Plumbing Systems definition

Plumbing Systems means all potable water supply and distribution pipes, all plumbing fixtures and traps, all drainage and vent pipes and all building drains, including their respective joints, connections, devices, receptacles, and appurtenances within the property lines of the premises and shall include potable water piping, a potable water treating or using equipment, fuel gas piping, water heaters and vents for the same.

Split View

AI-Powered Contracts

Draft, Review & Redline at the Speed of AI

Get StartedSchedule a Demo

Plumbing Systems. Complete plumbing system for domestic water service, sanitary sewer service, and roof drainage. Water and sanitary systems will be accessible to tenant areas for future connections for convenience sinks and other uses. HVAC: HVAC system is provided with rooftop units, total capacity approximately 460 tons, of approximately 350 sf per ton. Primary trunk ducts and exterior zone VAV boxes provided at approximately 1 per 1,100 SF. Exterior zone VAV boxes are provided with electric reheat. No distribution ducting or diffusers are included at these exterior zone boxes. Energy management system provided, with remote computer monitoring capability. Tenant metering capability also included in system. HVAC Design criteria for cooling load allowed include the following: 2 ▇▇▇▇▇ per SF for lighting;

Plumbing Systems means: Gas supply lines and fittings; Water supply, waste, and vent pipes and their fittings; Septic tanks and their drain fields; Water, gas, and sewer service piping and their extensions to the tie-in of a public utility connection; On-site ▇▇▇▇▇ and sewage disposal systems.

Examples of Plumbing Systems in a sentence

• This is a usage Contract between the County and Contractor to Perform Maintenance, Repair and Alterations for Plumbing Systems on an as needed basis, as set forth in Attachment A “Scope of Work”.

• This Contract specifies the contractual terms and conditions by which the County will procure and the Contractor will Perform Maintenance, Repairs and Alterations for Plumbing Systems from Contractor as further detailed in the Scope of Work, identified and incorporated herein by this reference as “Attachment A”.

• Services shall include, but are not limited to: Perform Maintenance, Repairs and Alterations for Plumbing Systems; Water Supply and Waste Removal County Wide.

• Necessary removal of asbestos found in Mechanical, Electrical, and Plumbing Systems and ventilation pipe joints provided it does not involve the removal of contributing historic elements.

• Accessories including but not limited to pressurisation fan and elevator pit ladders D20 Plumbing Systems Note: Restrooms and Janitors' Closets on each tenant floor will serve as sanitary waste and water supply connection points for tenants' TI plumbing work.

• Our focus areas include HVAC, Refrigeration, Plumbing Systems, Environmental Services, Filtration Products, Project Development, System Design, Commissioning, Energy Solutions/Performance Contracting and Preventive Maintenance in commercial markets.

• HVAC Abandoned Redundant Cooling Tower October 27, 2008 CTG MB Casino and Hotel Condition Assessment Report Mechanical, Fire Protection, Plumbing Systems 5.24 27 Tenant to correct deficiency in accord with cited reference.

• Preliminary Piping Design Routing drawings for the Process and Utility Piping and Aboveground Plumbing Systems will also be developed and prepared as a Basis for the Estimate.

• The home inspection is limited to a visual examination of three (3) or more of the following readily accessible systems and components, as indicated: Heating Systems Cooling Systems Electrical Systems Plumbing Systems Foundations Roof Coverings Exterior and Interior Components Structural Components Other ( ) The scope of the inspection is limited to the items listed above and within the report pages.

• This inspection and report is limited to a visual examination of the exposed and readily accessible areas of the building, that includes the following: Sitework, Structure/Foundation, Exterior, Chimneys, Carport, Garage, Roof, Plumbing Systems, Water Heaters, Electrical Systems, Heating Systems, Cooling Systems, Interior, Stairs, Laundry, Kitchen, Built-in Appliances, Bathrooms, Crawlspace/Attic, Insulation, and Fireplaces.

More Definitions of Plumbing Systems

Plumbing Systems. Complete plumbing system for domestic water service, sanitary sewer service, and roof drainage. Water and sanitary systems will be accessible to tenant areas for future connections for convenience sinks and other uses. HVAC: HVAC system is provided with rooftop units, total capacity approximately 460 tons, of approximately 350 sf per ton. Primary trunk ducts and exterior zone VAV boxes provided at approximately 1 per 1,100 SF. Exterior zone VAV boxes are provided with electric reheat. No distribution ducting or diffusers are included at these exterior zone boxes. Energy management system provided, with remote computer monitoring capability. Tenant metering capability also included in system. HVAC Design criteria for cooling load allowed include the following: 2 ▇▇▇▇▇ per SF for lighting; 1.5 ▇▇▇▇▇ per SF for office equipment 150 SF per person. Electrical Service: The building is provided with primary electrical service, 277/480 volts, 3 phase, with main disconnects in the main electrical room on the first floor. Electrical distribution panel rooms are provided two per floor adjacent to stairwells. Electrical service will provide total capacity of 27 ▇▇▇▇▇ per square foot, generally allocated as follows: 15 ▇▇▇▇▇ per SF for HVAC loads; 3 ▇▇▇▇▇ per SF for lighting; 6.5 ▇▇▇▇▇ per SF for tenant equipment loads; 2.5 ▇▇▇▇▇ per SF spare power; A pad area for a future generator to be included in the building shell. Fire Alarm: Fire alarm panel is provided, including fire alarm devices as required by code in core and common areas. Security: A card access system to be provided at the main entry doors of the building. Elevator card access also to be available based on tenant needs (but at Tenant's sole cost and expense).

Plumbing Systems. Complete plumbing system for domestic water service, sanitary sewer service, and roof drainage. Water and sanitary systems will be accessible to tenant areas for future connections for convenience sinks and other uses. HVAC: HVAC system is provided with rooftop units, total capacity approximately 460 tons, of approximately 350 sf per ton. Primary trunk ducts and exterior zone VAV boxes provided at approximately 1 per 1,100 SF. Exterior zone VAV boxes are provided with electric reheat. No distribution ducting or diffusers are included at these exterior zone boxes. Energy management system provided, with remote computer monitoring capability. Tenant metering capability also included in system. HVAC Design criteria for cooling load allowed include the following: 2 ▇▇▇▇▇ per SF for lighting; 1.5 ▇▇▇▇▇ per SF for office equipment 150 SF per person. Electrical Service: The building is provided with primary electrical service, 277/480 volts, 3 phase, with main disconnects in the main electrical room on the first floor. Electrical distribution panel rooms are provided two per floor adjacent to stairwells. Electrical service will provide total capacity of 27 ▇▇▇▇▇ per square foot, generally allocated as follows: 15 ▇▇▇▇▇ per SF for HVAC loads; 3 ▇▇▇▇▇ per SF for lighting; 6.5 ▇▇▇▇▇ per SF for tenant equipment loads; 2.5 ▇▇▇▇▇ per SF spare power; A pad area for a future generator to be included in the building shell. Fire Alarm: Fire alarm panel is provided, including fire alarm devices as required by code in core and common areas. Security: A card access system to be provided at the main entry doors of the building. Elevator card access also to be available based on tenant needs (but at Tenant's sole cost and expense). SCHEDULE 1 TO EXHIBIT B 2 EXHIBIT C COMMENCEMENT DATE MEMORANDUM With respect to that certain lease ("Lease") dated , , between , a ("Tenant"), and CATELLUS DEVELOPMENT CORPORATION, a Delaware corporation ("Landlord"), whereby Landlord leased to Tenant and Tenant leased from Landlord approximately rentable square feet of the building located at ("Premises"), Tenant hereby acknowledges and certifies to Landlord as follows:

Plumbing Systems refers to all pipes (supply and waste) and their fittings, including septic tanks and their pipe drain fields, as well as gas supply lines and vent pipes, most of which are not often included in the Manufacturer’s products.

Plumbing Systems public or private, means and includes: (a) plumbing fixtures, interconnecting system pipes and traps; (b) soil, waste and vent pipes; (c) building drains and building sewers; (d) sanitary and storm water drainage facilities; (e) liquid waste and sewerage facilities; (f) water supply systems and distribution and disposal pipes of any premises; (g) water treating and water using equipment attached to a plumbing system except for water conditioning equipment; and (h) all the respective connections, devices and appurtenances of any plumbing system, public or private, within or adjacent to any building, residence, manufactured housing, or structure to and including a connection with any point of a public or private supply, distribution or disposal system or other acceptable terminal. (See § 54-2604, Idaho Code.)