Critical Defects Sample Clauses

Critical Defects. If Service Restoration with respect to a Critical Defect has not been achieved within one (1) hour after the defect is reported by BTE to Vice President of Operations, as applicable, Vendor shall notify the appropriate Vendor supervisory management of the unrestored condition. Technical and management escalation contact information for the persons set forth in this Section are as follows: Level Name Position Phone # Pager Email Tier3 Support 24/7 TAC Technical Support Engineer [**] n.a. (blackberry) [**] Technical Support Manager Xxxxx Xxxxxxxxx Manager, Service and Support [**] n.a. (blackberry) [**] VP, Service and Support Xxxxx Xxxxx Vice President, Service and Support [**] n.a. (blackberry) [**]
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Critical Defects. Whenever a P0 defect is identified, Xxxxx will treat this as a showstopper. Our real time monitoring on the system will alert Xxxxx support teams of issues and will log the issue on our status page. However, if the status page does not reflect an issue you are experiencing then you must create a JIRA ticket detailing the nature of the critical system problem (see ‘JIRA User Guide’ below). Additionally, you may contact Xxxxx directly on the relevant support number in the ‘Contacting Xxxxx’ section of this document. Xxxxx will investigate and to all reasonable endeavours provide a solution/workaround to get the system back up and running as soon as possible. Throughout the investigation we will update you on the progress. If we find that there is a suitable workaround or that the Defect was prioritised incorrectly Xxxxx have the right to downgrade the defect to a priority that meets Xxxxx’x standard service level requirements. You will be informed why we have downgraded this ticket. If the defect can only be resolved via a code change or script, we will raise a JIRA ticket with Development who will review the defect and provide feedback. Xxxxx will continue to update you on progress. The code change or script will either be part of a hotfix patch or planned roadmap release, depending on whether a suitable workaround for the defect exists.
Sample 1Sample 2Sample 3
Critical Defects. 10.2.2.1. In the event of a critical defect (see section 3.3.1) Visioneer will provide HP with a revised version of the Program no later than XX from the time an acceptable resolution is released. Visioneer will deliver revised versions of XX software to HP no later than XX from the time the XX version is released.
Sample 1Sample 2
Critical Defects. “Critical Defects” means conditions under which the Product is partially inoperative, still usable by BTE, but creates a critical situation with respect to BTE’s business operations. The inoperative portion of the Product severely restricts BTE’s operations.
Sample 1Sample 2
Critical Defects. If Service Restoration with respect to a Critical Defect has not been achieved within one
Sample 1Sample 2
Critical Defects. The presence of a critical defect means that the functionality of the Product is affected, but can be used with the intervention of RAMCO’s Customer support personnel or implies that a program or feature in the Product cannot be used although other programs or features remain unaffected or implies that the Product as a whole functions but a certain feature is somewhat disabled. For a critical defect, RAMCO will put in its commercial reasonable efforts to resolve the failure within 3 working days after registration.
Sample 1
Critical Defects. A critical defect is a can defect which shows product leakage and/or is certain or most likely to produce a leak. A critical defect causes failure to the package to the point where the container will not fulfill its intended purpose and is most likely to result in an unacceptable condition for the consumer.
Sample 1
AutoNDA by SimpleDocs
Critical Defects. “Critical Defects” means conditions under which the Product is inoperative and End User’s inability to use the Product creates an emergency situation with respect to End User’s business operations. This condition generally is characterized by a loss of network connectivity or service affecting a major customer or multiple other customers due to Product failure and requires immediate restoration or correction.
Sample 1
Critical Defects. In the event that the Client notifies Evolutio of a Critical Defect, Evolutio shall acknowledge such notification within four (4) hours during Support Hours. Evolutio shall use commercially reasonable efforts to provide an update to the Evolutio Products that corrects any Critical Defect or provide a work around within five (5) business days from the date of notification, but in any event as quickly as possible.
Sample 1

Related to Critical Defects

  • Latent Defects Notwithstanding anything to the contrary set forth herein, no acceptance, or deemed acceptance, by City pursuant to this Section shall be applicable with respect to any Latent Defects. An acceptance, or deemed acceptance, by City pursuant to this Section shall not mean that City has accepted, or the other party has been relieved of, responsibility for: (i) compliance with the Laws; (ii) the proper application of construction means or methods; or (iii) correcting any portion of the Project if it later is determined that any portion of the Project is inconsistent with the Final Documents and Drawings.

  • Correction of Defects 35.1 The Engineer shall give notice to the Contractor of any Defects before the end of the Defects Liability Period, which begins at Completion and is defined in the Contract Data. The Defects Liability Period shall be extended for as long as Defects remain to be corrected.

  • Title Defects If: (i) the Title Commitment reflects any exceptions to title which are not acceptable to Buyer, in Buyer’s sole discretion; (ii) the Survey discloses any state of fact not acceptable to Buyer, in Buyer’s sole discretion; or (iii) at any time prior to the Closing, title to the Property is encumbered by any exception to title not acceptable to Buyer, in Buyer’s sole discretion (with any such exception or unacceptable state of fact being referred to herein as a “Title Defect”); then Buyer may, on or before the Satisfaction Date (or, in the case of a Title Defect not disclosed by the Title Commitment prior to the Satisfaction Date, within fifteen (15) days after Buyer receives notice of such Title Defect), provide Seller with written notice of such Title Defect. Seller shall have the right, but not the obligation (except as specifically set forth below), during the thirty (30) day period after receipt of such notice, but not later than the Closing, to remove such Title Defect or obtain affirmative title insurance coverage acceptable to Buyer, insuring and defending Buyer against any loss, cost, or expense arising out of or related to such Title Defect (“Affirmative Coverage”). If Seller elects to do so, then on or before the Closing Date (as defined below), Seller shall provide Buyer with reasonable evidence of such removal or provide reasonable evidence that such Title Defect will be removed or that such Affirmative Coverage will be obtained. Notwithstanding anything contained herein to the contrary, Seller shall be obligated to expend whatever sums are required to cure or obtain Affirmative Coverage for the following Title Defects prior to, or at, the Closing:

  • Environmental Defects For purposes of this Agreement, the term “Environmental Defect” means, with respect to any given Asset, an individual environmental condition identified with specificity in Buyer’s Environmental Review that constitutes a material violation of Environmental Laws in effect as of the date of this Agreement in the jurisdiction in which the affected Asset is located, excluding, however any environmental conditions deemed not to be Environmental Defects by application of Section 5.04(c).

  • Title Defect (a) In the event Seller receives notice of any Survey Objection or Title Objection (collectively and individually a “Title Defect”) within the time periods required under Sections 6.1 and 6.2 above, Seller may elect (but shall not be obligated) to attempt to remove, or cause to be removed at its expense, any such Title Defect, and shall provide Purchaser with notice within five (5) days of its receipt of any such objection, of its intention to attempt to cure such any such Title Defect. If Seller elects to attempt to cure any Title Defect, the Scheduled Closing Date shall be extended for a period of twenty (20) days for the purpose of such removal. In the event that (i) Seller elects not to attempt to cure any such Title Defect, or (ii) Seller is unable to cure any such Title Defect within such twenty (20) days from the Scheduled Closing Date, Seller shall so notify Purchaser and Purchaser shall have the right to terminate this Agreement pursuant to this Section 6.3(a) and receive a refund of the Xxxxxxx Money Deposit, together with all interest which has accrued thereon, or to waive such Title Defect and proceed to the Closing. Purchaser shall make such election by written notice to Seller within three (3) days after receipt of Seller’s notice. If Seller has elected to cure a Title Defect and thereafter fails to timely cure such Title Defect, and Purchaser elects to terminate this Agreement, then (i) Seller shall reimburse Purchaser for its reasonable out-of-pocket costs and expenses payable to third parties in connection with this transaction incurred after the date on which Seller informed Purchaser of its election to cure the Title Defect, not to exceed the Reimbursement Cap, and (ii) Purchaser shall promptly return Purchaser’s Information to Seller, after which neither party shall have any further obligation to the other under this Agreement except for the Termination Surviving Obligations. If Purchaser elects to proceed to the Closing, any Title Defects waived by Purchaser shall be deemed to constitute Permitted Exceptions, and there shall be no reduction in the Purchase Price. If, within the three-day period, Purchaser fails to notify Seller of Purchaser’s election to terminate, then Purchaser shall be deemed to have waived the Title Defect and to have elected to proceed to the Closing.

  • Failure to Fulfill Conditions In the event that either of the parties hereto determines that a condition to its respective obligations to consummate the transactions contemplated hereby cannot be fulfilled on or prior to the termination of this Agreement, it will promptly notify the other party.

  • Notice of Environmental Defects If Buyer discovers any alleged Environmental Defect affecting the Assets, Buyer shall promptly notify Seller of such alleged Environmental Defect. To be effective, such notice (an “Environmental Defect Notice”) must (a) be in writing, (b) be received by Seller prior to the expiration of the Examination Period, (c) describe the Environmental Defect in reasonable detail, including (i) the written conclusion of Buyer that an Environmental Defect exists, and (ii) a citation of the Environmental Laws alleged to be violated and a summary of the related facts that substantiate such violation, (d) identify the specific Assets affected by such Environmental Defect, (e) the procedures recommended to correct the Environmental Defect and (f) Buyer’s reasonable good faith estimate of the Environmental Defect Value, for which Buyer would agree to adjust the Purchase Price in order to accept such Environmental Defect if Seller elected Section 7.4(c) as the remedy therefor. Any matters that may otherwise constitute Environmental Defects, but of which Seller has not been specifically notified by Buyer in accordance with the foregoing, together with any environmental matter that does not constitute an Environmental Defect, shall, be deemed to have been waived by Buyer for all purposes and constitute an assumed obligation of Buyer at Closing. Upon receipt of a timely Environmental Defect Notice, upon request by Seller, Buyer shall promptly deliver to Seller copies of all data, records, reports, opinions and other information in Buyer’s possession or control bearing upon or relating to the alleged Environmental Defect and its determination of the Environmental Defect Value, including, without limitation, site plans showing the location of sampling events, boring logs and other field notes describing the sampling methods utilized and the field conditions observed, chain of custody documentation and laboratory reports.

  • REMEDY OF DEFECTS (a) The BUILDER shall remedy, at its expense, any Defect against which the VESSEL is guaranteed under this Article, by making all necessary repairs or replacements at the Shipyard.

  • Remedies for Environmental Defects (a) If any Environmental Defect described in a notice delivered in accordance with Section 4.03 is not cured on or before the Closing, and Seller has not elected to exclude the affected Assets from this sale or Buyer and Seller have not agreed for Seller to indemnify Buyer for the Environmental Defect, then the Purchase Price shall be reduced by the Environmental Defect Value of such Environmental Defect as agreed by the Parties.

  • Environmental Conditions A Phase I environmental site assessment (or update of a previous Phase I and or Phase II environmental site assessment) and, with respect to certain Mortgage Loans, a Phase II environmental site assessment (collectively, an “ESA”) meeting ASTM requirements conducted by a reputable environmental consultant in connection with such Mortgage Loan within 12 months prior to its origination date (or an update of a previous ESA was prepared), and such ESA (i) did not identify the existence of Recognized Environmental Conditions (as such term is defined in ASTM E1527-05 or its successor, hereinafter “Environmental Condition”) at the related Mortgaged Property or the need for further investigation, or (ii) if the existence of an Environmental Condition or need for further investigation was indicated in any such ESA, then at least one of the following statements is true: (A) an amount reasonably estimated by a reputable environmental consultant to be sufficient to cover the estimated cost to cure any material noncompliance with applicable Environmental Laws or the Environmental Condition has been escrowed by the related Mortgagor and is held or controlled by the related lender; (B) if the only Environmental Condition relates to the presence of asbestos-containing materials, radon in indoor air, lead based paint or lead in drinking water, the only recommended action in the ESA is the institution of such a plan, an operations or maintenance plan has been required to be instituted by the related Mortgagor that can reasonably be expected to mitigate the identified risk; (C) the Environmental Condition identified in the related environmental report was remediated, abated or contained in all material respects prior to the date hereof, and, if and as appropriate, a no further action, completion or closure letter or its equivalent, was obtained from the applicable governmental regulatory authority (or the Environmental Condition affecting the related Mortgaged Property was otherwise listed by such governmental authority as “closed” or a reputable environmental consultant has concluded that no further action or investigation is required); (D) an environmental policy or a lender’s pollution legal liability insurance policy that covers liability for the Environmental Condition was obtained from an insurer rated no less than “A-” (or the equivalent) by Xxxxx’x, S&P and/or Fitch; (E) a party not related to the Mortgagor was identified as the responsible party for the Environmental Condition and such responsible party has financial resources reasonably estimated to be adequate to address the situation; or (F) a party related to the Mortgagor having financial resources reasonably estimated to be adequate to address the situation is required to take action. To Seller’s knowledge, except as set forth in the ESA, there is no Environmental Condition at the related Mortgaged Property.

Time is Money Join Law Insider Premium to draft better contracts faster.