Description of the Work Carried Out Sample Clauses

Description of the Work Carried Out. The ProSafe partners of T3.2, in particular JRC, have first proposed the adoption of ISA-TAB-Nano for streamlined nanoEHS experimental data recording within the large FP7 project NANoREG, where the system was adopted in March 2014. As set in the DoW of T3.2, the task leader has established a strong link with FP7 eNanoMapper right from the start of ProSafe. This has led to a positive collaboration between ProSafe WP3 and eNanoMapper (especially UMaastricht and IDEA) that has lasted for the whole duration of ProSafe. eNanoMapper was the 'technical implementation arm' of a streamlined data management strategy within the EU NanoSafety Cluster (NSC), to serve the data needs of any project in that arena. In its technical development of ISA-TAB-Nano tools for the NSC community, eNanoMapper received support from this ProSafe task 3.2. The task leader relayed on several occasions, such as bilateral JRC-UMaastricht/IDEA teleconferences, participation in eNM-promoted NSC meetings in 2016, monthly TC calls of the NanoSafety Cluster WG4 US-EU CoR meetings on databases, etc. the needs of the nanoEHS community, especially of the large project NANoREG, where it has been leading the ISA-TAB-Nano technical implementation. Around early 2016, it appeared that a sufficiently wide community in the NSC endorses the use of ISA-TAB-Nano, as a way to structure the collection of nanoEHS data, be it experimental or literature-based. For experimental data, the approach promoted by JRC in NANoREG for a 'keep I simple' version of ISA-TAB-Nano has been paying off. The US have shown marked interest for this strategy, for instance after the public release by JRC of the NANoREG templates1. Given its specifically dedicated role in the development of, among others, ISA-TAB-Nano, eNanoMapper has published recently a fully descriptive deliverable on this matter2. 1 Xxxxxx S. et al; Data logging templates for the environmental, health and safety assessment of nanomaterials; EUR 28137 EN; doi:10.2787/505397; January 2017
AutoNDA by SimpleDocs
Description of the Work Carried Out. Analytical task and sample preparation Freeze-drying Plasma ashing Microwave digestion ICP-MS analysis:
Description of the Work Carried Out. The work performed at the FIOH focused on assessing the genotoxic and immunotoxic effects of the NFC materials. In vivo studies in mice were used to investigate both acute and subacute responses (24-h and 28-d follow up). For genotoxicity assessment in vivo, the comet assay was performed on lung cells and broncho- alveolar lavage (BAL) fluid cells and the micronucleus assay on bone marrow polychromatic erythrocytes, after single pharyngeal aspiration to female C57BL/6 mice (doses 10, 40, 80 and 200 μg/mouse). Inflammatory effects in vivo were assessed by investigating the influx of inflammatory cells in BAL, mRNA expression levels of relevant cytokines, and histopathological changes in lungs (doses 10 and 40 μg/mouse). These tests, together with in vitro testing performed with the same material under WP5, provide indication, whether the NFC materials studied are able to cause cellular damage or systemic effects. Our study provides new information about the toxicity of NFC and thereby contributes to the hazard assessment of these materials.
Description of the Work Carried Out 

Related to Description of the Work Carried Out

  • Description of the Project THIS SHOULD BE NO MORE THAN A TWO PARAGRAPH DESCRIPTION THAT PROVIDES A BACKGROUND OF THE PROBLEM, AS WELL AS HOW THE CONTRACTOR INTENDS TO SOLVE THE PROBLEM. KEEP IN MIND THAT THE CONTRACT SHOULD “STAND ON ITS OWN,” I.E. ANYONE SHOULD BE ABLE TO PICK IT UP AND FIGURE OUT WHAT IS GOING ON.)

  • Description of the procurement Under this Lot the supplier will provide the below packs (this list is not exhaustive): o Orthopaedic Day Case o Hip Arthroplasty o Knee Arthroplasty o Shoulder Arthroplasty o Arthroscopy- Knee, Hip, Shoulder, Ankle o Hand Surgery o Foot & Ankle Surgery o ACL (Anterior Cruciate Ligament) o Spine- Lumbar, Cervical TERMS AND CONDITIONS / ACTIVITY BASED INCOME (ABI) The terms and conditions of this Agreement and any resulting call-off contract is appended to the ITT. These terms include provisions requiring the payment by the supplier of an ABI management charge in consideration of the award of this Agreement, the management and administration by HTE of the overall contract structure and associated documentation, as well as the requirement to submit regular management information to HTE. SUBMISSION OF EXPRESSIONS OF INTEREST AND PROCUREMENT INFORMATION This exercise will be conducted on the HTE Bravo portal. Candidates wishing to be considered must register expressions of interest as follows: Register on the HTE portal at xxxxx://xxxxxxxxxxxxxxxxx.xxxxxxxxxxxxx.xx.xx. Login to the portal with username/password. Click the SQs/ITTs Open to All Suppliers link. These are the SQs/ITTs open to any registered supplier. Click on the relevant SQ/ ITT to access the content. Click the Express Interest button at the top of the page. This will move the SQ/ITT into your My SQs/My ITTs page. You can access any attachments by clicking Buyer Attachments in the SQ/ITT Details box. Follow the onscreen instructions to complete the SQ/ITT. Submit your reply using the Submit Response button at the top of the page. If you require any further advice, contact the Bravo e- Tendering Help Desk at xxxx@xxxxxxxxxxxxx.xx.xx. Sid4Gov HTE utilises the sid4gov supplier information database. Candidates should register on sid4gov at xxxxx://xxx0xxx.xxxxxxxxxxxxx.xxx.xx/organisation/register and submit their sid4gov company profile for publication on the database. Candidates already registered on sid4gov must ensure information is up to date. Where access to sid4gov is unavailable, please contact the sid4gov helpdesk at xxx0xxx@xxx.xxx.xxx.xx. Please note that sid4gov does not prepopulate any fields of the SQ on HTE's Bravo portal. Candidates must complete the Qualification & Technical Envelopes of the SQ in Bravo in full.

  • DESCRIPTION OF THE PREMISES Prior to, or during the first month of the effective use (transfer of keys) of the rented property and whenever important alterations have been made to the rented property during the rental period, both parties are obliged to draw up a detailed and contradictory description of the property at their joint expense. If one of the parties so requests, the parties will draw up a detailed and contradictory description of the premises at their joint expense at the end of the rental period. In the absence of an initial description of the premises, the tenant is deemed to have received the property in the condition in which it is in at the time they leave, except if the necessary proof to the contrary is provided. The same applies if no final description of the premises has been drawn up by the end date of the contract. After signature by the contracting parties, the description of the premises will be appended to the present agreement. The lessor has the right to make the reimbursement or release of the deposit dependent on the drawing up of the final description of the premises in the presence of the tenant or their representative, at a mutually agreed time. The lessor will make every effort to be present at this description of the premises at a reasonable time.

  • Completion of the Work The Contractor must obtain Material Completion as defined in Section 6.1.2 below prior to any occupancy of the Project.

  • DESCRIPTION OF THE PROPERTY 13.1 The Property as referred to in the Proclamation of Sale shall be deemed to have been correctly and sufficiently described. 13.2 All intended bidders including the Purchaser shall be deemed to have sought independent legal advice, made necessary enquiries, searches and inspection of the Property and is satisfied with the identity, description, state and condition of the Property. 13.3 In the event of any error, misstatement, omission and/or misdescription of any kind relating to the Property in the Proclamation of Sale or any other documents, such error, misstatement, omission and/or misdescription shall not in any manner annul the sale, nor shall there be any adjustment of the Purchase Price nor shall compensation be allowed nor shall the Bank be open to any liability of any form. 13.4 If the land or floor area of the property is found to exceed that as described and additional payment is imposed for the excess area by the Developer and/or relevant authorities, then such additional payment shall be solely and absolutely borne and paid by the Purchaser 13.5 If the land or floor area of the property is found to be less that as described, any claim for the reduced area shall be undertaken solely by the Purchaser against the Developer and/or such party and neither the Assignee/ Bank , the Assignee/ Bank’s solicitors nor the Auctioneer shall in any way responsible or liable for such claim. The auction sale herein shall not be annulled and there shall not be any adjustment of the Purchase Price as a result of such shortfall in the area of the Property.

  • Description of the service 10.1.1 Automatic transfer service implies a transfer by the bank of the funds from the client’s account without further consent of the client, on the basis of fixed amount determined by the client in its application form or of information provided by the client’s creditor to the bank on the client’s debt. 10.1.2 The parties agree that the payment order created (generated) by the bank for the purposes of automatic transfer services shall have the legal force equal to the document having been printed on the paper and executed by the person(s) authorized to manage of the account. 10.1.3 The bank shall carry out the automatic transfer services in accordance with requirements and conditions stipulated in this agreement, the application on registration for automatic transfer service and the sources disseminated by the bank. 10.1.4 For the purposes of obtaining automatic transfer services the client shall apply to the bank with the application as per paragraph 1.2 of this agreement.

  • CONTRACTOR NAME CHANGE An amendment is required to change the Contractor's name as listed on this Agreement. Upon receipt of legal documentation of the name change the State will process the amendment. Payment of invoices presented with a new name cannot be paid prior to approval of said amendment.

  • SCOPE OF THE WORK The Contractor shall furnish all the materials, perform all of the Work, and do all things required by the Contract Documents.

  • Description of Work that has been omitted or

  • Description of the Services 1.1 The scope of the service to be rendered is described more fully in the Annexures and Schedules referred to below: ❑ Annexure A – Scope / Specification ❑ Annexure C – Pricing Schedule The Deliverables, due for completion by and governed by this Schedule 1. In the event that the Service Provider fails to meet the delivery dates as agreed, the following penalties will be imposed:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!