Real-Time Data. (a) No later than sixty (60) Days prior to the Commercial Operation Date, Seller shall install one or more stand-alone meteorological towers at the Facility Site and the measurement, telemetry and communications equipment necessary or advisable (according to Accepted Industry Practices) to measure, record, store and provide to Buyer the data required by this Section 8.4 on the basis required by this Section 8.4. Seller shall maintain the same (according to the standards set forth in Section 9.1(b)) until the end of the Delivery Term.
(b) Throughout the Delivery Term, Seller shall measure, record, store and provide to Buyer the data set forth in Schedule 8.4(b) on an around-the-clock basis and in intervals no longer than every ten (10) seconds. In addition, Seller shall provide to Buyer any other data relating to the Facility that Seller elects to measure and record at the Project Site on the same frequency interval basis as Seller receives that data.
(c) On or before the Delivery Term Commencement Date, Seller shall establish a virtual private network (VPN) connection between Seller and Buyer. Following establishment of such VPN connection, Seller shall, throughout the Delivery Term, maintain such connection and make available the data described in Section 8.4(b) to Buyer by DNP protocol in an encrypted format over TCP/IP through such VPN connection. In addition, promptly upon request from Buyer, Seller shall provide, and thereafter maintain throughout the Delivery Term, (i) a substation data feed by DNP serial over fiber optic or other media from Seller’s SEL-2032 to Buyer’s on-site remote terminal unit. In connection therewith, and without limiting Section 9.5, Seller shall also provide to Buyer, throughout the Delivery Term, a trunk line to the Facility substation, a server rack/UPS and space in server room for Buyer’s on-site remote terminal unit and other related communications equipment. Notwithstanding the foregoing, if the equipment, technology or any other aspect contemplated by this Section 8.4(c) becomes antiquated, obsolete, impracticable or outside of Accepted Industry Practices and Buyer so requests, Seller shall modify such aspects as reasonably requested by Buyer to bring them back into then-current equipment and technology, practicability and Accepted Industry Practices.
(d) Within thirty (30) Days after the end of each month, Seller shall provide to Buyer a report that provides the data described in Section 8.4(b) for such month, as well ...
Real-Time Data. 15.1.1 During the Operation Period, the Authority shall give the Operator the access to the raw feed of the monitoring system pertaining to the performance of the Operator under this Contract and as generated by ITS. If the Authority fails to provide the daily raw feed then it shall be deemed to be an Authority Event of Default.
Real-Time Data. Seller shall communicate all data necessary for Company to integrate the Facility into Company’s EMCC in real time through the Facility’s SCADA System in accordance with Exhibit I - AGC Protocols; Data Collection; Technical Specifications. Seller shall maintain the Facility’s SCADA System so that it is capable of interfacing with and reacting to Company’s AGC Set-Point and responding to signals from the Company’s EMCC in accordance with the AGC Protocols. Seller shall use Commercially Reasonable Efforts to adjust the real time Park Potential of the Facility when Company communicates to Seller a measured difference of plus or minus two percent between the metered Renewable Energy and Park Potential, during periods when generation is not curtailed. From and after the Commercial Operation Date, Seller shall provide Company, at Seller’s expense, real time performance and meteorological data for all Solar Units and meteorological towers at the Facility in accordance with Exhibit I - AGC Protocols; Data Collection; Technical Specifications for the Term of this PPA. Seller shall maintain Seller-owned data collection systems that are compatible with Company’s PI System. Seller shall ensure that real time communications capabilities are available and maintained for transmission to Company’s PI System. Seller shall ensure that all meteorological equipment at a minimum meets the specifications set forth in Exhibit I - AGC Protocols; Data Collection; Technical Specifications. Company shall have the right to disclose data gathered through the Company’s PI System publicly; provided, however, that such data is (i) masked to obscure the origin of the data and (ii) aggregated so that the data cannot be correlated and used by competitors of Seller and/or the supplier of the Solar Units.
Real-Time Data. The Municipality agrees to provide to the County the real time On-demand service route information in a format approved by DTPW, or its successor department, such as provided by a Global Positioning System (GPS), and which is compatible with, and may be integrated into, the County’s smartphone transit tracker application and common third-party applications.
Real-Time Data. (A) Seller shall communicate all data necessary for Company to integrate the Facility into Company’s EMCC in real time through the Facility’s SCADA System in accordance with Exhibit I - AGC Protocols; Dispatch and Availability Notices; Data Collection; Technical Specifications, and subject to Exhibit O – Battery Storage System Operating Procedures. Seller shall maintain the Facility’s SCADA System so that it is capable of interfacing with and reacting to Company’s AGC Set-Point and responding to signals from Company’s EMCC in accordance with the AGC Protocols, subject to Exhibit O – Battery Storage System Operating Procedures.
(B) Seller shall use Commercially Reasonable Efforts to correct the representation of the real time Park Potential of the Facility when Company communicates to Seller a measured difference of plus or minus two percent between the metered Renewable Energy and Park Potential, during periods when generation is not curtailed.
Real-Time Data. Commencing on the first date on which Facility Energy is generated, and continuing throughout the Delivery Term, Seller shall provide to Buyer the following data on a real-time basis:
(i) Read-only access to all meteorological and pyranometer measurements;
(ii) MW(ac) capacity based upon inverter and panel availability, and any other Facility availability information recorded by the SCADA system for the Facility;
(iii) Read-only access to energy output information collected by the SCADA system for the Facility. Seller shall store such information for up to three (3) months after delivery thereof to Buyer; and
(iv) Read-only access to all Electric Metering Devices (other than meteorological data) installed, owned and operated by Seller at the Facility.
Real-Time Data. Commencing on the first date on which Facility Energy is generated, and continuing throughout the Delivery Term, Seller shall provide to Buyer the following data on a real-time basis:
(i) Read-only access to all meteorological and pyranometer measurements;
(ii) The Available Capacity of the Generating Facility and the Storage Facility based upon equipment availability, the Storage Contract Capacity and Storage Contract Output, and any other Facility availability information recorded by the supervisory control and data acquisition (“SCADA”) system for the Facility;
(iii) Read-only access to energy output information collected by the SCADA system for the Facility. Seller shall store such information for up to three (3) months after delivery thereof to Buyer; and
(iv) Read-only access to all Electric Metering Devices (other than meteorological data) installed, owned and operated by Seller at the Facility.
Real-Time Data. Reserve Holder shall deliver, at its own expense, the following unit-specific data to a point of delivery indicated by Fingrid: · volume of the frequency controlled normal operation reserve (MW) to be maintained
Real-Time Data. Seller shall provide, at the Department’s option and expense, access to real-time meter data via appropriate telecommunications equipment.
