Export Limits Sample Clauses

Export Limits. You shall comply with all export laws and restrictions and regulations of the Department of Commerce, the United States Department of Treasury Office of Foreign Assets Control (“OFAC”), or other United States or foreign agency or authority, and shall not export, or allow the export or re-export of the Software in violation of any such restrictions, laws or regulations. By downloading or using the Software, you agree to the foregoing and represent and warrant that you are not located in, under the control of, or a national or resident of any restricted country or on any such list.
Sample 1Sample 2Sample 3See All (15)
Export Limits. None of the Software or underlying information or technology may be downloaded or otherwise exported or re-exported: (a) into (or to a national or resident of) any country to which the United States has embargoed goods; or (b) to anyone on the U.S. Treasury Department’s list of Specially Designated Nationals or the U.S. Commerce Department’s Table of Deny Orders. The Software and any underlying technology may not be exported outside the United States or to any foreign entity or “foreign person” as defined by U.S. government regulations, including without limitation, anyone who is not a citizen, national, or lawful permanent resident of the United States.
Sample 1Sample 2
Export Limits. None of the software or underlying information or technology may be downloaded or otherwise exported or re-exported (a) into (or to a national or resident of) any country to which the United States has embargoed goods, or (b) to anyone on the U.S. Treasury Department's list of Specially Designated Nationals or the U.S.
Sample 1
Export Limits. No Sugar covered by the Agreement, whether exported directly or indirectly from Mexico, shall be entered into the United States unless, when cumulated with all prior entries of Sugar exported from Mexico during the Export Limit Period in which the Sugar was exported, it does not exceed the applicable Export Limit set forth below. All exports of Sugar from Mexico that enter the United States will be counted against the Export Limit established for the applicable Export Limit Period. A. The Export Limit for the Initial Export Limit Period shall be calculated using the formula provided in Section V.B, beginning with the December allocation in Section V.B.2. The restriction in Section V.C.2 below shall apply, and the March allocation in Section V.B.3 applies. B. The Export Limit for each Subsequent Export Limit Period will be seventy (70) percent of the Target Quantity of U.S. Needs as calculated based on the July WASDE preceding the beginning of the Export Limit Period. The Export Limit will be effective October 1. The Export Limit may be increased in the following manner: 1. In September of each Subsequent Export Limit Period, the Department will determine if there is a need for additional Sugar in the U.S. market beyond the Export Limit calculated in July. The Department will calculate the Target Quantity of U.S. Needs based on information in the September WASDE. Effective October 1, the Export Limit shall be revised to equal seventy (70) percent of the Target Quantity of U.S. Needs, unless that amount is less than or equal to the Export Limit announced in July, in which case the Export Limit shall not change. 2. In December of each Subsequent Export Limit Period, the Department will determine if there is a need for additional Sugar in the U.S. market beyond the Export Limit calculated in September. The Department will calculate the Target Quantity of U.S. Needs based on information in the December WASDE. Effective January 1, the Export Limit shall be revised to equal eighty (80) percent of the Target Quantity of U.S. Needs, unless that amount is less than or equal to the Export Limit announced in September, in which case the Export Limit shall not change. 3. In March of each Subsequent Export Limit Period, the Department will determine if there is a need for additional Sugar in the U.S. market beyond the Export Limit calculated in December. The Department will calculate the Target Quantity of U.S. Needs based on information in the March WASDE. Effective Ap...
Sample 1Sample 2
Export Limits. (a) Subject to clause 7.2(b), your micro embedded generating unit is subject to the static export limit set out in your connection offer letter. The static export limit is equal to the maximum amount of electricity (up to a maximum of 5 kW per phase) your micro embedded generating unit is approved by us to export onto our distribution system. (b) Your connection offer letter may state that your micro embedded generating unit is subject to a low static export limit. The low static export limit is equal to the maximum amount of electricity (up to a maximum of 1 kW per phase) your micro embedded generating unit is approved by us to export onto our distribution system. The low static export limit will apply to your micro embedded generating unit: (i) at your request; (ii) if your inverter is unable to remotely interface with our utility server via the internet; or (iii) if your micro embedded generating unit cannot connect to the internet, or you chose not to connect it to the internet. (c) We may limit the maximum amount of electricity your micro embedded generating unit may export to our distribution system to the default limit: (i) for a period not exceeding 10 business days from the: (1) date this agreement starts; or (2) date we verify the connection of your micro embedded generating unit to our distribution system, so we can integrate your micro embedded generating unit into our export algorithm; or (ii) if your inverter does not receive DER instructions; or (iii) if your inverter does not respond to our DER instructions. (d) To the extent the relevant basic micro EG connection service permits the export of electricity onto our distribution system, this permission is not a representation by us or a guarantee from us that any micro embedded generating unit on your side of the connection point will, at all times: (i) generate electricity for your use at the premises; or (ii) be able to export generated electricity into our distribution system.
Sample 1
Export Limits. A. No Cold-Rolled Steel covered by this Agreement, whether exported directly or indirectly from Russia, shall be entered into the United States unless, when cumulated with all prior entries of Cold-Rolled Steel exported from Russia during the Export Limit Period in which that Cold-Rolled Steel was exported, it does not exceed the export limits set forth below. 1. The export limit for the Initial Export Limit Period (January 1, 2000, to December 31, 2000) shall be 340,000 metric tons of Cold-Rolled Steel. 2. The export limit for each subsequent Export Limit Period will be adjusted by: a. First, the export limit for the previous Export Limit Period shall be increased by three per cent of that export limit; b. Second, the number obtained under paragraph (a) shall be increased or decreased by the result of multiplying the export limit for the previous Export Limit Period by the percent change (up to three percent) in apparent U.S. domestic consumption of Cold-Rolled Steel during the most recent 12 months for which data are available at the time the DOC makes this calculation, compared to the previous 12 months (as described in Appendix IV). 3. DOC shall determine export limits for each Subsequent Export Limit Period no later than 60 days prior to the beginning of that Export Limit Period. B. When Cold-Rolled Steel is imported into the United States and is subsequently re-exported, or re-packaged and re-exported, or further processed (but still covered by this Agreement) and re-exported, the amount re-exported shall be deducted from the amounts of exports that have been counted against the export limit for the Export Limit Period in which the re-export takes place. The deduction will be applied only after DOC has received, and has had the opportunity to verify, evidence demonstrating the original importation, any repackaging or further processing, and subsequent exportation. C. MOT will not issue Export Licenses authorizing the exportation to the United States of Cold-Rolled Steel covered by this Agreement in any half of any Export Limit Period that exceeds 60 percent of the export limit for that Export Limit Period. D. Notwithstanding any other provision of this Agreement, except Paragraph IV.B., up to 15 per cent of the export limit for any Export Limit Period may be carried over to the Subsequent Export Limit Period and up to 15 per cent of the export limit for any Export Limit Period may be carried back to the last 60 days of the previous Export Limit Perio...
Sample 1
Export Limits. None of the Software or underlying information or technology may be downloaded or otherwise exported or re-exported.
Sample 1
Export Limits 
Sample 1

Related to Export Limits

  • Export Laws The Software, including Documentation, is subject to U.S. export control laws, including the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other countries. Licensee will comply strictly with all regulations and has the responsibility to obtain any licenses required to export, re-export, or import Software or Documentation.

  • Export/Import 14.1 The Works (including, without limitation, any Software) may be subject to the export or import laws and regulations of: 14.1.1 the United States, including without limitation the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Parts 120-130), the U.S. Export Administration Regulations (15 C.F.R. Parts 730-774), and the economic and trade sanctions administered by the U.S. Department of Treasury Office of Foreign Assets Control; 14.1.2 the European Union and its member states, including without limitation Council Regulation (EC) No. 1334/2000; and 14.1.3 other countries (collectively, “Export/Import Law”). Buyer agrees to comply strictly with all Export/Import Laws applicable to the Works. Buyer shall promptly notify Supplier of any authorisation requirements under Export/Import Laws that may apply to delivery of the Works to Buyer site(s). Buyer acknowledges and agrees that the Works shall not be exported, re-exported, trans-shipped or otherwise transferred to Cuba, Iran, North Korea, Syria, Sudan, or any other countries for which the United States and/or the European Union maintains an embargo (collectively, "Embargoed Countries"), or a national or resident thereof, or to any person or entity on the U.S. Department of Treasury List of Specially Designated Nationals, the U.S. Department of Commerce Denied Parties or Entity List, or to any person on any comparable list maintained by the European Union or its member states (collectively, "Denied or Restricted Parties"). The lists of Embargoed Countries and Denied or Restricted Parties are subject to change without notice. Buyer represents and warrants that neither it nor any of their customers or their users is located in, a national or resident of, or under the control of an Embargoed Country or similarly Denied or Restricted Party. Buyer specifically shall obtain all required authorizations from the U.S. (or EU as applicable) Government before transferring or otherwise disclosing technical data or technology (as those terms are defined in 22 C.F.R. § 120.10 and 15 C.F.R. § 722, respectively), to any Foreign Person (as defined in 22 C.F.R. § 120.16). 14.2 Registration In accordance with 22 C.F.R. Part 122, any person who engages in the United States in the business of either manufacturing or exporting defense articles or furnishing defense services is required to register with the U.S. State Department’s Directorate of Defense Trade controls. Engaging in the business of manufacturing or exporting defense articles or furnishing defense services requires only one occasion of manufacturing or exporting a defense article or furnishing defense services. Manufacturers who do not engage in exporting must nevertheless register. 14.3 Acceptance of these terms and conditions certifies to the Supplier that the Buyer is in compliance with 22 C.F.R. Part 120 as required and the Buyer’s registration will remain valid during the terms of this agreement. 14.4 Further to acceptance, the Buyer further certifies it: 14.4.1 Understands its obligation to protect EAR or ITAR controlled Goods and Services as data as necessary from unauthorized disclosure or access to foreign person employees or visitors. 14.4.2 In the performance of the contract, the Buyer understands its obligation to determine whether it will require the use of third party subcontractors to access any technical data, Goods and Services. If required, the Buyer is responsible for identifying and licensing any activity that requires export authorization from the Department of Commerce, Bureau of Industry and Security or the Department of State, Directorate of Defense Trade Controls. 14.5 The Goods shall not be resold or exported to countries specified in the Country Guidance Chart which can be found at xxxx://xxx.xxxxxx.xxx/about-cobham/aerospace-and-security/about- us/useful-information.aspx without prior written approval of Supplier.

  • Export Controls Both Parties will adhere to all applicable laws, regulations and rules relating to the export of technical data and will not export or re-export any technical data, any products received from the other Party or the direct product of such technical data to any proscribed country listed in such applicable laws, regulations and rules unless properly authorized.

  • Export Compliance The Services, Content, other technology We make available, and derivatives thereof may be subject to export laws and regulations of the United States and other jurisdictions. Each party represents that it is not named on any U.S. government denied-party list. You shall not permit Users to access or use any Service or Content in a U.S.-embargoed country (currently Cuba, Iran, North Korea, Sudan or Syria) or in violation of any U.S. export law or regulation.

  • Export 12.1 Export laws and regulations of the United States and any other relevant local export laws and regulations apply to the Services. Such export laws govern use of the Services (including technical data) and any Services deliverables provided under this Agreement, and You and we each agree to comply with all such export laws and regulations (including “deemed export” and “deemed re-export” regulations). You agree that no data, information, software programs and/or materials resulting from the Services (or direct product thereof) will be exported, directly or indirectly, in violation of these laws, or will be used for any purpose prohibited by these laws including, without limitation, nuclear, chemical, or biological weapons proliferation, or development of missile technology. 12.2 You acknowledge that the Services are designed with capabilities for You and Your Users to access the Services without regard to geographic location and to transfer or otherwise move Your Content between the Services and other locations such as User workstations. You are solely responsible for the authorization and management of User accounts across geographic locations, as well as export control and geographic transfer of Your Content.

  • Export Control Compliance User acknowledges that Center is an open laboratory for fundamental research that has many foreign persons as its employees and students. User understands and agrees that under no circumstances will User bring export control-listed items, or unpublished software source code or technical information in the form of defense articles or technical data regulated by the International Traffic in Arms Regulations (ITAR), to Center. Use of Center or facilities for activity subject to the ITAR, including the development, assembly or fabrication of defense articles identified on the US Munitions List, is prohibited.

  • Export Control Laws LICENSEE shall observe all applicable United States and foreign laws with respect to the transfer of Licensed Products and related technical data to foreign countries, including, without limitation, the International Traffic in Arms Regulations and the Export Administration Regulations.

  • Export Control This Agreement is made subject to any restrictions concerning the export of products or technical information from the United States or other countries that may be imposed on the Parties from time to time. Each Party agrees that it will not export, directly or indirectly, any technical information acquired from the other Party under this Agreement or any products using such technical information to a location or in a manner that at the time of export requires an export license or other governmental approval, without first obtaining the written consent to do so from the appropriate agency or other governmental entity in accordance with Applicable Law.

  • Export Law Assurances You are responsible for complying with all trade regulations and laws both foreign and domestic. You acknowledge that this Software may only be exported or re-exported in accordance with U.S. Government Export Administration Regulations. Without authorization from the U.S. Government, You may not export or re-export the Software (i) to any prohibited country, person, entity, or end-user as specified by U.S. export controls or (ii) for use in the design, development or production of nuclear, chemical, or biological weapons, or missile technology, or any other prohibited use. You warrant and represent that neither the Bureau of Export Administration of the U.S. Commerce Department not any other U.S. Government entity or agency has suspended, revoked or denied, in whole or in part, Your export privileges. For current information on U.S. export requirements and restrictions visit xxx.xxx.xxx.xxx/.

  • Import and Export Compliance In connection with this Agreement, each party will comply with all applicable import, re-import, export, and re-export control laws and regulations, including the Export Administration Regulations, the International Traffic in Arms Regulations, and country-specific economic sanctions programs implemented by the Office of Foreign Assets Control. For clarity, Client agrees to be solely responsible for compliance related to the manner in which Client chooses to use the Services, including Client’s transfer and processing of content and the provision of such content to others.

Most Referenced Clauses

Most Referenced Definitions