Standard Warranty Period definition

Standard Warranty Period is the period in which this BSH WARRANTY applies, and which differs depending upon the type of PRODUCT specified in clause 7 as read with Appendix 1 hereto.
Sample 1Sample 2Sample 3
Standard Warranty Period means twelve (12) months commencing on the date of shipment;
Sample 1Sample 2
Standard Warranty Period means 90 days from completion of installation by approved Mainstream technician, or for goods delivered, 90 days from arrival at customer’s premise
Sample 1Sample 2

Examples of Standard Warranty Period in a sentence

  • Standard Warranty Period: One year from date of Substantial Completion, unless otherwise indicated.

  • During the software Standard Warranty Period, Conviron will, at its sole option, make the software operate as warranted by making the necessary corrections, replacing the software with functionally equivalent software, or refunding the money paid by the Purchaser for the software upon return of all of copies of the software.

  • Conviron warrants that Argus hardware, if unaltered, will conform to its specifications during the Argus hardware Standard Warranty Period indicated in the Warranty Reference Table.

  • Conviron warrants that its software, if unaltered, will conform to specifications during the software Standard Warranty Period noted in the Warranty Reference Table.

  • EXTENDED WARRANTY The Standard Warranty Period and the Compressor Warranty Period are extended to a total of ten (10) years (the “Extended Warranty Period”) for qualified Systems that have been (a) installed by a party that has completed the Training Requirements, (b) installation is pursuant to LG’s published instructions, and (c) product is registered within 60 days of startup at www.lg-dfs.com or www.lg-dfs-warranty.com.

  • During the Argus hardware Standard Warranty Period, Conviron will, at its sole option, repair or replace defective parts with new or refurbished parts (labor by distributor).

  • During the Argus hardware Standard Warranty Period, Conviron will, at its sole option, repair or replace defective parts with new or refurbished parts without charge for labor or parts.

  • The SAR pay-out will be chargeable to Hong Kong salaries tax at progressive salaries tax rates of up to 17% or at a flat rate of 15%, whichever is lower, in the year of assessment in which you receive the SAR pay-out from your employer.Your employer will report to the IRD the SAR pay-out in its annual employer’s return.No salaries tax or mandatory provident fund contributions will be withheld.

  • BSM warrants to Customer, the original purchaser of Hardware Devices, that, during the Standard Warranty Period or the Extended Warranty Period, as applicable, the Hardware Devices will be free from material defects in materials and workmanship and operate in accordance with the Documentation.

  • Upon request and dependent upon product specification, Nanolumens may, in Nanolumens’ sole discretion, agree to extend the Standard Warranty Period for one-year periods up to a total of four (4) years for additional charges.


More Definitions of Standard Warranty Period

Standard Warranty Period means the one year period commencing on the date that a Hardware Device is shipped to the original customer and “Extended Warranty Period” means (a) if Customer has received a Hardware Device under a Managed Services Subscription, the Subscription Term; or (b) if Customer has purchased certain Subscription Plans which have an extended warranty in accordance with the applicable Documentation, the Subscription Term. BSM may announce additional Subscription Plans that are eligible for the Extended Warranty Period from time to time. The remaining warranty period for any Hardware Devices that BSM repairs or replaces under the Standard Warranty Period is deemed to be the greater of: (aa) the actual remaining Standard Warranty Period for the replaced or repaired Hardware Device; and (bb) 90 days following the completion of such repair or replacement. This Section 11.2 – Hardware Device Warranties is BSM’s sole liability and Customer’s sole remedy for any breach of warranty by BSM.
Sample 1Sample 2
Standard Warranty Period means the period of time elapsed since manufacture of the Goods, during which Hypermotive warrant the performance of those Goods against the expected performance in the Proposal.
Sample 1
Standard Warranty Period means the general warranty period linked in this Extended Warranty and as such available online on the official website of Feilo Sylvania on the day of first commercial purchase from a Feilo Sylvania affiliate.
Sample 1
Standard Warranty Period. Standard warranty periods apply per product specification as stated in Exhibit A attached hereto for all Display components and paks, including DIUs (the “Warranty Period”).
Sample 1
Standard Warranty Period is the period in which this BSH WARRANTY applies, and which differs depending upon the type of PRODUCT specified in clause 7 as read with Appendix 1 to 6 hereto. 1.2 In this BSH WARRANTY unless the context otherwise requires – 1.2.1 The singular shall import and include the plural and vice versa; 1.2.2 Words indicating natural persons shall import and include juristic persons; 1.2.3 Clause headings are for reference only and do not affect interpretation; 1.2.4 Where any number of days is prescribed in this BSH WARRANTY, they shall be calculated exclusive of the first day and inclusive of the last day unless the last day falls on a Saturday, Sunday or public holiday. On such day the last day shall be the next succeeding day which is not a Saturday, Sunday or public holiday; 1.2.5 The rule of construction that this BSH WARRANTY shall be interpreted against the party responsible for the drafting or preparation of this BSH WARRANTY shall not apply. The same applies to the schedules or annexures. 1.3 This BSH WARRANTY constitutes the whole agreement between BSH and the CUSTOMER as to the subject matter hereof and no agreements, representations or warranties between BSH and the CUSTOMER other than those set out herein are binding on BSH and the CUSTOMER. 1.4 No addition to or variation, consensual cancellation or novation of this BSH WARRANTY and no waiver of any right arising from this BSH WARRANTY or its breach or termination shall be of any force or effect unless reduced to writing and signed by BSH and the CUSTOMER or their duly authorised representatives. 1.5 This BSH WARRANTY shall be governed by the laws of the Republic of South Africa, and accordingly, any dispute concerning the validity, existence, interpretation, rectification, breach or termination or any dispute arising out of this agreement, their avoidance, interpretation, rectification, breach or termination, shall be determined according to the laws of the Republic of South Africa.
Sample 1
Standard Warranty Period begins on the Commencement Date and continues until the earlier to occur of twelve (12) months or 12,000 miles (of the vehicle in which the A/C Product is first and continuously installed), after which time this Limited Warranty terminates. The “Commencement Date” is, for a Direct Customer, the date of purchase of the A/C Product by the Direct Customer from Transtar or, for a Shop Customer, the date of installation of the A/C Product in the Shop Customer vehicle, as applicable, in each case as evidenced by a Customer invoice or work-order.
Sample 1

Related to Standard Warranty Period

  • Warranty Period /„Maintenance Period‟ shall mean the period during which the Contractor shall remain liable for repair or replacement of any defective part of the Works performed under the Contract.

  • Defects Liability Period (Warranty Period) means the period stated in the Schedule A Special Stipulations, following the taking over, during which the Contractor is responsible for making good defects and damage in accordance with Clause 15.

  • Improvement warranty period means a period:

  • Manufacturer’s Warranty means the warranty supplied from time to time by the manufacturer of the Goods as at the date of the acceptance of the Statement of Work; “PPSA” means the Personal Property Securities Xxx 0000; “Price” means the amount specified within each Statement of Work (subject to any Variation) or as otherwise specified from the Company to the Customer representing the cost for the Works; “Related Work” means any additional building, carpentry, painting, plastering, plumbing or other work or other trades that the Customer requires, which are not to be carried out by the Company; “Services” means the services provided by the Company to the Customer as part of the Works, which may include without limitation the installation of Goods; “Services Delay Charge” means the services delay charge (if any) set out in the Statement of Work; “Services Interruption Event” means any interruption to a Works caused by; a Force Majeure Event, the Customer’s failure to carry out or perform any obligation required of it under this agreement which in the sole opinion of the Company does or may cause a delay in the Works and any other matter which in the reasonable opinion of the Company will cause an interruption or delay in the performance of the Works; “Statement of Work” means the details outlining the provision of the Works, which statement can be delivered verbally or in writing (including email) and may include (where applicable) an estimate or quotation (as specifically expressed as the case) of costs; “Variation” means a change in the Statement of Work including the specifications, scope, time of supply, price or scale of the Works and such variation shall form part of this agreement; “Workmanship” means a good and high quality and standard of delivery in connection with the Services performed; “Works” means the supply of Goods and the provision of Services to the Customer as per each Statement of Work;

  • Product Warranty has the meaning set forth in Section 9.3.

  • Extended Warranty means an agreement for a specified duration to

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Service Specifications means the following documents, as applicable to the Services under Your order: (a) the Oracle Cloud Hosting and Delivery Policies, the Program Documentation, the Oracle service descriptions, and the Data Processing Agreement described in this Schedule C; (b) Oracle’s privacy policies; and (c) any other Oracle documents that are referenced in or incorporated into Your order. The following do not apply to any non-Cloud Oracle service offerings acquired in Your order, such as professional services: the Oracle Cloud Hosting and Delivery Policies, Program Documentation, and the Data Processing Agreement. The following do not apply to any Oracle Software: the Oracle Cloud Hosting and Delivery Policies, Oracle service descriptions, and the Data Processing Agreement.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Original equipment manufacturer means a company that manufactures products that it has designed from purchased components and sells those products under the company's brand name.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Class specification means a formal written statement of the class which defines the general character and scope of the duties and responsibilities of positions in the class, lists typical or illustrative examples of work of positions in the class, enumerates the knowledges, skills, and abilities required for successful performance of the work and states required minimum experience and training for positions in the class.

  • Engine Manufacturer means CFM International, Inc.

  • IS Specification means the Specification of latest edition with amendments, if any, up to time of receipt of tender by Corporation issued by the Bureau of Indian Standards as referred to in the specifications and / or work orders.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • The Specification means the Specification annexed to or issued with G.T.C.C. and shall include the schedules & drawings attached thereto as well as all samples and pattern, if any.

  • TENDER SPECIFICATIONS means the Scope of Work, Special Instructions / Conditions, Technical specifications/requirement , Appendices, Site Information and drawings pertaining to the work and any other relevant reference in the Tender Document for which the Bidder are required to submit their offer.

  • Original manufacturer means the original component manufacturer, the original equipment manufacturer, or the contract manufacturer.

  • Standard Software means Software identified as such in Appendix 4 of the Contract Agreement and such other Software as the parties may agree in writing to be Standard Software.

  • Improvement warranty means an applicant's unconditional warranty that the

  • Swap Specification means, with respect to any Swap, the Rules or other trading protocols containing specifications for such Swap, as adopted, amended, supplemented or otherwise modified from time to time by BSEF.

  • Contract Quantity means the quantity of Delivered Energy expected to be delivered by Seller during each Contract Year as set forth in the Cover Sheet.

  • Airport Ground Support Equipment means vehicles and equipment used at an airport to service aircraft between flights.