Detailed Designs Sample Clauses

Detailed Designs. ‌ The Contractor shall, in accordance with the procedures set out in Schedule 5 (Design and Plan Certification Process and Review Procedure), provide the Province with copies of all detailed designs (including, but not limited to, design reports, detailed design drawings, shop drawings, and construction specifications, and for express clarity, including any changes to detailed designs previously provided to the Province in accordance with this Section 5.9) for the Project or any rehabilitation as they are prepared, and invite comment from the Province on the detailed designs, all in accordance with the procedures set out in Schedule 5. The Contractor shall not commence work on any component of the Project if such work has not been addressed in detailed designs provided to the Province in accordance with this Section 5.9. The parties expressly intend and agree that neither comment by the Province nor failure by the Province to comment or otherwise participate in any manner in respect of the procedure prescribed by Schedule 5 shall shift or detract from the Contractor’s absolute responsibility under Section 5.3 to carry out the Project or any rehabilitation in accordance with the Technical Requirements.
Sample 1See All (4)
AutoNDA by SimpleDocs
Detailed Designs. The Contractor shall, in accordance with the procedures set out in Schedule 5 (Design and Plan Certification Process and Review Procedure), provide the Province with copies of all detailed designs (including, but not limited to, design reports, detailed design drawings and construction specifications) for the Project as they are prepared, and invite comment from the Province on the detailed designs, all in accordance with the procedures set out in Schedule 5. The Contractor shall not commence work on any component of the Project if such work has not been addressed in detailed designs provided to the Province in accordance with this Section 5.9. The parties expressly intend and agree that no comment or failure to comment or other participation by the Province under the procedure prescribed by Schedule 5 shall shift or detract from the Contractor’s absolute responsibility under Section 5.3 to carry out the Project in accordance with the Project Requirements.
Sample 1
Detailed Designs. The Contractor shall, in accordance with the procedures set out in Schedule 5 (Design and Plan Certification Process and Review Procedure), provide the Province with copies of all detailed designs (including, but not limited to, design reports, detailed design drawings, shop drawings and construction specifications, and for express clarity including any changes to detailed designs previously provided to the Province in accordance with this Section 5.9) for the Project, and, if applicable, for any Modification, as they are prepared, and invite comment from the Province on the detailed designs, all in accordance with the procedures set out in Schedule 5. The Contractor shall not commence work on any component of the Project, or, if applicable, on any component of a Modification, if such work has not been addressed in detailed designs provided to the Province in accordance with this Section 5.9. The parties expressly intend and agree that neither comment by the Province nor failure by the Province to comment or otherwise participate in any manner in respect of the procedure prescribed by Schedule 5 shall shift or detract from the Contractor’s absolute responsibility under Section 5.3 to carry out the Project in accordance with the Project Requirements.
Sample 1
Detailed Designs. [NTD: This section of the Schedule will be produced from the detailed designs as submitted, and if necessary amended or supplemented, by the Contractor as required in accordance with Schedule 5 (Design and Plan Certification Process and Review Procedure). The ITP specifies the contents of the Proponents’ detailed design submissions at:
Sample 1
Detailed Designs. This task consists of the detailed design of project improvements using the current City, regional and all other relevant design standards. This task includes design for: modernizing Xxxxxx Avenue from Xxxxxxx Avenue to 15th Street (incl. single lane roundabouts at 9th Street and Xxxxxx Avenue and 15th Street and Xxxxxx Avenue, typical sections, curb ramps, pedestrian crossings), landscaping, irrigation, signing, striping, illumination, erosion and sediment control, temporary traffic control plans and detour issue mitigation plan (to address traffic control deficiencies along detour routes and expected cut-through routes from lane closures). To include the line and grade design for any necessary retaining walls.
Sample 1
Detailed Designs. The Contractor shall, in accordance with the procedures set out in Schedule 5 (Design and Plan Certification Process and Review Procedure), provide the Province with copies of all detailed designs (including, but not limited to, design reports, detailed design drawings, shop drawings, and construction specifications, and for express clarity, including any changes to detailed designs previously provided to the Province in accordance with this Section 5.9) for the Project as they are prepared, and invite comment from the Province on the detailed designs, all in accordance with the procedures set out in Schedule 5 (Design and Plan Certification Process and Review Procedure). The Contractor shall not commence work on any component of the Project if such work has not been addressed in detailed designs provided to the Province in accordance with this Section 5.9. The parties expressly intend and agree that neither comment by the Province nor failure by the Province to comment or otherwise participate in any manner in respect of the procedure prescribed by Schedule 5 (Design and Plan Certification Process and Review Procedure) shall shift or detract from the Contractor’s absolute responsibility under Section 5.3 (Contractor’s Responsibility to Carry Out Project Requirements) to carry out the Project in accordance with the Project Requirements.
Sample 1

Related to Detailed Designs

  • Schematic Design See Section 2, Part 1, Article 2.1.4, Paragraph 2.1.4.2.

  • Detailed Description of Services / Statement of Work Describe fully the services that Contractor will provide, or add and attach Exhibit B to this Agreement.

  • Schematic Design Phase 1.2.1 Based on the mutually agreed upon Program of Requirements, Amount Available for the Construction Contract and the Project Schedule, the Architect/Engineer shall prepare sufficient alternative approaches utilizing BIM for design and construction of the Project to satisfy Owner’s project requirements and shall, at completion of this phase, submit Schematic Design Documents derived from the model in accordance with the BIM Execution Plan, “Facility Design Guidelines” and any additional requirements set forth in Article 15. The Architect/Engineer shall review alternative approaches to design and construction for the Project as they are being modeled at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by the Owner within the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Schematic Design. The Architect/Engineer shall provide the Construction Manager with a compact disc containing documents and data files derived from the model to assist the Construction Manager in fulfilling its responsibilities to the Owner. 1.2.2 Architect/Engineer shall provide all services necessary to perform the services of this phase (preparation of model(s), relevant data, decision support model views and Schematic Design Documents) including, without limitation, unless otherwise approved by Owner, the preparation and prompt delivery of all items specified in the BIM Execution Plan and “Facility Design Guidelines”. 1.2.3 Architect/Engineer shall work closely with Owner in preparation of schematic drawings and shall specifically conform to Owner’s requirements regarding aesthetic design issues. 1.2.4 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments. 1.2.5 Before proceeding into the Design Development Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Schematic Design documents and approval of the Architect/Engineer’s preliminary Estimated Construction Cost and schedule. 1.2.6 The Architect/Engineer shall participate in a final review of the Schematic Design Documents and model(s) with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Schematic Design Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments, any of which may be appealed for good cause.

  • Project Design Applicants must design a project that provides access to health services to enable eligible women and men experiencing health needs to secure and maintain safe and accessible quality screening and diagnostic services, comprehensive family planning, and/ or other women’s health services. A. Applicants are encouraged to emphasize the following components in the design of their projects. Projects must: 1. Use a collaborative approach to maximize existing community resources and avoid duplication of effort; 2. Enhance systems and local processes to make it easier for people to transition to, from, and between services; 3. Address barriers to ensure services are accessible to people regardless of setting or location; and 4. Promote improvement and positively impact health and well-being through coordinated service delivery. B. To be effective, services and activities provided or made available as part of the Proposed Project should have policies and procedures in place and include with the application as an attachment that: 1. Delineate the timely provision of services; 2. Deem Client eligibility and service provision as soon as possible and no later than 30 calendar days from initial request; 3. Require staff to assess and prioritize Client needs; 4. Implement with model fidelity to an evidence-based program or based upon best available research; 5. Plan in partnership with the person and are inclusive; 6. Provide in an environment that is most appropriate and based on a person’s preference including reasonable clinic/reception wait times that are not a barrier to care; 7. Provide referral sources for Clients that cannot be served or receive a specific service; 8. Are culturally and linguistically sensitive; 9. Tailor services to a person’s unique strengths and needs; 10. Manage funds to ensure established Clients continuity of care throughout budget year; 11. Continue to provide services to established Clients after allocated funds are expended; 12. Have processes to identify and eliminate possible barriers to care; 13. Do not deny services due to inability to pay; 14. Have appropriate key personnel and required staff to meet the medical and health needs of Clients; 15. Bill services appropriately and timely through TMHP; 16. Effectively communicate and document information related to health care needs with next steps available to Client; 17. Establish outreach and education plan for the community; and 18. Outline successful delivery of direct clinical services to Clients By submitting an Application under this RFA, the Applicant certifies that Applicant has or will have at time of grant award services, policies, or procedures that conform with the requirements in this section as applicable. HHSC, in its sole discretion, may request to review relevant documentation during the project period as necessary to ensure program fidelity.

  • Programming Phase Schematic Design Phase: 2.2.1.3. Design Development Phase:

  • Operation and Maintenance Manuals Receipts for transmittal of Operation and Maintenance Manuals, Brochures and Data to the Design Professional (or Commissioning Agent) as required by Section 6.1.1.5.

  • Development Records Each Party shall maintain complete, current and accurate records of all Development activities conducted by it hereunder, and all data and other information resulting from such activities. Such records shall fully and properly reflect all work done and results achieved in the performance of the Development activities in good scientific manner appropriate for regulatory and patent purposes. Each Party shall document all non-clinical studies and Clinical Trials in formal written study reports according to Applicable Laws and national and international guidelines (e.g., ICH, cGCP, cGLP, and cGMP).

  • Application of Funding Techniques to Programs 6.3.1 The State shall apply the following funding techniques when requesting Federal funds for the component cash flows of the programs listed in sections 4.2 and 4.3 of this Agreement. 6.3.2 Programs Below are programs listed in Section 4.2 and Section 4.3.

  • LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION AND DISASSEMBLY You may not reverse engineer, decompile, or disassemble the Software, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

  • Distribution of Materials You will keep an accurate record of the names and addresses of all persons to whom you give copies of the Registration Statement, the Prospectus, any Preliminary Prospectus (or any amendment or supplement thereto) or any Offering Circular or any Preliminary Offering Circular and, when furnished with any subsequent amendment to the Registration Statement, any subsequent Prospectus, any subsequent Offering Circular or any memorandum outlining changes in the Registration Statement or any Prospectus or Offering Circular, you will, upon request of the Manager, promptly forward copies thereof to such persons.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!