DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES Sample Clauses

DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. 9.1 Distribution Services price information: The Distributor’s Pricing Policy and Methodology, and a schedule of Price Categories, Tariff Options (if any), and Tariff Rates, are set out in schedule 9.
Sample 1Sample 2Sample 3See All (25)
AutoNDA by SimpleDocs
DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. 9.1 Tariff Rate changes: Unless otherwise agreed with the Retailer (such agreement not to be unreasonably withheld or delayed), the Distributor may change its Tariff Rates no more than once in any period of 12 consecutive months, unless a Tariff Rate change results from: (a) a change in any “pass-through costs” and/or “recoverable costs” as defined in the Commerce Act (Electricity Distribution Services Input Methodologies) Determination 2010, as amended or substituted from time to time; or (b) a change in the Distributor providing new Distribution Services or materially changing existing Distribution Services, provided that any proposed price change will only apply to ICPs affected by the change in Distribution Services; or (c) a change in the law (including any regulations and the Code); or (d) any recommendation, determination, direction or decision of a regulatory agency. Nothing in this clause 9.1 prevents the Distributor from decreasing a Tariff Rate without the Retailer’s agreement, or from increasing a Tariff Rate if agreed by the Retailer. Schedule 8 to this agreement will be deemed to be amended to reflect changes to the Tariff Rates pursuant to this clause 9.
Sample 1Sample 2Sample 3See All (5)
DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. 7.1 Distribution Services pricing information: Schedule 7 sets out information about how the Trader can access information about the Distributor’s: (a) Pricing Structure; (b) Price Categories; (c) Price Options (if any); and (d) Prices. The Distributor must ensure that the information it makes available in accordance with Schedule 7 is available in a standard, downloadable electronic document format in a form that permits electronic search and copy functions.
Sample 1Sample 2Sample 3See All (4)
DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. Distribution Services pricing information: Appendix C of this Schedule 6 sets out information about how the Retailer can access information about the Distributor’s:
Sample 1Sample 2See All (4)
DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. Schedules 6.3.1-6.3.7 set out the Distributor’s obligations in relation to pricing information for Distribution Services the Distributor must make available on its website, and the process the Distributor must comply with when proposing or notifying changes to its Prices and Pricing Structure.
Sample 1Sample 2Sample 3
DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. 9.1 Tariff Rate changes: Unless otherwise agreed with the Retailer (such agreement not to be unreasonably withheld or delayed), the Distributor may change its Tariff Rates no more than once in any period of 12 consecutive months, unless a Tariff Rate change results from: (a) a change in any “pass-through costs” and/or “recoverable costs” as defined in the Commerce Act (Electricity Distribution Services Input Methodologies) Determination 2010, as amended or substituted from time to time; or (b) the Distributor providing new Distribution Services or materially changing existing Distribution Services, provided that any proposed price change will only apply to ICPs affected by the change in Distribution Services; or (c) a change in the law (including any regulations and the Code); or (d) any determination, direction or decision of a regulatory agency. Nothing in this clause 9.1 prevents the Distributor from decreasing a Tariff Rate without the Retailer’s agreement, or from increasing a Tariff Rate if agreed by the Retailer. Schedule 8 to this agreement will be deemed to be amended to reflect changes to the Tariff Rates pursuant to this clause 9.
Sample 1
DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. 10.1 Distribution Services price information: The documents setting out the Distributor’s Pricing Policy and Methodology, its Price Categories, its Tariff Options (if any), and its Tariff Rates, are as set out in schedule 8. 10.2 Tariff Rate changes: Unless otherwise agreed with the Retailer, the Distributor may not change its Tariff Rates more than once in any period of 12 consecutive months, unless a change is a material increase to one or more existing Tariff Rates and results from a change in: (a) a cost that is a pass-through cost or a recoverable cost as defined in the Commerce Act (Electricity Distribution Services Input Methodologies) Determination 2010, as amended or substituted from time to time; (b) the Distributor providing new Distribution Services or materially changing existing Distribution Services, provided that any proposed Tariff Rate change will only apply to ICPs affected by the new or changed Distribution Services; (c) the law (including any regulations and the Code); or (d) any determination, direction or decision of a regulatory agency.
Sample 1
AutoNDA by SimpleDocs
DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES. Distribution Services pricing information: The Distribution Services Charges will be calculated in accordance with the Prices and pricing information referred to in Schedule 7. Schedule 7 identifies the reference material that defines the Distributor’s: (a) Pricing Structure; (b) Price Categories; and (c) Standard Prices. (d) The Distributor must ensure that the information it makes available in accordance with Schedule 7 is available in a standard, downloadable electronic document format in a form that permits electronic search and copy functions. Changes to Pricing Structure, Price Categories and Prices: The Distributor may change: (a) its Prices as set out in clauses 7.3 and 7.5; and (b) its Pricing Structure as set out in clauses 7.4 and 7.5; and (c) its Price Categories at any time, provided that if any such change would have the effect of increasing the Price that applies at one or more ICPs for which the Retailer is currently responsible, the change must be carried out in accordance with the requirements of clauses 7.3 to 7.5 (to the extent applicable).
Sample 1

Related to DISTRIBUTION SERVICES PRICES AND PROCESS FOR CHANGING PRICES

  • Prices and Services Billing 8.1 SCHEDULE OF PRICES AND TERMS Competitive Supplier agrees to provide Firm Full-Requirements Power Supply and other related services as expressly set forth herein in accordance with the prices and terms included in EXHIBIT A to this ESA, which exhibit is hereby incorporated by reference into this ESA.

  • Price Schedule, Payment Terms and Billing, and Price Adjustments (a) Price Schedule: Price Schedule under this Contract is set forth in Exhibit B.

  • Product Changes Vocera shall have the right, in its absolute discretion, without liability to End User, to update to provide new functionality or otherwise change the design of any Product or to discontinue the manufacture or sale of any Product. Vocera shall notify End User at least 90 days prior to the delivery of any Product which incorporates a change that adversely affects form, fit or function (“Material Change”). Vocera shall also notify End User at least 90 days prior to the discontinuance of manufacture of any Product. Notification will be made as soon as reasonably practical for changes associated with regulatory or health and safety issues.

  • Support Services Rehabilitation, counselling and EAP’s. Support is strictly non- punitive, and can be accessed at anytime (self-identification of the need for help is strongly encouraged).

  • Supply Price The Initial Term “Supply Price” for the “Monthly Fixed Price Volume” set forth on Exhibit A shall be $[______]/MWh for the first [***] years of the Initial Term, and thereafter shall be the then-current market price as mutually agreed by Customer and Supplier prior to the end of the [***] year. The Extension Term Supply Price, if any, will be the then-current market price as mutually agreed by Customer and Supplier prior to entering into the Extension Term. Supplier and Customer may agree to fix the Supply Price for one or more periods during the Term that individually and in total are shorter than the full Term. Exhibit A sets forth the hourly delivery volume for which the Energy Price will be fixed during each month of the Term to take into account the phase-in of the facility which is expected to progress at a rate of approximately [***]MW per month (the “Monthly Fixed Price Volume”). Supplier represents that Supplier has used commercially reasonable efforts to set such Supply Price at approximately [***]% discount to the forward price at which Supplier xxxxxx its delivery obligations under this Transaction Confirmation with respect to any financial or physical energy supply arrangement intended to cover the Monthly Fixed Price Volume, the settlement index (ERCOT North Load Zone), and this Transaction Confirmation term. The [***]% discount shall be revised to take into account any physical or software limitations originating from Customer and limiting Supplier’s ability to curtail 100% of the load at the Data Center. Exhibit A also sets forth the minimum load that Customer has designated as not subject to economic curtailment (“Non-Curtailable Load”), which represents, among other things, the Motor Control Center (MCC), and other essential server and administrative load. Customer and Supplier can, in the context of the immediately preceding sentence, agree on a lesser than [***]% discount with respect to the Supply Price to account for Supplier’s incremental cost of providing a fixed Supply Price for Non-Curtailable Load.

  • CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product Manufacturer/Developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (i) notify the Commissioner, each Licensee and each Authorized User then under contract for maintenance or technical support in writing of the intended discontinuance; and (ii) continue to offer Product or withdrawn support upon the Contract terms previously offered for the greater of: a) the best terms offered by Contractor to any other customer, or b) not less than twelve (12) months from the date of notice; and (iii) at Authorized User’s option, provided that the Authorized User is under contract for maintenance on the date of notice, either: provide the Authorized User with a Product replacement or migration path with at least equivalent functionality at no additional charge to enable Authorized User to continue use and maintenance of the Product. In the event that the Contractor is not the Product Manufacturer, Contractor shall be required to: (i) provide the notice required under the paragraph above, to the entities described within five (5) business days of Contractor receiving notice from the Product Manufacturer, and (ii) include in such notice the period of time from the date of notice that the Product Manufacturer will continue to provide Product or withdraw support. The provisions of this subdivision (a) shall not apply or eliminate Contractor’s obligations where withdrawn support is being provided by an independent Subcontractor. In the event that such Subcontractor ceases to provide service, Contractor shall be responsible for subcontracting such service, subject to state approval, to an alternate Subcontractor.

  • Product Quality (a) Tesoro warrants that all Products delivered under this Agreement or any Purchaser Order shall meet the latest applicable pipeline specifications or otherwise mutually agreed upon specifications for that Product upon receipt at the applicable Terminal and contain no deleterious substances or concentrations of any contaminants that may make it or its components commercially unacceptable in general industry application. Tesoro shall not deliver to any of the Terminals any Products which: (i) would in any way be injurious to any of the Terminals; (ii) would render any of the Terminals unfit for the proper storage of similar Products; (iii) would contaminate or otherwise downgrade the quality of the Products stored in commingled storage; (iv) may not be lawfully stored at the Terminals; or (v) otherwise do not meet applicable Product specifications for such Product that are customary in the location of the Terminal. If, however, there are Products that do not have such applicable specifications, the specifications shall be mutually agreed upon by the Parties. Should Tesoro’s commingled Products not meet or exceed the minimum quality standards set forth in this Agreement or any applicable Terminal Service Order, Tesoro shall be liable for all loss, damage and cost incurred thereby, including damage to Products of third parties commingled with Tesoro’s unfit Products. (b) TLO shall have the right to store compatible Products received for Tesoro’s account with Products belonging to TLO or third parties in TLO’s commingled storage tanks. TLO shall handle Tesoro’s fungible Products in accordance with TLO’s prevailing practices and procedures for handling such Products. The quality of all Products tendered into commingled storage for Tesoro’s account shall be verified either by Tesoro’s refinery analysis or supplier’s certification, such that Products so tendered shall meet TLO’s Product specifications. All costs for such analysis shall be borne solely by Tesoro. TLO shall have the right to sample any Product tendered to the Terminals hereunder. The cost of such sampling shall be borne solely by TLO. All Products returned to Tesoro shall meet or exceed Product specifications in effect on the date the Products are delivered to Tesoro. Notwithstanding any other provision herein, any and all Products that leave the Terminals shall meet all relevant ASTM, EPA, federal and state specifications, and shall not leave the Terminals in the form of a sub-octane grade Product. (c) TLO shall exercise reasonable care to ensure that all Products delivered by third parties into commingled storage with Tesoro’s Products meet applicable Product specifications for such Product that are customary in the location of the Terminal. In the event that Tesoro’s Products are commingled with third-party Products that do not meet or exceed the minimum quality standards set forth in this Agreement or any Terminal Service Order, TLO shall be liable for all loss, damage and cost incurred thereby.

  • Attachment A, Scope of Services The scope of services is amended as follows:

  • TAX SUPPORT SERVICES BNY Mellon shall provide the following tax support services for each Fund:  Provide various data and reports as agreed upon in the SLDs to support TRP’s tax reporting and tax filing obligations, including: · Wash sales reporting; · QDI reporting; · DRD reporting; · PFIC analysis; · Straddle analysis; · Paydown adjustments; · Equalization debit adjustments · Tax compliance under §851, §817(h); · Foreign bond sale analysis (§988); · Troubled debt analysis; · Estimation of income for excise tax purposes; · Swap analysis; · Inflation adjustments; · §1256 adjustments; · Market discount analysis; OID adjustments; · CPDI analysis; · Shareholder tax reporting information (e.g. FTC, UGG income, foreign source income by country, exempt income by state);  Provide data, and reports based on such data, maintained by BNY Mellon on its fund accounting platform as reasonably requested by TRP to support TRP’s obligations to comply with requests from tax authorities and TRP’s tax reporting and tax filing obligations.  Assist with other tax-related data needs as mutually agreed upon in writing from time-to-time.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!