Delivery and Acceptance of Product Sample Clauses

Delivery and Acceptance of Product. 7.1. The amount of Product delivered by Seller and accepted by Xxxxx is determined according to the consignment note, railway consignment bill, and in the event of a dispute is determined on the basis of the conclusion of an independent examination of SGS 7.
AutoNDA by SimpleDocs
Delivery and Acceptance of Product. 7.1 Shipping, inspection and Transportation The Product supplied by Supplier shall be packed for transportation and storage in a proper and safe way in accordance with the common practice within the industry and any special requirements required by the Distributors or provided in the laws and regulations. 7.2 Schedule and Destination of Delivery (a) Supplier shall deliver Product in accordance with the delivery schedule specified in each Order. Supplier shall give written notice to relevant Distributor at least two (2) working days in advance of the commencement of delivery of the Product in accordance with each Order. Supplier shall specify in such notice the quantity to be delivered, the carrier and the estimated date of arrival of Product. (b) In the event no schedules of delivery are specified in relevant Order, Supplier shall deliver Product within fifteen (15) working days upon receipt of such Order. (c) Products for Purchaser within PRC shall be delivered to the Purchaser’s designated location. The Products for the Purchaser outside PRC shall be delivered to a port designated by relevant Purchaser. (d) Supplier shall inform relevant Distributor in writing immediately about any difficulties in meeting the Distributor’s Order(s). Upon written confirmation from the relevant Distributor, Supplier may delay the delivery of Product, otherwise Supplier shall be responsible for any Loss suffered by relevant Distributor due to the delay or failure of the delivery of Product.
Delivery and Acceptance of Product. In the event that the terms of the applicable Work Statement or Quote call for METRICS to manufacture, package, and deliver Product under cGMP conditions according to mutually agreed upon Product specifications ("Manufacturing Specifications"), the following terms shall apply: 7.1 METRICS shall provide COMPANY with reasonable prior written notice before implementing changes in the site at which Product is manufactured or the equipment, processes or procedures used to manufacture the Product; provided, however, that METRICS otherwise shall remain obligated to manufacture such Product in accordance with the provisions of the applicable Work Statement or Quote. All Product delivered to COMPANY shall be accompanied by (i) a quality control certificate of analysis ("COA'') confirming that the Product covered by such COA meets the Manufacturing Specifications, and (ii) a copy of the related batch record for the Product (collectively, the "Manufacturing Records"). METRICS shall retain copies of the Manufacturing Records for such periods required by Applicable Laws. 7.2 Promptly after receipt of each shipment of Product and the accompanying Manufacturing Records, COMPANY shall review the Manufacturing Records. If COMPANY determines, in good faith and its reasonable discretion, that any Product that is the subject of such Manufacturing Records does not conform to the applicable Manufacturing Specifications, COMPANY shall provide METRICS with written notice thereof within thirty (30) days following such receipt. Any such notice issued shall state in reasonably sufficient detail the reason why COMPANY believes that the Product does not conform to the applicable Manufacturing Specifications. 7.3 METRICS shall have thirty (30) days to review any assertion by the COMPANY that Product failed to conform to applicable Manufacturing Specifications. In the event that METRICS reasonably disagrees with any such assertion, representative samples of the batch of Product in question shall be submitted to a mutually acceptable independent laboratory or consultant (if not a laboratory analysis issue) for analysis or review, the costs of which shall ultimately be paid by the party that is determined to have been incorrect in its determination of whether the Product conforms to applicable Manufacturing Specifications. 7.4 If any Product fails to conform to the applicable Manufacturing Specifications but is not Non-Conforming Product, COMPANY shall be responsible for the cost of such ...
Delivery and Acceptance of Product 

Related to Delivery and Acceptance of Product

  • Delivery and Acceptance of the Manuscript The Author shall deliver the Contribution to the Editor (or, if requested by the Publisher, to the Publisher) on or before Delivery Date (the “Delivery Date”) electronically in the Publisher's standard requested format or in such other form as may be agreed in writing with the Publisher. The Author shall retain a duplicate copy of the Contribution. The Contribution shall be in a form acceptable to the Publisher (acting reasonably) and in line with the instructions contained in the Publisher’s guidelines as provided to the Author by the Publisher. The Author shall provide at the same time, or earlier if the Publisher reasonably requests, any editorial, publicity or other information (and in such form or format) reasonably required by the Publisher. The Publisher may exercise such additional quality control of the manuscript as it may decide at its sole discretion including through the use of plagiarism checking systems and/or peer review by internal or external reviewers of its choice. If the Publisher decides at its sole discretion that the final manuscript does not conform in quality, content, structure, level or form to the stated requirements of the Publisher, the Publisher shall be entitled to terminate this Agreement in accordance with the provisions of this Clause. The Author must inform the Publisher at the latest on the Delivery Date if the sequence of the naming of any co-authors entering into this Agreement shall be changed. If there are any changes in the authorship (e.g. a co-author joining or leaving), then the Publisher must be notified by the Author in writing immediately and the Parties will amend this Agreement accordingly. The Publisher shall have no obligation to consider publication under this Agreement in the absence of such agreed amendment. If the Author fails to deliver the Contribution in accordance with the provisions of this Clause above by the Delivery Date (or within any extension period given by the Publisher at its sole discretion) or if the Author (or any co-author) dies or becomes incapacitated or otherwise incapable of performing the Author’s obligations under this Agreement, the Publisher shall be entitled to either: (a) elect to continue to perform this Agreement in accordance with its terms and the Publisher may commission an appropriate and competent person (who, in the case of co-authors having entered into this Agreement, may be a co-author) to complete the Contribution; or (b) terminate this Agreement with immediate effect by written notice to the Author or the Author's successors, in which case all rights granted by the Author to the Publisher under this Agreement shall revert to the Author/Author's successors (subject to the provisions of the Clause "Termination"). The Author agrees, at the request of the Publisher, to execute all documents and do all things reasonably required by the Publisher in order to confer to the Publisher all rights intended to be granted under this Agreement. The Author warrants that the Contribution is original except for any excerpts from other works including pre-published illustrations, tables, animations, text quotations, photographs, diagrams, graphs or maps, and whether reproduced from print or electronic or other sources ("Third Party Material") and that any such Third Party Material is in the public domain (or otherwise unprotected by copyright/other rights) or has been included with written permission from or on behalf of the rights holder (and if requested in a form prescribed or approved by the Publisher) at the Author's expense unless otherwise agreed in writing, or is otherwise used in accordance with applicable law. On request from the Publisher, the Author shall in writing indicate the precise sources of these excerpts and their location in the manuscript. The Author shall also retain the written permissions and make them available to the Publisher on request.

  • Delivery and Acceptance All Software provided hereunder will be delivered electronically. We provide trial licenses of the Software for testing and pre-acceptance before purchase and therefore, delivery is deemed complete and accepted when such Software is made available to you. You are responsible for downloading, installing, registering, or otherwise using the Software.

  • INSPECTION AND ACCEPTANCE Cisco may reject any or all of the Work which does not conform to the applicable requirements within 10 business days of Supplier’s delivery of the Work. At Cisco’s option, Cisco may (i) return the non- conforming Work to Supplier for a refund or credit; (ii) requires Supplier to replace the non-conforming Work; or (iii) repair the non-conforming Work so that it meets the requirements. As an alternative to (i) through (iii), Cisco may accept the non-conforming Work conditioned on Supplier providing a refund or credit in an amount Cisco reasonably determines to represent the diminished value of the non-conforming Work. Cisco’s payment to Supplier for Work prior to Xxxxx’s timely rejection of such Work as non- conforming will not be deemed as acceptance by Xxxxx.

  • Acceptance of Products All drawings, specifications, technical documentation, samples, prototypes and Products are approved and/or accepted by Buyer if Buyer does not provide Seller a written objection and/or rejection within 10 days of receipt or other reasonable time established in writing by Seller. Failure to provide written objection and/or rejection will constitute an irrevocable acceptance by the Buyer of the Products. Any written objection and/or rejection must state with specificity all defects and non-conformities upon which Buyer will rely to support its rejection of the Products. ALL DEFECTS AND NON- CONFORMITIES WHICH ARE NOT SPECIFIED ARE WAIVED BY BUYER. If Xxxxx rejects the Products and, if requested by Seller, Xxxxx will return them to Seller at Buyer’s cost, within three days, or Buyer has irrevocably accepted the Products. No attempted revocation of acceptance will be effective, and Buyer will be limited to any available remedies specifically provided in the Terms for breach of warranty. Seller has a reasonable period of time to cure any non- conformity.

  • Electronic Delivery and Acceptance The Company may, in its sole discretion, decide to deliver any documents related to current or future participation in the Plan by electronic means. The Participant hereby consents to receive such documents by electronic delivery and agrees to participate in the Plan through an on-line or electronic system established and maintained by the Company or a third party designated by the Company.

  • Testing and Acceptance Within […***…] after RFM’s delivery of the IC Design File to ST, ST shall manufacture and deliver a commercially reasonable quantity of evaluation Product to RFM for evaluation testing. Upon RFM’s receipt of such Products from ST, RFM shall test such Products with the applicable Evaluation Software and in the applicable Evaluation Circuit Design to determine if the IC Design for such Products conforms to the applicable Specifications. Upon completion of such testing, RFM shall provide ST with the data from such testing (“Evaluation Data”). Upon ST’s receipt of the Evaluation Data, ST shall evaluate whether the Evaluation Data indicates that the IC Design conforms to the Specifications in all material respects. ST shall accept or reject the IC Design based on the Evaluation Data and shall give RFM written notice thereof within seven (7) calendar days after RFM’s delivery of the Evaluation Data to ST. An IC Design will be deemed accepted by ST if RFM has not received notification of rejection of such IC Design from ST within seven (7) calendar days after RFM’s delivery of the applicable Evaluation Data to ST. ST’s refusal to accept the IC Design must be reasonable, must be in writing and must be accompanied by a reasonably detailed description of the manner in which the IC Design fails to comply with the Specifications in all material respects (collectively, the “Deficiencies”) so that RFM can have the opportunity to correct the Deficiencies. If ST properly rejects the IC Design, RFM shall use commercially reasonable efforts to correct any Deficiencies and redeliver a corrected IC Design File within […***…] after RFM’s receipt of the rejection notice and the foregoing provisions set forth in this Section 3.3 shall be reapplied until the IC Design is accepted; provided, however, that upon the […***…] or any subsequent rejection, either party may terminate this Agreement upon thirty (30) calendar days prior written notice to the other party, unless the IC Design is accepted during such notice period.

  • Required Acceptance of Daily Load Deliveries and Notification If the State is harmed by purchaser’s refusal to accept up to 10 truck deliveries of any one sort per day, Purchaser will be in breach of contract and subject to damages as per the D-026.2 and D-027.2 clauses. A truck delivery is all the wood delivered including sorts on super trucks, mule trains and pups brought to the delivery point by a single truck. The Purchaser shall notify the Contract Administrator at least 48 hours in advance if: 1. Purchaser intends to limit the number of truck deliveries accepted on any day to less than that listed above, or 2. Purchaser intends to limit the number of truck deliveries accepted on any day to the number listed above.

  • Offer and Acceptance of Weekend Overtime (a) The Employer is committed to providing reasonable notice to Employees of an offer / cancellation of weekend overtime. To this end, notice will generally be provided prior to the normal meal break on Thursday. Where the Employer is unable to give such notice the Employer may offer I cancel such overtime by notifying affected Employees before the finish time of ordinary hours on Friday. (b) Overtime will be offered on a work required basis. (c) Employees who accept an offer of weekend overtime will be obliged to attend. However, Employees may find themselves unable to fulfil their commitment to attend site. Such Employees will notify the Employer before the planned finishing time on Friday. (d) An Employee may refuse to work weekend overtime if the requirement to do so is plainly unreasonable having regard to: (i) the hours of work that will be worked by that Employee in the week of the weekend overtime; (ii) the amount of weekend overtime worked by the Employee within the previous six weeks; (iii) the Employee’s family responsibilities; and (iv) any other special circumstances peculiar to the Employee.

  • ACKNOWLEDGEMENT AND ACCEPTANCE (a) In accepting the RSUs, the Participant acknowledges and agrees: (i) that the Plan is discretionary in nature and may be amended, cancelled, suspended or terminated by the Company at any time; (ii) that the grant of the RSUs does not create any contractual or other right to receive future grants of RSUs or any right to continue an employment or other relationship with the Company (for the vesting period or otherwise); (iii) that the Participant remains subject to discharge from such relationship to the same extent as if the RSUs had not been granted; (iv) that all determinations with respect to any such future grants, including, but not limited to, when and on what terms they shall be made, will be at the sole discretion of the Committee; (v) that participation in the Plan is voluntary; (vi) that the value of the RSUs is an extraordinary item of compensation that is outside the scope of the Participant’s employment contract if any; and (vii) that the grant of RSUs is not part of normal or expected compensation for purposes of calculating any severance, resignation, redundancy, end of service payments, bonuses, long-service awards, pension or retirement benefits or similar benefits. (b) If the Participant does not want to accept the RSUs on the terms and conditions set out in this Agreement, the Plan and/or any related documents, the Participant may choose the “Decline” button. The RSUs will then be cancelled and no other benefit will be due to the Participant in lieu thereof. If Participant does not “Decline” the RSUs within thirty (30) days from the Grant Date, the Participant shall be deemed to have accepted the RSUs and shall be deemed to have agreed to the terms and conditions set out in this Agreement, the Plan and/or any related documents. (c) The grant of the RSUs is not intended to be a public offering of securities in the Participant’s country of residence (and country of employment, if different). The Company has not submitted any registration statement, prospectus or other filings with the local securities authorities (unless otherwise required under local law), and the grant of the RSUs is not subject to the supervision of the local securities authorities. No employee of the Company or any of the Company’s subsidiaries is permitted to advise the Participant on whether the Participant should acquire Shares as a result of settlement of the RSUs under the Plan. Investment in Shares involves a degree of risk. Before deciding to acquire Shares as a result of settlement of the RSUs, the Participant should carefully consider all risk factors relevant to the acquisition of Shares under the Plan and the Participant should carefully review all of the materials related to the RSUs and the Plan. In addition, the Participant should consult with the Participant’s personal advisor for professional investment advice. (d) The Participant acknowledges and agrees that it is the Participant’s express intent that this Agreement, the Addendum (if applicable) and the Plan and all other documents, notices and legal proceedings entered into, given or instituted pursuant to the award, be drawn up in English. If the Participant has received this Agreement, the Addendum and the Plan or any other documents related to the award translated into a language other than English, and if the meaning of the translated version is different than the English version, the English version shall control. (e) As a condition to the grant of the RSUs, the Participant agrees to repatriate all payments attributable to the Shares and/or cash acquired under the Plan in accordance with local foreign exchange rules and regulations in the Participant’s country of residence (and country of employment, if different). In addition, the Participant also agrees to take any and all actions, and consents to any and all actions taken by the Company and its affiliates and subsidiaries and/or the Employer, as may be required to allow the Company and its affiliates and subsidiaries or the Employer to comply with local laws, rules and regulations in the Participant’s country of residence (and country of employment, if different). Finally, the Participant agrees to take any and all actions as may be required to comply with the Participant’s personal obligations under local laws, rules and regulations in the Participant’s country of residence (and country of employment, if different).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!