Products and Services Terms and Conditions Sample Clauses

Products and Services Terms and Conditions. 1.10.1 Suppliers and their employees are expected to adhere to acceptable standards of behaviour, i.e. standards expected of Contracting Authorities staff. 1.10.2 Except in relation to Health & Safety matters within their control, the Supplier or his/her agent will take their instructions from the Director of Services, or authorised employees of the Contracting Authority (Framework Purchaser) who have been authorized in writing to issue instructions. 1.10.3 The Supplier is responsible for ensuring that the supplied materials meet the required Specification as detailed in the Instructions Document, and in any Mini-Competition. 1.10.4 The Supplier may be required to produce evidence of a quality control plan and quality control documentation to prove testing against and compliance with the required specification. The supplied materials shall be in accordance with the relevant Specification. Should the material not conform to the standards, the Supplier will be excluded from the Framework. All samples specified here and in the Mini-Competition shall be provided free of charge, when required, to the Contracting Authority (Purchaser). Testing & sampling shall be carried out to the relevant standards. Suppliers should note that the requirements of the Specification identified in Schedule 1 must be met. 1.10.5 If applicable, maximum weight restrictions will apply and the Contracting Authority (Framework Purchaser) will not pay for material in excess of such maximum weight. 1.10.6 At Mini-Competition stage, Suppliers may be required to submit a schedule of quarry sources when responding to Requests for Tender, where applicable to the Products required under such a Request for Tender. 1.10.7 All Contracting Authorities (Framework Purchasers) will be advised of Suppliers appointed to the Framework who are eligible to compete in Mini-Competitions within their Contracting Authority area. Quarry or pit sources as identified by Suppliers at Mini-Competition stage will be checked for compliance with the requirements of the Planning & Development Acts and other relevant Statutes and Regulations in force by the Planning Department of the Contracting Authority. 1.10.8 In addition, each Supplier shall ensure that operations at the site specified in his/her Proposal comply with the requirements of the Planning and Development Acts and other relevant Statutes and Regulations in force. Suppliers found to be non-compliant for any source may be temporarily suspended from the Fram...
AutoNDA by SimpleDocs
Products and Services Terms and Conditions. 2.1 MERCHANT agrees to pay the fees as set out herein and as may be amended from time to time. MERCHANT agrees to abide by all parameters set out in any specifications or documentation as amended from time to time. MERCHANT agrees to provide the information requested in the Enrollment form(s), attached hereto as Exhibit A and incorporated herein by this reference. 2.2 The PARTIES agree to add the following products and/or services to SERVICES. First Billing® First Batch® First Account Updater® ACH Services* ✔ *If ACH Services are checked, by its signature below MERCHANT acknowledges receipt of and agrees to be bound by the Automated Clearing House (“ACH”) Services Amendment To the Merchant Transaction Processing Agreement.

Related to Products and Services Terms and Conditions

  • ONLINE TERMS AND CONDITIONS The Terms and Conditions specified herein shall govern all members of xxx.xxxxxxxxxxxxxxxx.xxx (“EHSAN AUCTIONEERS SDN. BHD. website”).

  • CONTRACT TERMS AND CONDITIONS This section sets forth the terms and conditions of the Contract.

  • Products and Services General Information

  • Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).

  • Specific Terms and Conditions To the extent that Contractor has received an award for Lot 4, Implementation Services, the following terms and conditions apply to Lot 4 Implementation Services. All Services covered under Lot 4 – Implementation Services must be performed within CONUS. An RFQ for this Lot will be awarded based on, and result in, a deliverable-based Statement of Work (SOW) which will be incorporated into an Authorized User Agreement. The RFQ will include but is not limited to: Authorized User timeframes; system integration requirements; and other risks that may affect the cost to the Authorized User. All responses to RFQs must include detailed price information, including but not limited to: hours required per title, cost per hour, etc. Travel, lodging and per diem costs must be itemized in the total quote and may not exceed the rates in the NYS OSC Travel Policy. More information can be found at xxxx://xxx.xxx.xxxxx.xx.xx/agencies/travel/travel.htm. All costs must be itemized and included in the Contractor’s quote. Article 17-B of the New York State Executive Law provides for more meaningful participation in public procurement by certified Service-Disabled Veteran-Owned Businesses (“SDVOB”), thereby further integrating such businesses into New York State’s economy. OGS recognizes the need to promote the employment of service-disabled veterans and to ensure that certified service-disabled veteran-owned businesses have opportunities for maximum feasible participation in the performance of OGS contracts. In recognition of the service and sacrifices made by service-disabled veterans and in recognition of their economic activity in doing business in New York State, Bidders are expected to consider SDVOBs in the fulfillment of the requirements of the Contract. Such participation may be as subcontractors or suppliers, as protégés, or in other partnering or supporting roles.

  • General Terms and Conditions During the term of this Contract, Contractor agrees to procure and maintain insurance which meets all County’s requirements in the General Terms and Conditions.

  • Payment Terms and Conditions 67.6.1 CLEC shall pay a Transit Service Charge as set forth in Table 1 for any Transit Traffic routed to CenturyLink by CLEC. 67.6.2 CLEC shall be responsible for payment of Transit Service charges on Transit Traffic routed to CenturyLink by CLEC and for any charges assessed by the terminating carrier. CLEC agrees to enter into traffic exchange agreements with third-parties prior to routing any Transit Traffic to CenturyLink for delivery to such third parties, and CLEC will indemnify, defend and hold harmless the Transit Service provider against any and all charges levied by such third-party terminating carrier with respect to Transit Traffic, including but not limited to, termination charges related to such traffic and attorneys’ fees and expenses.

  • Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.

  • Description of Goods or Services and Additional Terms and Conditions The Contractor shall perform as set forth in Exhibit A. For purposes of this Contract, to perform and the performance in Exhibit A is referred to as “Perform” and the “Performance.”

  • SETTLEMENT TERMS AND CONDITIONS Contour is willing to resolve the violations cited herein by entering into this Agreement and freely and voluntarily waives its right to a hearing under Banking Law Sections 44 and 598. Therefore, in consideration of the promises and covenants set forth herein, the Settling Parties agree, as follows: 1. Contour shall not: a. Under any name or designation conduct or transact business in this state at any physical location that has not been approved by the Superintendent; b. Under any name or designation conduct or transact business in this state through the use of any website or domain name that has not been approved by the Superintendent; c. Conduct or transact business under any name or designation other than that shown on its license or branch certificate; d. Assign mortgage loan originators to locations that are not licensed by the Superintendent; e. Engage in net branching or offer net branching opportunities in violation of the Department’s prohibition against net branching; f. Transfer or assign its mortgage banker license; g. Engage in conduct prohibited by Part 38 of the General Regulations. 2. Contour agrees to take all necessary steps to ensure its compliance with all applicable federal and state laws, regulations, supervisory requirements, and guidance letters relating to its mortgage business, including but not limited to: a. Complying with the requirements of Banking Law Articles 12-D and 12- E, Part 420 of the Superintendent’s Regulations, and Part 38 of the General Regulations; b. Assigning mortgage loan originators only to locations licensed by the Superintendent, and displaying the license for each mortgage loan originator working at such location; c. Providing the proper oversight and supervision of each individual who becomes employed by, or affiliated as an independent contractor of or consultant for, Contour; and d. Maintaining books and records in a manner that will enable the Superintendent to determine whether Contour is complying with all applicable federal and state laws, regulations, supervisory requirements, and guidance letters. 3. Contour agrees to develop a comprehensive operations manual governing its day-to-day operations, which shall, at a minimum, address the: a. Establishment of new business locations; b. Use of business names and designations; c. Activities and supervision of employees, independent contractors, and consultants; and d. Maintenance of books and records. 4. Contour agrees to develop a written compliance manual designed to ensure compliance with all applicable federal and state laws, regulations, supervisory requirements, and guidance letters. The manual shall, at a minimum, address: a. The designation of an individual responsible for monitoring compliance with all applicable laws, regulations, supervisory requirements, and guidance letters; b. Prohibited conduct as described by Section 38.7 of the General Regulations; c. The duties of an originating entity as described by Part 420 of the Superintendent’s Regulations; d. Reporting requirements as described by Part 420 of the Superintendent’s Regulations; e. Use of business names and designations, domain names, and websites; f. The duties and responsibilities of employees, independent contractors, and consultants; and g. A compliance training program for employees and independent contractors. 5. Within ninety (90) days from the effective date of this Agreement, Xxxxxxx agrees to submit drafts of its operations and compliance manuals to the Department. 6. Within one hundred twenty (120) days from the effective date of this Agreement, Xxxxxxx agrees to submit copies of its final operations and compliance manuals to the Department together with a letter from an authorized officer of Contour indicating his or her approval of said manuals. 7. Contour agrees that its mortgage banking activities will be subject to examinations semi-annually for a twenty-four-month period following the execution of this Agreement. 8. Contour agrees to pay a fine of $20,000. Contour further agrees that such payment will be made in immediately available funds in accordance with Department payment instructions.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!