Job Postings and Applications If a vacancy or a new job is created for which union personnel might reasonably be recruited, the following shall apply:
(a) If the vacancy or new job has a duration of thirty (30) calendar days or more, the vacancy or new job including salary range, a summary of the job description, the required qualifications, the hours of work, including start and stop times and days off, the work area and the commencement date shall, before being filled, be posted for a minimum of seven (7) calendar days, in a manner which gives all employees access to such information, provided that no employees shall be entitled to relieve other regular employees under this clause on more than two (2) occasions in one calendar year unless the Employer and the Union otherwise agree in good faith.
(b) Notwithstanding (a) above, if a temporary absence is one of less than ninety (90) calendar days, the work of the absent employee may be performed by employees working in float pool positions, where float pools exist.
(c) Notwithstanding (a) above, if the vacancy is a temporary one of less than ninety (90) calendar days and the work is not being performed by a float employee, the position shall not be posted and instead shall be filled as follows:
(i) where practicable by qualified regular employees who have indicated in writing their desire to work in such position consistent with the requirements of Article 14. Should a vacancy under this Article result in backfilling of more than one (1) vacancy (including the initial vacancy) the second (2nd) vacancy may be filled by an employee registered for casual work unless the Employer and the Union agree otherwise in good faith. If the application of this paragraph requires the Employer to pay overtime to the employee pursuant to Article 19, the proposed move shall not be made. An employee who accepts work under this provision is not eligible to work in another Article 16.01(c) assignment that conflicts with the accepted one. Probationary employees and employees undergoing a qualifying period shall not be considered for a 16.01(c) assignment in a different classification.
(ii) by employees registered for casual work in accordance with the casual addendum.
(iii) in cases of unanticipated or unplanned temporary absences, such temporary absence may first be filled under (c)(ii) for a period of up to seven (7) days.
(d) A part-time employee who has accepted a casual assignment which conflicts with a temporary vacancy referred to in paragraph (c)(i) above shall be considered unavailable for such temporary vacancy. A part-time employee who has accepted a temporary vacancy referred to in paragraph (c)(i) above which conflicts with a casual assignment shall be considered unavailable for such casual assignment. Where an employee declines an offer to work under (c)(i) the Employer need not offer the work again to that employee under (c)(ii), if she/he is also registered for casual work.
(e) Existing local agreements will be in force and effect (including termination clauses) unless changed by mutual agreement by the parties at the local level.
(f) Where the local agreement covering access to work by part-time employees (former “15.01c”) does not contain a termination clause, the agreement may be terminated on giving of six (6) months’ notice by either party.
(g) By mutual agreement, the parties may vary the job posting process set out in Article 16.01.
Applications for Payment 9.3.1 At least ten days before the date for each progress payment established in the State- Contractor Agreement, the Contractor shall submit to the Architect an itemized Application for Payment, notarized if required, supported by such data substantiating the Contractor's right to payment as the State or the Architect may require. The application for payment must, at a minimum, reflect retainage and the required waivers of lien and any other support documentation enumerated elsewhere in the Contract Documents.
9.3.2 Unless otherwise provided in the Contract Documents, payments will be made on account of materials or equipment not incorporated in the Work but delivered and suitably stored at the site and, if approved in advance by the State, payments may similarly be made for materials or equipment suitably stored at some other location agreed upon in writing. Payments for materials or equipment stored on or off the site shall be conditioned upon submission by the Contractor of bills of sale or such other procedures satisfactory to the State to establish the State's title to such materials or equipment or otherwise protect the State's interest, including applicable insurance and transportation to the site for those materials and equipment stored off the site.
9.3.3 The Contractor warrants that title to all Work, materials and equipment covered by an Application for Payment will pass to the State either by incorporation in the construction or upon the receipt of payment by the Contractor, whichever occurs first, free and clear of all liens, claims, security interests or encumbrances, hereinafter referred to in this Article 9 as "liens"; and that no Work, materials or equipment covered by an Application for Payment will have been acquired by the Contractor, or by any other person performing Work at the site or furnishing materials and equipment for the Project, subject to an agreement under which an interest therein or an encumbrance thereon is retained by the seller or otherwise imposed by the Contractor or such other person.
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Motions for Directions (1) Class Counsel or the Settling Defendants may apply to the Ontario Court and/or such other courts as may be required by the Courts for directions in respect of the interpretation, implementation and administration of this Settlement Agreement. Unless the Courts order otherwise, motions for directions that do not relate specifically to the matters affecting the Quebec Action shall be determined by the Ontario Court.
(2) All motions contemplated by this Settlement Agreement shall be on notice to the Parties.
Solicitations for Subcontracts, Including Procurements of Materials and Equipment In all solicitations either by competitive bidding or negotiation made by the Engineer for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the Engineer of the Engineer's obligations under this contract and the Regulations relative to nondiscrimination on the grounds of race, color, or national origin.
Reservations for Registry Operations The following ASCII labels must be withheld from registration or allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: WWW, RDDS and WHOIS. The following ASCII label must be allocated to Registry Operator at All Levels for use in connection with the operation of the registry for the TLD: NIC. Registry Operator may activate WWW, RDDS and WHOIS in the DNS, but must activate NIC in the DNS, as necessary for the operation of the TLD. None of WWW, RDDS, WHOIS or NIC may be released or registered to any person (other than Registry Operator) or third party. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD all such withheld or allocated names shall be transferred as specified by ICANN. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator may activate in the DNS at All Levels up to one hundred (100) names (plus their IDN variants, where applicable) necessary for the operation or the promotion of the TLD. Registry Operator must act as the Registered Name Holder of such names as that term is defined in the then-current ICANN Registrar Accreditation Agreement (RAA). These activations will be considered Transactions for purposes of Section 6.1 of the Agreement. Registry Operator must either (i) register such names through an ICANN-accredited registrar; or (ii) self-allocate such names and with respect to those names submit to and be responsible to ICANN for compliance with ICANN Consensus Policies and the obligations set forth in Subsections 3.7.7.1 through 3.7.7.12 of the then-current RAA (or any other replacement clause setting out the terms of the registration agreement between a registrar and a registered name holder). At Registry Operator’s discretion and in compliance with all other terms of this Agreement, such names may be released for registration to another person or entity. Registry Operator may withhold from registration or allocate to Registry Operator names (including their IDN variants, where applicable) at All Levels in accordance with Section 2.6 of the Agreement. Such names may not be activated in the DNS, but may be released for registration to another person or entity at Registry Operator’s discretion. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names that remain withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Upon ICANN’s request, Registry Operator shall provide a listing of all names withheld or allocated to Registry Operator pursuant to Section 2.6 of the Agreement. Registry Operator may self-allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.
200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
