Participating TO’s Delivery Network Upgrades Sample Clauses

Participating TO’s Delivery Network Upgrades. The additions, modifications, and upgrades to the Participating TO’s Transmission System at or beyond the Point of Interconnection, other than Reliability Network Upgrades, identified in the Interconnection Studies, as identified in Attachment 6, to relieve constraints on the CAISO Controlled Grid.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Participating TO’s Delivery Network Upgrades. The Network Upgrades of the Tehachapi Renewable Transmission Project as defined in Section 7 of this Appendix A, excluding segments four and nine.
Sample 1
Participating TO’s Delivery Network Upgrades. The Network Upgrades comprising the fourth through eleventh segments of the Tehachapi Renewable Transmission Project, as defined in Section 8 of this Appendix A. 3. Distribution Upgrades: None.
Sample 1
Participating TO’s Delivery Network Upgrades. The Participating TO shall implement the following Delivery Network Upgrades: 1. West of Xxxxxx Upgrades – Upgrade the following existing 220kV transmission lines by rebuilding the lines with new 2B-1590 kcmil ACSR conductors per phase supported on two sets of double-circuit tower structures and replacing all substations’ terminal equipment with 4,000A rated elements. Components of this upgrade consist of - x. Xxxxxx – El Casco 220kV Transmission Line – 30 circuit miles b. El Casco – San Bernardino 220kV Transmission Line -14 circuit miles x. Xxxxxx – San Bernardino 220kV Transmission Line – 43 circuit miles
Sample 1
Participating TO’s Delivery Network Upgrades. None. 2. Distribution Upgrades. None. See Attachment 2, Section 18. A. Technical Standards Applicable to Asynchronous Generating Facilities
Sample 1
Participating TO’s Delivery Network Upgrades. The Participating TO shall implement the following Delivery Network Upgrades: 1. West of Xxxxxx Upgrades – Upgrade the following existing 220kV transmission lines to 3,000A rating by replacing all conductors with new 2- 1590 kcmil ACSR per phase, upgrading towers to support larger conductor where necessary and replacing all substations’ terminal equipment with 3,000A rated elements. Components of this upgrade consist of - Xxxxxx – San Bernardino No.1 220kV Transmission Line – 43 circuit miles Xxxxxx – San Bernardino No.2 220kV Transmission Line – 43 circuit miles Xxxxxx – Vista No.1 220kV Transmission Line – 45 circuit miles Xxxxxx – Vista No.2 220kV Transmission Line – 45 circuit miles Xxxxxx Substation: Upgrade four 220kV line positions San Bernardino G.S.: Upgrade two 220kV line positions Vista Substation: Upgrade two 220kV line positions Note: Prior to this upgrade the Xxxxxx-San Bernardino No. 2 220kV Transmission Line will be looped into the new El Casco Substation forming the two new Xxxxxx-El Casco and El Casco-San Bernardino 220kV Transmission Lines. After such line re-configuration, the Xxxxxx – San Bernardino No.1 220kV Transmission Line will be re-named Xxxxxx – San Bernardino 220kV Transmission Line. The Xxxxxx and San Bernardino 220kV line positions at the new El Casco Substation will be rated 3,000A and will not require any upgrades. 2. Colorado River Substation Expansion – Installation of the No. 2 AA 1120MVA 500/220kV transformer bank with corresponding 500kV and 220kV bank positions. These facilities correspond to the First Sequence; however, the First Sequence does not require this facility to interconnect. The component of this upgrade are as follows - a. Colorado River 2 AA 500/220 kV transformer bank 500 kV Position - Install the following equipment on a two-breaker line position to expand to a three-breaker line / bank position as required to connect the No. 2 AA transformer bank one (1) 108 ft. high x 90 ft. wide dead-end structure one (1) 500kV 4000A-50kA circuit breaker two (2) 500kV 4000A-80kA horizontal-mounted group- operated disconnect switches one (1) grounding switch attachment remove twelve (12) 500kV bus supports and corresponding steel pedestals and foundations b. Colorado River 2AA 500/220 kV Transformer Bank – Install one 1120MVA 500/161-220kV Transformer Bank as follows: three (3) 373MVA 500/161-220kV single-phase units three (3) 500kV surge arresters three (2) 220kV surge arresters one (1) 13.8kV tertiary bus equipped...
Sample 1
Participating TO’s Delivery Network Upgrades. The Participating TO shall: 1. Cool Water-Xxxx 220kV Transmission Line: a. Install a new 59 mile 220kV transmission line including the following elements: i. approximately 16 circuit miles of 2B-2156 KCMIL ACSR conductor (510,000 linear feet) ii. approximately 43 circuit miles of 2B-1590KCMIL ACSR conductor (1,365,000 linear feet) iii. ½ inch steel overhead ground wire as needed iv. approximately 59 miles of OPGW (315,000 linear feet) b. The work also requires the removal of the following elements: i. approximately eighteen 220kV single circuit dead-end lattice structures ii. approximately one hundred two 220kV single circuit suspension lattice structures iii. approximately 32 circuit miles of 605KCMIL ACSR conductor (510,000 linear feet)
Sample 1
AutoNDA by SimpleDocs
Participating TO’s Delivery Network Upgrades 
Sample 1Sample 2

Related to Participating TO’s Delivery Network Upgrades

  • Network Upgrades The Transmission Owner shall design, procure, construct, install, and own the Network Upgrades described in Attachment 6 of this Agreement. If the Transmission Owner and the Interconnection Customer agree, the Interconnection Customer may construct Network Upgrades that are located on land owned by the Interconnection Customer. Unless the Transmission Owner elects to pay for Network Upgrades, the actual cost of the Network Upgrades, including overheads, shall be borne initially by the Interconnection Customer.

  • NETWORK INTERCONNECTION METHODS 3.1 The Interconnection provided herein may not be used solely for the purpose of originating a Party’s own interexchange traffic.

  • DELIVERY: FOB DESTINATION, INSIDE DELIVERY, FREIGHT PAID Whenever possible, contractors should give the ordering entities 3 working days prior notice of any deliveries and/or installations. Furniture contractors will not be responsible for the removal/moving of existing furnishings unless requested by the ordering entity. Contractors should verify site readiness prior to delivery. All deliveries will be made during normal working hours unless otherwise arranged with the ordering entity. Contractor will communicate any scheduling delays and/or changes immediately. Agencies will not be responsible for any freight damage, concealed or otherwise.

  • Software Use Case Red Hat Enterprise Linux Developer Suite Subscription Services for Red Hat Enterprise Linux Developer Suite are available for Development Purposes only.

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Software Upgrades All Software Releases (including all Error corrections made available pursuant to this Agreement) that RSA in its sole discretion: (a) deems to be logical improvements to the Software; (b) make generally available to all licensees of the Software; and (c) does not separately price or market.

  • Statement of Work The Statement of Work to which Grantee is bound is incorporated into and made a part of this Grant Agreement for all purposes and included as Attachment A.

  • Delivery Schedule The Goods specified in the List of Goods are required to be delivered within the acceptable time range (after the earliest and before the final date, both dates inclusive) specified in Section V, Schedule of Requirements. No credit will be given to deliveries before the earliest date, and Tenders offering delivery after the final date shall be treated as non-responsive. Within this acceptable period, an adjustment of [insert the adjustment factor], will be added, for evaluation purposes only, to the Tender price of Tenders offering deliveries later than the “Earliest Delivery Date” specified in Section V, Schedule of Requirements.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!