Maintenance Department Vacations Sample Clauses

Maintenance Department Vacations. It is agreed that for the duration of this Collective Agreement, the Steelmaking Maintenance Department will be recognized as operating as two crews and the Rolling Mill Maintenance Department will be recognized as operating as two crews. As such, at least two people from each crew in each Trade and Craft will be allowed to take vacations at the same time, except where there are less than seven (7) employees in a Trade and Craft group, in which case, at least one (1) employee from each crew in each Trade and Craft shall be allowed to take vacation at any one time. Where there are less than seven (7) Janitors, at least one (1) employee shall be allowed to take vacation at any one time. For purposes of scheduling vacations in the Stores Department, it is recognized that the positions of Storesman and Receiver are separate; therefore, the Receiver is not to be included in the count of Storesmen. As such, where there are less than seven (7) Storesmen, at least one (1) employee shall be allowed to take vacation at any one time. Vacations shall be based upon plant seniority, where any conflict of vacation dates shall be decided on plant seniority depending upon the sequential number list. The exception to the above is for the period beginning one week prior to the summer shutdown to and including one week after the summer shutdown, to a maximum of four weeks, when at least one person per Trade and Craft from each Department will be granted vacation.
AutoNDA by SimpleDocs
Maintenance Department Vacations. Maintenance Department employee’s vacations shall be arranged in each Trade or Craft group, Utilities or Stores, among employees reporting to a crew supervisor, and shall be based upon plant seniority. Any conflict of vacation dates shall be decided on plant seniority depending upon the sequential number list. During the weeks commencing one week prior to the departmental maintenance shutdowns, and concluding one week after the shutdowns at least one (1) employee per shift in the groups stated above shall be allowed vacation. Outside the departmental shutdown stated above at least two (2) employees per shift in the groups as stated above, will be allowed to take vacations, and further numbers will be decided, upon work requirements for each particular group.
Maintenance Department Vacations. It is agreed that for the duration of this Collective Agreement, the Steelmaking Maintenance Department will be recognized as operating as two crews and the Rolling Mill Maintenance Department will be recognized as operating as two crews. As such, at least two people from each crew in each Trade and Craft will be allowed to take vacations at the same time, except where there are less than seven (7) employees in a Trade and Craft group, in which case, at least one (1) employee from each crew in each Trade and Craft shall be allowed to take vacation at any one time. Where there are less than seven
Maintenance Department Vacations. Maintain Facility Teams (MFT) will be responsible for administering the vacation process. Their goal is to best accommodate MFT member needs while providing adequate technical coverage. IM Vacation MFT’s: 12 IEM Vacation MFT’s: 12 92 & 00 00 & 00 00 & 000 00 & 104 431 431 36 MFT 122 MFT 122 Hoisting & Mechanic 62 62 2. 12 prime vacation weeks will be designated each year as follows;

Related to Maintenance Department Vacations

  • Scheduling Vacations Vacations are to be scheduled in advance and taken at such reasonable times as approved by the employee's department with particular regard to the needs of the Employer, seniority of employee, and, insofar as practicable, with regard to the wishes of the employee. No vacation shall be assigned by the Employer or deducted from the employee's account as disciplinary action.

  • Personnel, Office Space, and Facilities of Manager The Manager at its own expense shall furnish or provide and pay the cost of such office space, office equipment, office personnel, and office services as the Manager requires in the performance of its investment advisory and other obligations under this Agreement.

  • Office Visits (other than Preventive Care Services) This plan covers office and clinic visits to diagnose or treat a sickness or injury. Office visit copayments differ depending on the type of provider you see. This plan covers physician visits in your home if you have an injury or illness that: • confines you to your home; or • requires special transportation; and • because of this injury or illness, you are physically unable to travel to the provider’s

  • Planned Maintenance (a) Subject to any modification or amendment of this Agreement made pursuant to Section 4.2(c) or Section 7.3(d), Planned Maintenance occurring during the Delivery Term shall be coordinated and scheduled in accordance with this Section 9.6. Seller shall perform all Planned Maintenance (including Major Planned Maintenance) in a manner that optimizes the generation and benefits to Buyer of the Contract Energy, Storage Energy, and other Products (e.g., during off-peak periods and low-irradiance periods) and, without limiting the foregoing, either (i) outside of Daylight Hours or (ii) during the months of October and November only, during Daylight Hours; provided, however, that the foregoing restrictions shall not apply to any Planned Maintenance that Seller is required to perform pursuant to any applicable manufacturer warranty that cannot reasonably be performed by Seller subject to such restrictions. (b) Seller shall deliver to Buyer a proposed schedule for Planned Maintenance in respect of each Contract Year (“Planned Maintenance Schedule”) no later than ninety (90) Days before the start of such Contract Year. Planned Maintenance Schedules submitted by Seller shall (i) comply with the second sentence of Section 9.6(a) and (ii) include reasonably detailed descriptions of the Planned Maintenance to be performed, the Days and times in which each type of Planned Maintenance is scheduled to be performed, the estimated amount(s) of Contract Capacity and Storage Capacity that will be unavailable due to Planned Maintenance and the total number of hours that Seller expects that the Contract Capacity and Storage Capacity will be unavailable due to Planned Maintenance. The general form for the Planned Maintenance Schedule is set forth in Schedule 9.6. (The Planned Maintenance descriptions reflected in the general form set forth in Schedule 9.6 are provided for indicative purposes only, and are not necessarily representative of the detail, time periods, or certainty required for a Planned Maintenance Schedule hereunder.) (c) Buyer shall have the right to disapprove, in its reasonable discretion (provided that Buyer shall have the right to disapprove, in its sole and absolute discretion, any Planned Maintenance proposed by Seller that is inconsistent with the terms of this Agreement), any Planned Maintenance set out in any Planned Maintenance Schedule proposed by Seller for any Contract Year, except for any Planned Maintenance that (i) is scheduled to occur outside of Daylight Hours or during Daylight Hours during the months of October and November or (ii) Seller is required to perform pursuant to any applicable manufacturer warranty and that is scheduled to occur in compliance with Section 9.6(a). If Seller submits its Planned Maintenance Schedule for a Contract Year in accordance with the requirements of this Agreement and Buyer does not disapprove of any Planned Maintenance set out in such Planned Maintenance Schedule by sixty (60) days after submission, then such Planned Maintenance Schedule shall be deemed approved. If Buyer, in the exercise of its discretion as set forth above, disapproves any Planned Maintenance in such Planned Maintenance Schedule within the applicable time period specified above after its submission, Buyer shall notify Seller and the Parties shall use Commercially Reasonable Efforts to agree upon and finalize a mutually acceptable Planned Maintenance Schedule for the applicable Contract Year. Seller shall conduct Planned Maintenance during such Contract Year only in accordance with an agreed Planned Maintenance Schedule; provided, however, that Seller may (A) move Planned Maintenance included in an agreed Planned Maintenance Schedule that is not Major Planned Maintenance, so long as such move is consistent with the terms of this Agreement (including the second sentence of Section 9.6(a)) or, with respect to Major Planned Maintenance, if such Major Planned Maintenance is scheduled to occur outside of Daylight Hours or during Daylight Hours during the months of October and November and (B) schedule and perform Planned Maintenance not reflected in the Planned Maintenance Schedule so long as such Planned Maintenance is scheduled to be performed outside of Daylight Hours or during Daylight Hours during the months of October and November and Seller provides Buyer at least two (2) weeks’ prior written notice of such Planned Maintenance; provided further that Buyer shall have the right to advise Seller of periods when Buyer prefers, based on solar irradiance, supply, market and other conditions, that any Major Planned Maintenance be deferred, and Seller shall use Commercially Reasonable Efforts to comply with such request. (d) Seller shall use Commercially Reasonable Efforts to complete any Planned Maintenance and place the Facility back into full commercial operation as soon as reasonably possible. If Seller determines that any Planned Maintenance scheduled in an agreed Planned Maintenance Schedule no longer needs to be completed or will not consume the entire time scheduled therefor in the agreed Planned Maintenance Schedule, Seller shall provide (i) a Generation Forecast to Buyer reflecting the forecasted amount of Delivered Energy during each affected interval that takes into account such change and (ii) in the case of any Major Planned Maintenance, a written notice declaring the cessation and termination of the applicable Major Planned Maintenance period (in which event, the Major Planned Maintenance period shall terminate in accordance with the terms of such Generation Forecast and written notice).

  • Maintenance Employees The normal hours of work for full-time Maintenance employees are 72 ½ hours over a two (2) week period, not to exceed eight (8) hours per day.

  • Maintenance Scheduling The NTO shall schedule maintenance of its facilities designated as NTO Transmission Facilities Under ISO Operational Control and schedule any outages (other than forced transmission outages) of said transmission system facilities in accordance with outage schedules approved by the ISO. The NTO shall comply with maintenance schedules coordinated by the ISO, pursuant to this Agreement, for NTO Transmission Facilities Under ISO Operational Control. The NTO shall be responsible for providing notification of maintenance schedules to the ISO for NTO Transmission Facilities Requiring ISO Notification. The NTO shall provide notification of maintenance schedules to affected Transmission Owners for NTO Transmission Facilities Requiring ISO Notification and Local Area Transmission Facilities pursuant to Section 3.5.3 of the ISO Services Tariff.

  • System Operations Each party, at its own expense, shall provide and maintain the equipment, software, services and testing necessary to transmit Data Communications to, and receive Data Communications from the parties’ respective Receipt Computers.

  • Compensation for Holidays Falling Within Vacation Schedule If a paid holiday falls on or is observed during an Employee's vacation period, she shall be allowed an additional vacation day with pay at a time mutually agreed upon by the Employer and the Employee.

  • Personnel Selection Leave 35.6.1 Where an employee participates in a personnel selection process for a position in the Public Service, as defined in the Financial Administration Act, the Council shall grant leave of absence with pay for the period during which the employee's presence is required for purposes of the selection process, and for such further period as the Council considers reasonable for the employee to travel to and from the place where his presence is so required.

  • Personnel Policies The School shall adopt, update, and adhere to personnel policies. These policies must be made readily accessible from the School’s website or school office, as described in Section 11.4. 1. If the policy is not available from the School’s website, the School shall submit the current policy to the Commission.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!