-- CONTRACTOR PROVIDED EQUIPMENT. In order to introduce the Contractor's branded concepts for preparation and service, the Contractor may install its own equipment, fixtures, or furnishings within the Dining Facilities. Installation of Contractor owned equipment shall require prior written authorization from the ACOR. The ACOR will require installation drawings, plans, or other information needed to evaluate the installation. If additional electric power, water, steam or other changes to the Dining Facility are required to support the installation and maintenance, the cost shall be borne by the Contractor.
-- CONTRACTOR PROVIDED EQUIPMENT. All service trucks must not exceed the manufacturer's GVWR and GAWR when fully equipped.
(a) Mechanic with Service Truck, Type 1 - Heavy Equipment, Heavy Construction/Logging Equipment (dozer, grader, excavator); Automotive, Light and Heavy Truck (Class 1-8); and Inspection and Diagnostic Services
(1) Charging/Starting System Analyzer
(2) Arc welder - minimum 225 amp with air arc capability and industry acceptable repair electrodes
(3) Code Reader (generic)
(4) Oxy/Acetylene torch set with appropriate cutting and welding tips
(5) Air Compressor - minimum of 120 PSI at 20 CFM with tank and appropriate accessories
(6) 1/2", 3/4", & 1" drive impact wrenches and impact sockets to 3"
(7) Hand tool set to accomplish normal field repairs on heavy construction equipment.
(8) Jack stands - (2) 12 ton
(9) Hydraulic Jacks - (2) 12 ton
(10) Vehicle or auxiliary powered portable lighting for field work
(11) Jumper Cables - 20 ft. heavy duty
(12) Hazardous Material spill kit capable of containing and collecting a minimum of 10 gallons of spill
(13) Miscellaneous drain pans
(14) Combination Vise - minimum 4 1/2" jaw
(15) Battery Tester
(16) Volt/Ohm meter
(17) 1/2" drill w/bits to 3/4"
(18) Fuel pressure testing kit
(19) Tap & Die set to 1"
(20) Electric Grinder 4"
(21) Hydraulic pressure Testing kit
(22) Knowledge and skills to perform hydraulic system repairs
(23) Mechanics Service Crane - Mounted to truck as required by manufacturers instructions. Crane shall have a minimum allowable lift of 1,000 lbs. measured 10 horizontal from the pivot verified by manufacturer documentation or the crane capacity chart. An example of a crane capacity load chart is included in Exhibit K.
(24) Consumable goods (listed below)
(b) Mechanic with Service Truck, Type 2 - Automotive, Light and Heavy Truck (Class 1-8) and Inspection and Diagnostic Services
(1) Charging/Starting System Analyzer
(2) Arc Welder
(3) Code Reader (generic)
(4) Oxy/Acetylene torch set with appropriate cutting and welding tips
(5) Air Compressor - minimum of 120 PSI at 12 CFM with tank and appropriate accessories
(6) 1 2" and 3/4" impact wrenches and impact sockets to 2"
(7) Hand tool set to accomplish normal field repairs on all classes of equipment SAE and metric
(8) Jack stands - (2) 2 ton and (2) 12 ton heavy duty
(9) Hydraulic Jacks - (2) 2 ton and (2) 12 ton heavy duty
(10) Vehicle or auxiliary powered portable lighting for field work
(11) Jumper Cables - 20 ft. heavy duty
(12) Hazardous Material spill kit ca...
-- CONTRACTOR PROVIDED EQUIPMENT. Server to access setup, schedules, and control functions, Valcom item VE6025 or equivalent Page zone extenders for a total of 9 audio outputs and inputs, Valcom item VE8001BR and/or VE8004BR or equivalent Fourteen speaker talkback gateways, Valcom item VE8025 or equivalent Administration telephone to access intercom if phone system goes offline, Valcom item VEADP3 or equivalent Port enabling two telephones to engage in paging and phone to phone communications, Valcom item VE8012BR or equivalent 6 AMP power supply for horns, Valcom item VP-6124 or equivalent 15-Watt one-way paging horn for outside, Valcom item V-1036C or equivalent 3-Watt one-way paging horn for outside, Valcom item V-1030 or equivalent Four IP one-way flex horns, Valcom item V-1080 or equivalent Input/output relay contacts module, Valcom item VE8048AR or equivalent Four 10-amp contact relays for driving clocks, Valcom item V-CIO or equivalent
-- CONTRACTOR PROVIDED EQUIPMENT. The Contractor shall ensure that any products, services and other deliverables it provides to DOHMH are compliant with the Policies and Standards.
-- CONTRACTOR PROVIDED EQUIPMENT. D.2.1.1 Equipment Typing. (The typing on these tables is from lowest to highest horsepower.) .
(a) DOZERS Type 3 - Min. 50 HP - 99 HP Type 2 - Min. 100 HP - 199 HP Type 1 - Min. 200 HP - 350 HP .
(b) EXCAVATORS Type 4 - 60 - 80 HP rating Type 3 - 81 - 110 HP rating Type 2 - 111 - 155 HP rating Type 1 - 156 + HP rating .
(c) TRACTOR PLOWS Type 3 - Min. 50 HP - 99 HP Type 2 - Min. 100 HP - 199 HP .
-- CONTRACTOR PROVIDED EQUIPMENT. (a) Weed Wash Containment Station Equipment. Wash systems shall be high pressure with low volume and may be supplemented with low pressure with high volume. High pressure systems have water pressures designated above 1000 pounds per square inch (psi), while high volume systems deliver 10 gallons of water per minute or more.
(b) Self-Contained with Recycling Water System.
-- CONTRACTOR PROVIDED EQUIPMENT. Upon County Facility request, Contractor shall provide for use by its Electroencephalograph (EEG) Technician or EEG Equipment necessary for the provision of EEG when any one of the following conditions exist, as determined by the County:
5.1 County-owned equipment necessary for such treatment is malfunctioning.
5.2 County-owned equipment necessary for such treatment is otherwise in use, or not available.
5.3 Special medical needs of the patient require equipment not owned by County.
-- CONTRACTOR PROVIDED EQUIPMENT. Upon County Facility request, Contractor shall provide for use by its Echocardiography Technologist (Echo Tech) or Echo Equipment necessary for the provision of Echo Diagnostic Services when any one of the following conditions exist, as determined by the County:
5.1 County-owned equipment necessary for such treatment is malfunctioning.
5.2 County-owned equipment necessary for such treatment is otherwise in use or not available.
5.3 Special medical needs of the patient require equipment not owned by County.
-- CONTRACTOR PROVIDED EQUIPMENT. D.2.1.1 Equipment Typing (the typing on these tables is from lowest to highest horsepower and in reverse order as shown on the schedule) DOZERS Type III - Min. 50 HP - 99 HP Type II - Min. 100 HP - 199 HP Type I - Min. 200 HP - 320 HP EXCAVATORS Type IV - 60 - 80 HP rating Type III - 81 - 110 HP rating Type II - 111 - 155 HP rating Type I - 156 + HP rating TRACTOR PLOWS Type III - Min. 50 HP - 99 HP Type II - Min. 100 HP - 199 HP TRANSPORTS Type III - rated at loads up to 35,000 lbs. Type II - rated at loads 35,001 to 69,999 lbs. Type I - rated at loads over 70.000 lbs.
-- CONTRACTOR PROVIDED EQUIPMENT. Chipper unit/trailer(s) and transportation vehicle(s) shall meet all standards established by specification or incorporated by reference and shall be maintained in good repair by the Contractor. .
D.2.1 (a) -- Contractor Provided Personal Protective Equipment.