Equipment Age/Condition Sample Clauses

Equipment Age/Condition. The Contractor shall use vehicles that meet model year 2010 or later federal emissions standards. Back-up vehicles used fewer than thirty (30) operating days per calendar year shall not be subject to the age and emission standards that apply to regularly-used vehicles, but shall be presentable, in safe working order, and shall be subject to all other conditions of this Section. The accumulated annual use of individual back- up vehicles shall be reported in the Contractor’s monthly report. All vehicles used in the performance of this Contract shall be maintained in a clean and sanitary manner, shall be thoroughly washed at least once every other week, and shall be repainted as necessary. All collection equipment shall have appropriate safety markings, including all highway lighting, flashing, and warning lights, clearance lights, and warning flags, all in accordance with current statutes, rules, and regulations. Equipment shall be maintained in good condition at all times. All parts and systems of the collection vehicles shall operate properly and be maintained in a condition satisfactory to the City. The Contractor shall maintain collection vehicles to ensure that no liquid wastes (such as Garbage or Compostables leachate) or oils (lubricating, hydraulic, or fuel) are discharged to Customer premises or City streets. Any equipment not meeting these standards shall not be used within the City until repairs are made. All liquid spills will be immediately cleaned to the City’s and Customer’s satisfaction. Unremediated spills and failure to repair vehicle leaks shall be subject to performance fees as provided in Section 4.1 herein. All collection vehicles shall be labeled with signs on both the front and driver’s side door and the rear of the vehicle that clearly indicate the vehicle inventory number. The Customer service telephone number shall be labeled on the side of the vehicle. Signs shall use lettering not less than four (4) inches high and shall be clearly visible from a minimum distance of twenty (20) feet. Signs, sign locations, and the telephone number shall be subject to approval by the City. No advertising shall be allowed on Contractor vehicles other than the Contractor’s name, logo, and Customer service telephone number and website address. Special promotional messages may be permitted upon the City’s prior written approval. In addition, any vehicle regularly used in the City shall include a placard clearly visible at the rear of the vehicle. This...
Sample 1
AutoNDA by SimpleDocs
Equipment Age/Condition. The Contractor shall use compressed natural gas (CNG) powered vehicles for all commercial, residential, roll-off and route manager vehicles, and hybrid electric-biodiesel powered vehicles for limited access and delivery vehicles in the performance of the Contract. Residential collection vehicles shall also incorporate hydraulic launch assist technology, or other technology providing similar fleet efficiencies, upon prior written authorization by the City. Additional fleet provisions shall be incorporated as described in the Contractor’s proposal pursuant to Section
Sample 1

Related to Equipment Age/Condition

  • Contract Conditions This section contains conditions which shall be complied with during the performance of this contract. The conditions come in two parts, general conditions and special contract requirements.

  • Safe Conditions Whenever an employee reports a condition which the employee feels represents a violation of safety or health rules and regulations or which is an unreasonable hazard to persons or property, such conditions shall be promptly investigated. The appropriate administrator shall reply to the concern, in writing, if the employee's concern is communicated in writing.

  • PROJECT CONDITIONS A. The Grantee agrees to the following Project Conditions:

  • Space Conditions All pipes passing through floors, walls, and ceilings shall be installed with sufficient space between them to permit installation of pipe insulation and floor, wall, and ceiling plates without cutting of insulation or plates. Roughed-in dimensions shall be prepared by the Contractor to accomplish this requirement. The Contractor shall locate all equipment that must be serviced, operated, or maintained in fully accessible positions. This provision includes but is not limited to valves, traps, cleanouts, motors, controllers, switchgear, drain points, filter, access doors, and fire dampers. If spaces, dimensions, or other design conditions do not permit compliance with the present article, the Contractor shall file a request in writing with the Design Professional for additional instructions, furnishing a copy to the Owner.

  • Unsafe Conditions In accordance with 29 CFR § 1977, occasions might arise when an employee is confronted with a choice between not performing assigned tasks or subjecting himself/herself to serious injury or death arising from a hazardous condition at the workplace. If the employee, with no reasonable alternative, refuses in good faith to expose himself/herself to the dangerous condition, he/she would be protected against subsequent discrimination. The condition causing the employee's apprehension of death or injury must be of such a nature that a reasonable person, under the circumstances then confronting the employee, would conclude that there is a real danger of death or serious injury and that there is insufficient time, due to the urgency of the situation, to eliminate the danger by resorting to regular statutory enforcement channels. In addition, in such circumstances, the employee, where possible, must also have sought from his Employer, and been unable to obtain, a correction of the dangerous condition.

  • Site Conditions A. Existing Site Conditions: Information with respect to the site of the Work given in drawings or specifications has been obtained by County's representatives and is believed to be reasonably correct, but the County does not warrant either the completeness or accuracy of such information, and it is the responsibility of the Contractor to verify all such information.

  • ADDITIONAL SPECIAL CONTRACT CONDITIONS A. Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:

  • Service Conditions Customer acknowledges that in the event of a service issue, Customer is responsible for on-site cooperative testing with LightEdge Technical Support to assist in the diagnosis of the trouble. Customer agrees to be bound to current terms of LightEdge Acceptable Use Policy. Terms of the Acceptable Use Policy are subject to change without notice. Current Acceptable Use Policy can be found here: xxxx://xxx.xxxxxxxxx.xxx/legal Customer agrees that any service complaints including concerns regarding level of support, products, service reliability, or any other concerns related to LightEdge or Services being provided by LIghtEdge will be communicated to LightEdge by sending an email to xx@xxxxxxxxx.xxx.

  • Room Condition The university agrees to provide and the resident agrees to maintain the assigned room and all public areas in and around the immediate building(s) accessible to the resident in a clean, safe and sanitary condition. Upon termination of this agreement, the student should leave the assigned room, its furnishings, and its equipment in as good an order and condition as the same were upon commencement of the student’s occupancy, ordinary wear and tear excepted. University staff will complete an inventory of furnishings and an assessment of damages; charges will be assessed to the responsible individual(s). Personal property left in a room following the termination of occupancy will be deemed abandoned. Students will be charged for the removal of such property.

  • BASIC CONDITIONS The State shall have no obligation to disburse money for the Project under this Grant Agreement until the Grantee has satisfied the following conditions:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!