KEY AND LOCK CONTROL Sample Clauses

KEY AND LOCK CONTROL. This Detention Standard maintains facility safety and security by requiring that keys and locks be properly controlled and maintained. Components Meets Standard Does Not Meet Standard N/A Remarks 14. The operational keyboard sufficient to accommodate all the facility key rings including keys in use is located in a secure area. Facility uses the 'Key Watcher' system. The key system is sufficient to accommodate all the key rings and is located in the Control Center. 15. Procedures in place to ensure that key rings are: • Identifiable • Numbers of keys on the ring are cited? • Keys cannot be removed from issued key rings (b)(7)e Keys are identifiable, the number of keys is cited on a key chit, and keys cannot be removed from issued key rings. 16. Emergency keys are available for all areas of the facility. Emergency keys are stored in the (b)(7)e 17. The facility uses a key accountability system. 18. Authorization is necessary to issue any restricted key. A written form must be completed and signed by authorized ICE staff prior to issuance of a restricted key. There are(b)(7)(e)gun lockers located in areas with constant officer observation. Areas are not accessible to detainees or the public. 19. Individual gun lockers are provided. • They are located in an area that permits constant officer observation. • In an area that does not allow detainee or public access. 20. The facility has a key accountability policy and procedures to ensure key accountability. The keys are physically counted daily. Keys are counted on each shift and documented on the shift report. 21. All staff members are trained and held responsible for adhering to proper procedures for the handling of keys. • Issued keys are returned immediately in the event an employee inadvertently carries a key ring home. • When a key or key ring is lost, misplaced, or not accounted for, the shift supervisor is immediately notified. • Detainees are not permitted to handle keys assigned to staff. Training files were reviewed. Staff is trained with a curriculum approved by the Facility Operations Manager and Locksmith. 22. Locks and locking devices are continually inspected, maintained, and inventoried. 23. Each facility has the position of Security Officer. If not, a staff member appointed the collateral duties of security officer. 24. The designated key control officer is the only employee who is authorized to add or remove a key from a ring.
Sample 1See All (5)
AutoNDA by SimpleDocs
KEY AND LOCK CONTROL. This Detention Standard maintains facility safety and security by requiring that keys and locks be properly controlled and maintained. Components Meets Standard Does Not Meet Standard N/A Remarks
Sample 1
KEY AND LOCK CONTROL. The contractor shall establish and implement methods of ensuring all keys/key cards issued are not lost or misplaced and are not used by unauthorized persons. NOTE: All references to keys include key cards. No keys issued shall be duplicated. The contractor shall include procedures covering key control in the Quality Control Program (QCP). Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The contractor shall immediately report any occurrences of lost or duplicated keys/key cards to the COR. In the event keys, other than master keys, are lost or duplicated, the contractor shall, upon direction by the COR, re- key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the contractor. The contactor shall prohibit the use of keys/key cards by any persons other than the contractor’s employees and individuals designated by the Government. The contractor shall establish and implement methods to ensure lock combinations are not revealed to unauthorized persons. The contractor shall ensure that lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations. These procedures shall be included in the contractors QCP.
Sample 1
KEY AND LOCK CONTROL. This Detention Standard maintains facility safety and security by requiring that keys and locks be properly controlled and maintained. Components Meets Standard Does Not Meet Standard N/A Remarks 15. Procedures in place to ensure that key rings are: • Identifiable • Numbers of keys on the ring are cited? • Keys cannot be removed from issued key rings Policies and procedures are in place to ensure that keys rings are identifiable, number of keys on the ring are cited, and keys cannot be removed from issued key rings without a special tool. Visual examination of key rings indicated compliance.
Sample 1
KEY AND LOCK CONTROL. This Detention Standard maintains facility safety and security by requiring that keys and locks be properly controlled and maintained. Components Meets Standard Does Not Meet Standard N/A Remarks 24. The designated key control officer is the only employee who is authorized to add or remove a key from a ring. 25. The splitting of key rings into separate rings is not authorized. Key rings are permanently connected and cannot be split.
Sample 1
KEY AND LOCK CONTROL. This paragraph will address control of any key(s) and lock(s) used to secure any SIDA/Non-SIDA access points when unattended. The following are sample statements to be used as they apply.
Sample 1

Related to KEY AND LOCK CONTROL

  • Gaming, betting and lotteries The Hirer shall ensure that nothing is done on or in relation to the premises in contravention of the law relating to gaming, betting and lotteries.

  • STRIKE AND LOCKOUT During the term of this Agreement there shall be no lockout by the Company, and no strike, stoppage of work, or slow-down, either partial or general, authorized by the Union.

  • Keys and Locks Landlord will furnish Tenant, free of charge, two keys to each door or lock in the Premises. Landlord may make a reasonable charge for any additional or replacement keys. Tenant will not duplicate any keys, alter any locks or install any new or additional lock or bolt on any door of its Premises or on any other part of the Building without the prior written consent of Landlord and, in any event, Tenant will provide Landlord with a key for any such lock. On the termination of the Lease, Tenant will deliver to Landlord all keys to any locks or doors in the Building which have been obtained by Tenant.

  • Input Control The possibility to subsequently verify and determine whether, and by whom, personal data was entered into, changed or removed from data processing systems must be ensured. • Definition of entry authorisation • Logging of logins

  • BOARD AND LODGING (While fighting Company Responsibility Fires) a) Employees who commute from home or camp are expected to ‘carry a lunch’. Additional meals where required will be at Company expense. b) Employees required to live away from their private residence will receive board and lodging at Company expense. c) Employees living in fly camps will receive board and lodging at Company expense.

  • Log and Load Reporting Service This contract may at the States discretion, require the services of a State approved third party log and load reporting service. Purchaser shall ensure log volume measurement, weight, or scale and weight data for each load is received by the log and load reporting service within 1 business day of logs being measured or weighed. If during the term of this contract, the State discontinues use of the Log and Load Reporting Service, the State will notify the Purchaser in writing, and will approve an alternative log and load reporting process. Determination of volume and grade of any forest products shall be conducted by a state approved third party scaling organization and in accordance with the Westside log scaling and grading rules and Xxxxxxxx Volume Table, revised July 1, 1972, contained in the Northwest Log Rules Eastside and Westside Log Scaling Handbook (developed and produced by the Northwest Log Rules Advisory Group) and in effect on the date of confirmation of this contract. Special scaling specifications shall be noted on the State’s Brand Designation form which is hereby incorporated to this contract by reference. Forest Product measurement and weighing facilities required by this contract must be approved by the State. Forest products sold under the contract which require log scaling shall be scaled, measured, or counted by a State approved third party log scaling organization. Forest products sold under the contract which require weighing shall be weighed at a location that meets Washington State Department of Agriculture approval. Prior to forest products being hauled, the Contract Administrator must authorize in writing the use of State approved measurement and/or weighing facilities that are at or en-route to final destinations. Forest products from this sale shall be measured or weighed at facilities, which are currently approved for use by the State and are currently authorized for this sale. The State reserves the right to verify load volume and weights with State employees or contractors at the State's own expense. The State reserves the right to revoke the authorization of previously approved measurement locations.

  • Allocations Between Transferor and Transferee If a Partner transfers any part or all of its Partnership Interest, the distributive shares of the various items of Profit and Loss allocable among the Partners during such fiscal year of the Partnership shall be allocated between the transferor and the transferee Partner either (i) as if the Partnership’s fiscal year had ended on the date of the transfer, or (ii) based on the number of days of such fiscal year that each was a Partner without regard to the results of Partnership activities in the respective portions of such fiscal year in which the transferor and the transferee were Partners. The General Partner, in its sole and absolute discretion, shall determine which method shall be used to allocate the distributive shares of the various items of Profit and Loss between the transferor and the transferee Partner.

  • Data Input Control It will be possible to retrospectively examine and establish whether and by whom Personal Data have been entered, modified or removed from SAP data processing systems.

  • Separate Central and Local Terms The collective agreement shall consist of two parts. Part “A” shall comprise those terms which are central terms. Part “B” shall comprise those terms which are local terms.

  • TRANSFER AND SUB-CONTRACTING 31.1 This Framework Agreement is personal to the Supplier and the Supplier shall not assign, novate or otherwise dispose of or create any trust in relation to any or all rights and obligations under this Framework Agreement or any part thereof without the Approval. 31.2 Notwithstanding the provisions of Clause 31.1 above, the Supplier shall be entitled to Sub-Contract its obligations to supply the Services to those Sub-Contractors listed in Framework Agreement Schedule 2 (Sub-Contractors). The Supplier shall ensure that terms are included in any Sub-Contract permitted under this Framework Agreement which: 31.2.1 require the Supplier to pay any undisputed sum due to the relevant Sub-Contractor within a specified period that does not exceed thirty (30) calendar days from the date the Supplier receives the Sub-Contractor's invoice; and 31.2.2 prohibit the Sub-Contractor from further sub-contracting any element of the service provided to the Supplier without Approval. 31.3 The Supplier shall not substitute or remove a Sub-Contractor or appoint an additional sub-contractor without Approval, such Approval not be unreasonably withheld or delayed. Such consent shall not constitute approval or endorsement of such substitute or additional sub-contractor and the Supplier shall remain responsible for the provision of the Ordered Services at all times. 31.4 The Authority may require the Supplier to terminate a Sub-Contract where it considers that: 31.4.1 the Sub-Contractor may prejudice the provision of the Services or may be acting contrary to the interests of the Authority; 31.4.2 the Sub-Contractor is considered to be unreliable and/or has not provided reasonable services to its other customers; and/or 31.4.3 the Sub-Contractor employs unfit persons; 31.5 In the event that the Authority exercises its right pursuant to Clause 31.4 above, the Supplier shall remain responsible for maintaining the provision of the Services. 31.6 Despite any permitted Sub-Contract pursuant to this Clause 31, the Supplier at all times shall remain responsible for all acts and omissions of its Sub-Contractors and the acts and omissions of those employed or engaged by the Sub-Contractors as if they were its own. An obligation on the Supplier to do, or refrain from doing, any act or thing shall include an obligation upon the Supplier to procure that its employees, staff, agents and the Sub-Contractors', employees, staff and agents also do, or refrain from doing, such act or thing. 31.7 The Authority shall be entitled to: 31.7.1 assign, novate or otherwise dispose of its rights and obligations under this Framework Agreement or any part thereof to any Other Contracting Body; or 31.7.2 novate, transfer or otherwise dispose of its rights and obligations under this Framework Agreement to any other body (including any private sector body) which substantially performs any of the functions that previously had been performed by the Authority. 31.8 The Supplier shall enter into such agreement and/or deed as the Authority shall reasonably require so as to give effect to any assignment, novation, transfer or disposal made pursuant to Clause 31.7 above.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!