in Rate Period One (2020) for every minute in excess of the Maximum Vehicle Turnaround Time.

  • If the average vehicle turnaround time for the week in 1812 question is in excess of the maximum average vehicle turnaround time, the Recyclables Contractor 1813 shall pay the Contractor five dollars ($5.00) per Load for each minute in excess of the twenty (20) 1814 minute average guaranteed, where the number of Loads shall be equal to the number of Loads 1815 received during the week in which the Maximum Vehicle Turnaround Time was exceeded.

  • During any period in which the Contractor is unable to document the actual 544 Turnaround Time of each load of Authority’s Solid Waste delivered by the Transfer Company using 545 a Contractor-provided vehicle tracking system, the Maximum Vehicle Turnaround Time shall be 546 thirty-five (35) minutes rather than forty-five (45) minutes stated in Exhibit A.

  • The City may approve the Franchised Collector’s use GPS (global positioning system) records for Collection vehicles to calculate turnaround time, or the City may conduct on-site surveys of performance to verify compliance with the Maximum Vehicle Turnaround Time.

  • Contractor guarantees (the "Maximum Vehicle Turnaround Guarantee") that each of the Franchised Collector’s vehicles Delivering material is able to conduct its Delivery of such materials within the Maximum Vehicle Turnaround Time specified in Article 1, absent vehicle breakdown or driver negligence.

  • If the average vehicle turnaround time for the week in 1935 question is in excess of the maximum average vehicle turnaround time, the Recyclables Contractor 1936 shall pay the Contractor five dollars ($5.00) per Load for each minute in excess of the twenty (20) 1937 minute average guaranteed, where the number of Loads shall be equal to the number of Loads 1938 received during the week in which the Maximum Vehicle Turnaround Time was exceeded.

  • The CCCSWA may approve the Franchised Collector’s use GPS 1082 (global positioning system) records for Collection vehicles to calculate turnaround time, or the CCCSSA may 1083 conduct on‐site surveys of performance to verify compliance with the Maximum Vehicle Turnaround Time.

  • If Contractor fails to meet the Maximum Vehicle Turnaround Time, the City may assess Liquidated Damages in accordance with 11.9.


More Definitions of Maximum Vehicle Turnaround Time

Maximum Vehicle Turnaround Time means an average weekly turnaround time of twenty (20) minutes for 294 vehicles Delivering Recyclable Materials to the Approved Trans‐Load Facility, where the turnaround time for each 295 vehicle is measured from the vehicle’s arrival time, which shall be recorded at the motor vehicle scale when the 296 inbound weight of the vehicle is recorded at the Approved Trans‐Load Facility property, until the vehicle’s 297 departure time, when it exits that Approved Trans‐Load Facility. This excludes driver personal time and 298 mechanical problems of the Franchised Collector.
Sample 1
Maximum Vehicle Turnaround Time means a monthly average of 30 minutes, measured from the time a vehicle enters either the Composting Facility property and until it exits the Composting Facility property, including but not limited to gross and net weights, tipping and transportation throughout the facility. Member (Member Agency) means any one of the public entities of the Joint Exercise of Powers Agreement South Bayside Waste Management Authority. Monthly Report is described in Article IV, Section 10 and Exhibit D, Monthly Reporting. Notice means a notice given in accordance with Article IX, Section 3. Organic Materials means residential and commercial Plant Materials, Food Waste or a mix these two items. Ownership has the meaning provided under the constructive ownership provisions of Section 318(a) of the Internal Revenue Code of 1986 except that (1) 10 percent is substituted for 50 percent in Section 318(a)(2)(C) and in Section 318(a)(3)(C) thereof; (2) Section 318(a)(5)(C) is disregarded; (3) ownership interest of less than 10 percent is disregarded; and (4) percentage interests is determined on the basis of the percentage of voting interest or value which the ownership interest represents, whichever is greater. Party or Parties refers to the SBWMA and Contractor, individually or together. Permits means all federal, State, SBWMA, other local and any other governmental unit permits, orders, licenses, approvals, authorizations, consents and entitlements that are required under Applicable Law to be obtained or maintained by any Person with respect to Services, as renewed or amended from time to time. Person(s) includes an individual, firm, association, organization, partnership, corporation, trust, joint venture, the United States, the State, local governments and municipalities and special purpose districts and other entities. Plant Materials means a subset of organic Recyclable Materials consisting of grass cuttings, weeds, leaves, pruning, branches, dead plants, brush tree trimmings, dead trees (on average not more than twelve (12) inches in diameter) and four (4) feet in length, and similar materials generated at Premises within Agency, separated and set out for Collection, processing, and Recycling. Plant Materials does not include materials not normally produced from farms, gardens or landscapes, such as, but not limited to, brick, rock, gravel, large quantities of dirt, concrete, sod, non-organic wastes, oil, and painted or treated wood or wood products. Processing Rate means the...
Sample 1

Related to Maximum Vehicle Turnaround Time

  • Micro-purchase threshold means the dollar amount at or below which a district may purchase property or services using micro-pur- chase procedures. Generally, the micro-purchase threshold for pro- curement activities administered under federal awards is not to ex- ceed the amount set by the Federal Acquisition Regulations (FAR) at 48 C.F.R. Part 2, Subpart 2.1 [see below], unless a higher threshold is requested by the district and approved by the cogni- zant agency for indirect costs.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Toll Billing Exception Service (TBE means a service that allows End Users to restrict third number billing or collect calls to their lines.

  • Lowest Achievable Emission Rate (LAER means, for any source, the more stringent rate of emissions based on the following:

  • City-based manufacturer means a person who: (i) holds any appropriate city license; (ii) is subject to applicable city taxes; and (iii) owns, operates, or leases a manufacturing facility within the city.

  • Self-service storage facility or "facility" means any real property designed or used for the purpose of renting or leasing individual storage space to tenants who are to have access to that space for the purpose of storing and removing personal property.

  • AHYDO Catch-Up Payment means any payment, including payments made on subordinated debt obligations, in each case to the extent such payment is necessary to avoid the application of Section 163(e)(5) of the Code.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Base Day-ahead Scheduling Reserves Requirement means the thirty-minute reserve requirement for the PJM Region established consistent with the Applicable Standards, plus any additional thirty-minute reserves scheduled in response to an RTO-wide Hot or Cold Weather Alert or other reasons for conservative operations. Base Load Generation Resource

  • Day-ahead System Energy Price means the System Energy Price resulting from the Day- ahead Energy Market.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Incremental Rights-Eligible Required Transmission Enhancements means Regional Facilities and Necessary Lower Voltage Facilities or Lower Voltage Facilities (as defined in Tariff, Schedule 12) and meet one of the following criteria: (1) cost responsibility is assigned to non-contiguous Zones that are not directly electrically connected; or (2) cost responsibility is assigned to Merchant Transmission Providers that are Responsible Customers.

  • Stand Alone System Upgrade Facilities means System Upgrade Facilities that a Developer may construct without affecting day-to-day operations of the New York State Transmission System during their construction. NYISO, the Connecting Transmission Owner and the Developer must agree as to what constitutes Stand Alone System Upgrade Facilities and identify them in Appendix A to this Agreement.

  • Gross Vehicle Weight Rating (GVWR) means the maximum weight of the vehicle, as specified by the manufacturer. GVWR includes total vehicle weight plus fluids, passengers, and cargo.

  • Additional Day-ahead Scheduling Reserves Requirement means the portion of the Day- ahead Scheduling Reserves Requirement that is required in addition to the Base Day-ahead Scheduling Reserves Requirement to ensure adequate resources are procured to meet real-time load and operational needs, as specified in the PJM Manuals.

  • Day-ahead Congestion Price means the Congestion Price resulting from the Day-ahead Energy Market.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Net metering period means the 12-month period following the date of final interconnection of the

  • Additional Accelerated Purchase Share Volume Maximum means, with respect to an Additional Accelerated Purchase made pursuant to Section 2(c) hereof, a number of shares of Common Stock equal to (i) the number of Purchase Shares specified by the Company in the applicable Additional Accelerated Purchase Notice as the Additional Accelerated Purchase Share Amount to be purchased by the Investor in such Additional Accelerated Purchase, divided by (ii) the Additional Accelerated Purchase Share Percentage (to be appropriately adjusted for any reorganization, recapitalization, non-cash dividend, stock split, reverse stock split or other similar transaction).

  • Seasonal high water table means the highest zone of soil or rock that is seasonally or permanently saturated by a perched or shallow water table. A planar surface, below which all pores in rock or soil (whether primary or secondary) that is seasonally or permanently saturated.

  • Non-Participating Manufacturer means any Tobacco Product Manufacturer that is not a Participating Manufacturer.