Asphalt Cores Sample Clauses

Asphalt Cores. Consultant shall maintain such personal contact with the Project as is necessary to assure themselves of compliance, in every material respect, approved construction documents. Personal contact shall include visits to the project site by the Consultant or its qualified representative to observe construction. Observation and testing shall consist of visual observation of earthwork activities and taking field density and moisture tests for the purpose of ascertaining that the work is in substantial conformance with the contract documents, including the project plans and specifications. Such observation and testing shall not be relied upon by others as acceptance of the work nor shall it be construed to relieve the contractor in any way from his obligation and responsibilities under the construction contract. Specifically, but without limitations, observation and testing shall not require the technician and engineer to assume responsibilities for the means and methods of construction nor for safety on the jobsite. Refer to Fee Proposal. DATE: 02/25/19 PROPOSAL No.: P15710 CLIENT: OHLONE COMMUNITY COLLEGE DISTRICT C/O GILBANE BUILDING COMPANY PROJECT: OHLONE COLLEGE - NORTH PARKING AND STORAGE LOCATION: FREMONT, CA CONCRETE (IOR TO INSPECT REBAR ) FOOTINGS/GRADE BEAMS 7 8 $82 $4,592 RETAINING WALLS 10 8 $82 $6,560 WALLS & COLUMNS 2 8 $82 $1,312 SLAB ON GRADE 2 8 $82 $1,312 OTHER - MISC CONCRETE 4 4 $82 $1,312 DSA MASONRY - XXXXX 0 XXXXXXX XXXX XXXXXXXXX 9 8 $100 $7,200 PRE-GROUT REBAR INSPECTIONS 4 4 $100 $1,600 GROUT PLACEMENT 4 8 $100 $3,200 STRUCTURAL STEEL MISC STEEL/STAIRS/HANDRAILS - PERIODIC INSPECTION 8 4 $82 $2,624 SEISMIC ASSEMBLY - WOOD ROOF/FLOOR DIAPHRAGM NAILING 2 4 $82 $656 MISC FIELD TESTING SERVICES EPOXY BOLTS/REBAR - INSTALL OBSERVATION 4 4 $82 $1,312 EPOXY BOLTS/REBAR - PROOF LOADING/PULL TESTING (PORTAL TO PORTAL) 4 4 $82 $1,312 EXPANSION ANCHOR - INSTALL OBSERVATION 4 4 $82 $1,312 EXPANSION ANCHOR - TORQUE TESTING (PORTAL TO PORTAL) 4 4 $82 $1,312 PORTAL TO PORTAL TRAVEL TIME - PROOF LOAD/PULL TEST/TORQUE TEST EQUIPMENT 8 0.75 $82 $492 PORTAL TO PORTAL MILEAGE - PROOF LOAD/PULL TEST/TORQUE TEST EQUIPMENT 8 32 $0.58 $148 GEOTECHNICAL SERVICES BUILDING PAD 2 4 $90 $720 TRENCH BACKFILL 5 4 $90 $1,800 RETAINING WALL BACKFILL 5 8 $90 $3,600 SITEWORK SUBGRADE AND/OR BASEROCK 5 4 $90 $1,800 PAVEMENT SUBGRADE 10 8 $90 $7,200 PAVEMENT BASEROCK 10 8 $90 $7,200 A/C COMPACTION 5 8 $90 $3,600 FOOTING INSPECTION 1 8 $125 $1,000 PORTAL TO PORTAL TRAVEL ...
Sample 1
AutoNDA by SimpleDocs
Asphalt Cores. Consultant shall maintain such personal contact with the Project as is necessary to assure themselves of compliance, in every material respect, approved construction documents. Personal contact shall include visits to the project site by the Consultant or its qualified representative to
Sample 1Sample 2
Asphalt Cores. Bulk specific gravity 25.00 Asphalt content (extraction) 100.00 Aggregate gradation (extracted aggregate) 100.00 Maximum specific gravity (Rice method) 125.00 Sample preparation (per core) 35.00
Sample 1
Asphalt Cores. Consultant shall maintain such personal contact with the Project as is necessary to assure themselves of compliance, in every material respect, approved construction documents. Personal contact shall include visits to the project site by the Consultant or its qualified representative to observe construction. Observation and testing shall consist of visual observation of earthwork activities and taking field density and moisture tests for the purpose of ascertaining that the work is in substantial conformance with the contract documents, including the project plans and specifications. Such observation and testing shall not be relied upon by others as acceptance of the work nor shall it be construed to relieve the contractor in any way from his obligation and responsibilities under the construction contract. Specifically, but without limitations, observation and testing shall not require the technician and engineer to assume responsibilities for the means and methods of construction nor for safety on the jobsite. Firm Name: Each Respondent shall complete the following pricing proposal for each type of test/inspection identified below.
Sample 1

Related to Asphalt Cores

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins. (2) Maintain waterbars, drainage dips, and other water diversion measures. (3) During active use, patrol and maintain functional drainage. (4) Repair damaged culvert ends.

  • Pipelines Developer shall have no interest in the pipeline gathering system, which gathering system shall remain the sole property of Operator or its Affiliates and shall be maintained at their sole cost and expense.

  • Safety Equipment Should the employment duties of an employee in the bargaining unit require use of any equipment or gear to insure the safety of the employee or others, the District agrees to furnish such equipment or gear.

  • TOOL STORAGE 1. A company shall provide on all construction jobs in towns and cities, and elsewhere where reasonably necessary and practicable (or if requested buy the employee), a suitable and secure waterproof lock-up solely for the purpose of storing employees’ tools, and on multi-storey and major projects the company shall provide, where possible, a suitable lock-up for employees’ tools within a reasonable distance of the work area of large groups of employees. 2. Where an employee is absent from work because of illness or accident and has advised the company in accordance with Clause 33 – Personal Leave of the award, the company shall ensure that the employee’s tools are securely stored during his/her absence.

  • Irrigation An irrigation reduced pressure zone (hereinafter referred to as “RPZ”) is required for any irrigation systems and must be installed by the Developer and/or eventual lot owner and tested in accordance with the Minnesota Department of Health Guidelines for Designing Backflow Prevention Assembly Installations (hereinafter referred to as “Guidelines”). The initial test results and certification shall be submitted to the City of Maple Grove Public Works Department. Subsequently, the RPZ must be tested, per the Guidelines, at least annually by a certified tester with the results reported to the City of Maple Grove Building Department and the RPZ must be rebuilt as needed in accordance with the Guidelines. Test/rebuilt reports shall be mailed or faxed to the City of Maple Grove Building Department at (000) 000-0000. The irrigation system shall be designed, and the Plans shall be modified accordingly, prior to the issuance of any permits for the development of the Property, to accommodate a 1-inch water meter and a maximum flow of 50 gallons per minute.

  • Generators Temporary installation of generators, and permanent installation of generators that are placed inside existing non-residential buildings or that occupy an area under 50 square feet behind the building they serve.

  • Television Equipment Recycling Program If this Contract is for the purchase or lease of covered television equipment, then Contractor certifies that it is compliance with Subchapter Z, Chapter 361 of the Texas Health and Safety Code related to the Television Equipment Recycling Program.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.64 – DEBARMENT AND SUSPENSION CERTIFICATION (3/18). Pursuant to 2 CFR 180 and 2 CFR 417, Purchaser shall certify and obtain certifications from its Subcontractors regarding debarment, suspension, ineligibility, and voluntary exclusion, including additional Subcontractors obtained after award of this contract. “Subcontractors” are participants in lower tier covered transactions. Purchaser may rely upon a certification of a prospective Subcontractor that it is not proposed for debarment under 48 CFR 9.4, debarred, suspended, ineligible, or voluntarily excluded from participating in covered transactions or timber sales, unless Purchaser knows that the certification is erroneous. Purchaser shall keep the certifications of its Subcontractors on file until timber sale Termination Date and any extensions thereof, and will provide a copy at the written request of Contracting Officer. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render in good faith the certification required by this Subsection. The knowledge and information of Purchaser is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings. If Purchaser knowingly enters into a timber sale transaction with a person who is proposed for debarment under 48 CFR 9.4, suspended, debarred, ineligible, or voluntarily excluded from participation in covered transactions or timber sales, in addition to other remedies available to the Government, Forest Service may pursue available remedies, including suspension and/or debarment. Contracting Officer shall provide a copy of Forms AD-1047 Certification Regarding Debarment, Suspension and Other Responsibility Matters – Primary Covered Transactions and AD-1048 Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion – Lower Tier Covered Transactions to the Purchaser. Purchaser shall complete form AD-1047 and provide to the Contracting Officer upon request. Purchaser shall require each subcontractor to complete form AD-1048 and provide to the Contracting Officer upon request.

  • Engines POSITION SERIAL NO. TOTAL HOURS TOTAL CYCLES HRS/CYCLES SINCE LAST SHOP VISIT Time Remaining to Next LIFE LIMITED PART REMOVAL PART NAME HOURS CYCLES MSN MSN

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!