PROJECT CLEANLINESS Sample Clauses

PROJECT CLEANLINESS. .1 Maintain Work in tidy condition, free from accumulation of waste products and debris, including that caused by Owner or other Contractors.
Sample 1Sample 2
AutoNDA by SimpleDocs
PROJECT CLEANLINESS. 1 Maintain Work in tidy condition, free from accumulation of waste products and debris, including other than that caused by The City or other Contractors. .2 Remove waste materials from site at regularly scheduled times or dispose of as directed by Contract Administrator. Do not burn waste materials on site. .3 Make arrangements with and obtain permits from authorities having jurisdiction for disposal of waste and debris. .4 Provide on-site containers for collection of waste materials and debris. .5 Remove waste material and debris from site at end of each working day. .6 Dispose of waste materials and debris off site. .7 Clean interior areas prior to start of finish work, and maintain areas free of dust and other contaminants during finishing operations. .8 Store volatile waste in covered metal containers, and remove from premises at end of each working day. .9 Provide adequate ventilation during use of volatile or noxious substances. Use of building ventilation systems is not permitted for this purpose. .10 Use only cleaning materials recommended by manufacturer of surface to be cleaned, and as recommended by cleaning material manufacturer. .11 Schedule cleaning operations so that resulting dust, debris and other contaminants will not fall on wet, newly painted surfaces nor contaminate building systems.
Sample 1
PROJECT CLEANLINESS. 1 Maintain Work in tidy condition, free from accumulation of waste products and debris, including that caused by The City or other Contractors. .2 Remove waste materials from site at daily regularly scheduled times or dispose of as directed by Contract Administrator. Do not burn waste materials on site, unless approved by Contract Administrator. .3 Provide on-site containers for collection of waste materials and debris. .4 Provide and use marked separate bins for recycling. Refer to Section 01 74 21 - Construction/Demolition Waste Management and Disposal. .5 Dispose of waste materials and debris off site. .6 Clean interior areas prior to start of finishing Work, and maintain areas free of dust and other contaminants during finishing operations. .7 Store volatile waste in covered metal containers, and remove from premises at end of each working day. .8 Provide adequate ventilation during use of volatile or noxious substances. Use of building ventilation systems is not permitted for this purpose. .9 Use only cleaning materials recommended by manufacturer of surface to be cleaned, and as recommended by cleaning material manufacturer. .10 Schedule cleaning operations so that resulting dust, debris and other contaminants will not fall on wet, newly painted surfaces nor contaminate building systems.
Sample 1
PROJECT CLEANLINESS. 1 Maintain Work in tidy condition, free from accumulation of waste products and debris, including other than that caused by The City or other Contractors. .2 Remove waste materials from Site at regularly scheduled times or dispose of as directed by Contract Administrator. Do not burn waste materials on Site. .3 Make arrangements with and obtain permits from authorities having jurisdiction for disposal of waste and debris. .4 Provide on-Site containers for collection of waste materials and debris. .5 Remove waste material and debris from Site at end of each working day. .6 Dispose of waste materials and debris off Site. .7 Clean interior areas prior to start of finish work, and maintain areas free of dust and other contaminants during finishing operations. .8 Store volatile waste in covered metal containers, and remove from premises at end of each working day. .9 Provide adequate ventilation during use of volatile or noxious substances. Use of building ventilation systems is not permitted for this purpose. .10 Use only cleaning materials recommended by manufacturer of surface to be cleaned, and as recommended by cleaning material manufacturer. .11 Schedule cleaning operations so that resulting dust, debris and other contaminants will not fall on wet, newly painted surfaces nor contaminate building systems. 1.2 FINAL CLEANING .1 When Work is Substantially Performed, remove surplus products, tools, construction machinery and equipment not required for performance of remaining Work. .2 Remove waste products and debris other than that caused by others, and leave Work clean and suitable for occupancy. .3 Prior to final review, remove surplus products, tools, construction machinery and equipment. .4 Remove waste products and debris other than that caused by The City or other Contractors. .5 Remove waste materials from Site at regularly scheduled times or dispose of as directed by Contract Administrator. Do not burn waste materials on Site. .6 Make arrangements with and obtain permits from authorities having jurisdiction for disposal of waste and debris. .7 Clean and polish glass, acrylic, hardware, stainless steel, and mechanical and electrical fixtures. Replace broken, scratched or disfigured glass or acrylic Bid Opportunity No. 339-2016 CLEANING panels.
Sample 1
PROJECT CLEANLINESS. 1 Maintain Work in tidy condition, free from accumulation of waste products and debris, including that caused by Owner or other Contractors. .2 Remove waste materials from site at regularly scheduled times or dispose of as directed by Departmental Representative. Do not burn waste materials on site. .3 Make arrangements with and obtain permits from authorities having jurisdiction for disposal of waste and debris. .4 Provide on-site containers for collection of waste materials and debris. .5 Provide and use clearly marked separate bins for recycling. .6 Remove waste material and debris from site and deposit in waste container at end of each working day. .7 Store volatile waste in covered metal containers, and remove from premises at end of each working day. .8 Dispose of waste materials, and debris off site at approved facilities.
Sample 1

Related to PROJECT CLEANLINESS

  • Cleanliness Resident agrees to keep the room in a clean and sanitary condition during the entire term of occupancy and to return his/her room to Provider in the same condition, including general cleanliness, as it was at the beginning of the term of occupancy, normal wear and tear excepted as determined by College acting on behalf of Provider. When there is vacant space in a partially occupied multi-person room, the vacant space must be maintained by the occupant(s) in a manner that will allow a new Resident to move in immediately. Failure to do so will result in assessment of a cleaning charge to Resident’s account.

  • Housekeeping Service and Cleanliness Housekeeping Service will be provided to clean only the kitchenette and washroom areas of the Room on a regularly scheduled basis as posted by the Manager. This Housekeeping Service is not optional. Residents must ensure that all counters and sinks are clear of any dishes, appliances, or any other personal items. As part of the Housekeeping Service, the Room will be inspected. Should the Room be found in an unhygienic state, the Resident(s) will be given 24 hours to return it to a proper state, or it will be cleaned at the discretion of the Manager with a minimum charge of $25.00. The Resident shall, at all times during the Term, keep all parts of the Room clean, including and not limited to; floor coverings, doors, walls, ceilings, kitchenette appliances, counters, cupboards, faucets, sinks, furniture, glass, window frames, and other furnishings. Vacuums, brooms, and mops may be signed out at the front desk, subject to availability.

  • Cleanliness and Safety; Entry Resident agrees to maintain the assigned bedroom space, the apartment and the common areas of the Property in a clean, safe and sanitary condition, to exercise all due care in the use of same, and to cooperate fully with the Property pest control program as requested. Resident will be responsible for the cost of treatment for bedbugs and similar pests to the extent Owner’s pest control vendor reasonably determines that an infestation has originated within Resident’s assigned space and during Resident’s occupancy. Resident will place all trash in provided receptacles and will be responsible for the cost of cleaning the interior or exterior of the apartment if not kept in sanitary condition. When outdoor temperatures are below 40 degrees Fahrenheit, Resident will keep the apartment’s heat turned on to prevent frozen or burst pipes, including during vacations. When outdoor temperatures exceed 85 degrees Fahrenheit, Resident will keep the apartment’s air conditioning turned on and set to a reasonable temperature to prevent mold or mildew growth, including during vacations. Owner and its agents, employees and contractors may enter any apartment and bedroom space to perform routine maintenance, inspections, showings and other ordinary functions, provided that Owner will provide advance notice to residents of an apartment before such entry. Owner reserves the right to enter an apartment and any bedroom space without prior notice (including a passkey and/or disarming the alarm or other means of entry if locks have been changed) for emergency maintenance or repair purposes, or when there is reasonable cause to believe that a situation exists that could cause danger to life, safety, health or property. Owner may confiscate any item deemed to cause a danger and is under no obligation to pay compensation for or to return such items.

  • PROJECT 3.01. The Recipient declares its commitment to the objectives of the Project. To this end, the Recipient shall carry out the Project in accordance with the provisions of Article IV of the General Conditions.

  • Project Site The “Project Site” is the place where the Work is being carried on.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins.

  • MAINTENANCE OF THE BUILDING /APARTMENT / PROJECT The Promoter shall be responsible to provide and maintain essential services in the Project till the taking over of the maintenance of the project by the Association upon the issuance of the completion certificate of the Project. The cost of such maintenance has been included in the Total Extras and Deposits as mentioned in clause 1.2.

  • PUBLIC WORKS AND BUILDING SERVICES CONTRACTS Work being done under a resulting Authorized User Agreement may be subject to the prevailing wage rate provisions of the New York State Labor Law. Such work will be identified by the Authorized User within the RFQ. See “Prevailing Wage Rates – Public Works and Building Services Contracts’ in Appendix B, Clause 10, OGS General Specifications. Any federal or State determination of a violation of any public works law or regulation, or labor law or regulation, or any OSHA violation deemed "serious or willful" may be grounds for a determination of vendor non-responsibility and rejection of proposal. The Prevailing Wage Case Number for this Contract is PRC# 2014011745. The Prevailing Wage Rates for various occupations and General Provisions of Laws Covering Workers on Article 8 Public Work Contract can be accessed at the following NYS Department of Labor website: xxxxx://xxxxxxxxxxxx.xxxxx.xx.xxx/wpp/xxxxXxxxXxxxxxx.xx?method=showIt  Insert PRC# 2014011745 in the box provided and click Submit.  Click Wage Schedule located underneath the main header of this page. The PDF file may be searched to obtain the Prevailing Wage Rate for a specific occupation. SHORT TERM EXTENSION In the event a replacement Contract has not been issued, any Contract let and awarded hereunder by the State, may be extended unilaterally by the State for an additional period of up to 3 months upon notice to the Contractor with the same terms and conditions as the original Contract including, but not limited to, prices and delivery requirements. With the concurrence of the Contractor, the extension may be for a period of up to 6 months in lieu of 3 months. However, this extension terminates should the replacement Contract be issued in the interim. PROCUREMENT INSTRUCTIONS Authorized Users should refer to the documents attached as Appendix G – Processes and Forms Templates for specific instructions on the usage of this Contract. OGS reserves the right to unilaterally make revisions, changes, additions and/or updates to the documents attached as Appendix G - Processes and Forms Templates without processing a formal amendment and/or modification. SPECIFICATIONS During the term of the Contract, the Authorized User may request Product specifications for particular items that have been included by the Contractor in its Pricing Pages. These specifications will be provided by the Contractor at no cost.

  • Building Commissioning Services The Owner may provide as a part of its testing services the Building Commissioning services involving the project’s HVAC and exhaust systems, temperature control systems, fire detection and alarm systems, emergency power and lighting system, fire suppression system, security locks and security locking control systems, food service equipment (if applicable), and laundry equipment (if applicable). In the event the Using Agency’s Program specifies additional commissioning services, the Owner shall procure such services as well. The Owner, through its Executive Administrator, may engage an independent Commissioning Authority. It is the intent of this Article that the Commissioning Authority enforce the requirements mentioned herein and certify that the systems and equipment listed all function properly prior to the initiation of each final inspection.

  • MAINTENANCE OF THE SAID BUILDING / APARTMENT / PROJECT The Promoter shall be responsible to provide and maintain essential services in the Project till the taking over of the maintenance of the project by the association of the allottees. The cost of such maintenance has been included in the Total Price of the [Apartment/Plot]. [Insert any other clauses in relation to maintenance of project, infrastructure and equipment]

Time is Money Join Law Insider Premium to draft better contracts faster.