Circuit Mileage definition

Circuit Mileage means, with respect to any Circuit, the length of such Circuit in airline miles computed according to industry standard V&H coordinates as specified in the Purchase Order pursuant to which such Circuit is ordered.
Sample 1Sample 2
Circuit Mileage means the length of a Circuit specified in the applicable Purchase Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services -Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. "DS-1" means a circuit complying with AT&T Tech. Ref. Pub. 62411, December 1990, with Addexxxx 0, Xxxxx 0000, xxd Bellcore TR-MWT-000499, Issue 5, December 1993. "DS-3" shall mean a circuit meeting the specifications
Sample 1Sample 2
Circuit Mileage means the length of a Circuit specified in the applicable Purchase Order. "DS-0" means a circuit complying with TR-TSY-000333. "Switched and Special Access Services - Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. A "DS-1" is a signal conforming to the requirements set forth in Sections 9.3 and 10.2 of Bellcore TR-NWT-000499, Issue 5, December 1993. A "DS-3" is a signal conforming to the requirements set forth in Section 9.6 and 10.5 of Bellcore TR-NWT-000499, Issue 5, December, 1993. "Purchase Order" means any Excel purchase order accepted by IXC. "Requested Service Date" means the date Private Line Service on a Circuit is requested to commence specified in the applicable Purchase Order. "Service" means transmission service provided between North American DSX standard cross-connect panels located in IXC's terminal locations.
Sample 1Sample 2

Examples of Circuit Mileage in a sentence

  • Private Line Circuit Mileage is a DID Trunk running from the Central Office to the PBX charged per 1/10 mile.


More Definitions of Circuit Mileage

Circuit Mileage means the length of a Circuit specified in the applicable Purchase Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services - Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. "DS-1" means a circuit complying with AT&T Tech. Ref. Pub. 62411, December 1990, with Xxxxxxxx 0, Xxxxx 0000, and Bellcore TR-MWT-000499, Issue 5, December 1993. "DS-3" shall mean a circuit meeting the specifications set forth in AT&T Technical Reference Pub. 54014 Addendum 1, November 1992 and Bellcore TB-NWT-608499, Issue 5, December 1993. "Purchase Order" means any Lessee purchase order accepted by Lessor. "Requested Service Date" means the date Service on a Circuit is requested to commence specified in the applicable Purchase Order. "Service" means transmission service provided between North American DSX standard cross-connect panels located in Lessor's terminal locations. To confirm their agreement to be bound hereby, the parties have executed this agreement below:
Sample 1Sample 2
Circuit Mileage means the length of a Circuit specified in the applicable Purchase Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services - Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. A "DS-l" is a signal conforming to the requirements set forth in Sections 9.3 and 10.2 of Bellcore TR-NWT-000499, Issue 5, December 1993. A "DS-3" is a signal conforming to the requirements set forth in Section 9.6 and 10.5 of Bellcore TR-NWT-000499, Issue 5, December 1993. "FOC" means Firm Order Confirmation, the form Supplier submits to Customer indicating the date that an ordered Circuit will be activated. An "OC-3c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI T1.105, Digital Hierarchy- Optical Interface Rates and Formats Specifications. An "OC-12c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI TI.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-48c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI T1.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. "On-Net" means a Circuit(s) provided on Supplier's network between two cities. "Purchase Order" means any Customer purchase IXC-CONFIDENTIAL IXC CONTRACT NO. 7188 PAGE 1 OF AMENDMENT NO.1 TO MSA 08/12/99
Sample 1Sample 2
Circuit Mileage means the length of a Circuit specified in the applicable Purchase Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services - Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. A "DS-1" is a signal conforming to the requirements set forth in Sections 9.3 and 10.2 of Bellcore TR-NWT-000499, Issue 5, December, 1993. A "DS-3" is a signal conforming to the requirements set forth in Section 9.6 and 10.5 of Bellcore TR-NWT-000499, Issue 5, December, 1993. A "Firm Order Commitment" means the written confirmation provided to Customer which confirms the specific date that the Circuit is available to Customer. An "OC-3" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI T1.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-12" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI T1.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. "Purchase Order" means any Customer purchase order accepted by Supplier. "Requested Service Date" means the date Service on a Circuit is requested to commence specified in the applicable Purchase Order. "Service" means transmission service provided between North American DSX standard cross-connect panels located in Supplier's terminal locations. 9 EXHIBIT A [FORM OF PURCHASE ORDER/MARKET SERVICE ORDER] 10 EXHIBIT B PRIVATE LINE SERVICE ANCILLARY PRICING [ * * * ] 11 EXHIBIT C On Net City Listing for Private Line [ * * * ] 12 EXHIBIT D Private Line Pricing [ * * * ] 13 Exhibit E Taxes on Telecommunications Service [ * * * ] 14 AMENDMENT NO. 1 TO IXC MASTER SERVICE AGREEMENT [IXC COMMUNICATIONS LOGO] This Amendment No. 1 to the Master Service Agreement is made and entered into by and between IXC COMMUNICATIONS SERVICES, INC., a Delaware corporation with its principal place of busines at 1122 Xxxxxxx xx Xxxxx Xxx. Xxxxx, Xxxxxx, Xxxxx 00000-0000 ("Xupplier"), and PATHNET, INC., a Delaware corporation with its principal place of business at 1015 00xx Xxxxxx Xxxxxxxxx, Xxxxx 000, Xxxxxxxxxx XX 00000 ("Xustomer"). For purposes of this Amendment, the rates, terms and conditions set forth herein shall become effective on the first day of the next IXC billing cycle following...
Sample 1
Circuit Mileage means the length of a Circuit specified in the applicable Market Service Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services - Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. A "DS-1" is a signal conforming to the requirements set forth in Sections 9.3 and 10.2 of Bellcore TR-NWT-000499, Issue 5, December 1993. A "DS-3" is a signal conforming to the requirements set forth in Section 9.6 and 10.5 of Bellcore TR-NWT-000499, Issue 5, December 1993. "FOC" means Firm Order Confirmation, the form Supplier submits to Customer indicating the date that an ordered Circuit will be activated. "Market Service Order" means any Customer Market Service Order accepted by Supplier. An "OC-3c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI T1.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-12c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI T1.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-12c Unprotected (1+0)" - 655 megabits Lambda - is the ANSI SONET transmission standard for high capacity optical telecommunications with line rate of 655 megabits per second in unprotected configuration, as specified in Bellcore GR-253-CORE. An "OC-48c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI T1.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-48c Unprotected (1+0)" - 2.5 gigabits Lambda - is the ANSI SONET transmission standard for high capacity optical telecommunications with line rate of 2.5 gigabits per second in unprotected configuration, as specified in Bellcore GR-253-CORE. "On-Net" means a Circuit(s) provided on Supplier's network between two cities. "Requested Service Date" means the date Service on a Circuit is requested to commence specified in the applicable Market Service Order. "Service" means transmission service provided between North American DSX standard cross-connect panels located in Supplier's terminal locations or when provided via Broadwing LDX Optical cross-connect panels located in Supplier...
Sample 1
Circuit Mileage means the length of a Circuit specified in the applicable Purchase Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services - Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. "DS-1" means a circuit complying with AT&T Tech. Ref. Pub. 62411, December 1990,with Addexxxx 0, Xxxxx 0000, and Bellxxxx XX-XXX-000000, Xxsue 5, December 1993. "DS-3" means a circuit meeting the specifications set forth in AT&T Technical Reference Pub. 54014 Addendum 1, November 1992 and Bellxxxx XX-XXX-000000, Xxsue 5, December 1993. "Purchase Order" means any Customer purchase order accepted by Supplier. "Requested Service Date" means the date Service on a Circuit is requested to commence specified in the applicable Purchase Order. "Service" means transmission service provided between North American DSX standard cross-connect panels located in Supplier's terminal locations. *** Certain information on this page has been omitted and filed separately with the Commission. Confidential treatment has been requested with respect to the omitted portions. EXHIBIT A Req'st Svc Date:________ IXC - PRIVATE LINE OFFICE USE ONLY Accepted Earlier Activation: MARKET SERVICE ORDER (MSO) MSO #______________ Y______N_______ CKT ID:_____________ RELATED MSO:____________ PURCHASE ORDER FORM FOR CUSTOMER ORDER NO:__________ Pursuant to the MASTER SERVICE AGREEMENT by and between IXC as Supplier and __________________________ as Customer, dated______________, 19___, Customer orders and Supplier shall provide the following Digital Transmission Service: QTY RATE TERM MILES New ________ Renew __________ Cancel ________ Disconnect __________ DS-3 _____ _____ _____ _____ Change ________ Expedite Y____ N___ DS-1 _____ _____ _____ _____ On Net ________ Off Net __________ DS0 _____ _____ _____ _____ Protocol________ Reconfigure__________ CIF _____ _____ _____ _____ Other ________________________________ Other _____ _____ _____ _____ Customer Contact:____________________ Phone #: ________________ Fax # _______________ Technical Contact____________________ Phone #: ________________ Fax # _______________ CITY LOCATION A: ____________________ CITY LOCATION B:_________________________________ Special____________ Switched____________ Special________________ Switched________________ Bypass Y_____N_____ Owner ____________ Bypass Y_______N_______ Owner ________________
Sample 1
Circuit Mileage means the length of a Circuit specified in the applicable Service Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services—Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. A "DS-]" is a signal conforming to the requirements set forth in Sections 9.3 and 10.2 of Bellcore TR-NWT-000499, Issue 5, December 1993. A "DS-3" is a signal conforming to the requirements set forth in Section 9.6 and 10.5 of Bellcore TR-NWT-000499, Issue 5, December 1993. "E-l" is a European digital transmission format devised by the "International Telecommunications Union—Telephone Standard ("ITU-TS") and given the name by the Conference of European Postal and Telecommunication Administration ("CEPT"). E-l carries signals at 2.048 Mbps (32 channels at 64Kbps). "E-3" is a European digital transmission format devised by the ITU-TS and given the name by the CEPT. E-3 carries 16 E-l signals with a data rate of 34.368 Mbps. "Full Circuit IPL Service" means a Circuit whereby both local and foreign-end international Circuits are provided by Supplier and/or its affiliates. "Half Circuit IPL Service" means a Circuit whereby Supplier provides domestic-end half-Circuit and Customer, or Customer's end user, coordinates and procures matching half-Circuits directly from the foreign-end carrier. "International Circuit" means an E-1, X-0, XXX0, XXX0, XX-x, XX-0, OC-3c, or an OC-12. A Circuit shall be considered an "International Circuit" if at any time it is operational outside the domestic United States of America, regardless of the origination and/or termination of the signal. All such International Circuits shall be considered a part of "International Service." An "OC-3c" is a signal based on the SONET frame structure as specified in Bellcore OR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI Tl.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-12c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI Tl.I05, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-12c Unprotected (1±0)"—622.08 megabits Lambda—is the ANSI SONET transmission standard for high capacity optical telecommunications with line rate of 622.08 Mbps in unprotected configuration, as specified in Bellcore GR-253-CORE. An "OC...
Sample 1

Related to Circuit Mileage

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Circuit Breaker means a device, capable of making and breaking the circuit under all conditions, and unless otherwise specified, so designed as to break the current automatically under abnormal conditions;

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Satellite means any satellite owned by the Issuer or any of its Restricted Subsidiaries and any satellite purchased by the Issuer or any of its Restricted Subsidiaries pursuant to the terms of a Satellite Purchase Agreement, whether such satellite is in the process of manufacture, has been delivered for launch or is in orbit (whether or not in operational service).

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Electrical circuit means an assembly of connected live parts which is designed to be electrically energized in normal operation.

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Generation Interconnection Customer means an entity that submits an Interconnection Request to interconnect a new generation facility or to increase the capacity of an existing generation facility interconnected with the Transmission System in the PJM Region.

  • Electric generation service means the provision of retail

  • Switch means a switching device employed by a Carrier within the Public Switched Network. Switch includes but is not limited to End Office Switches, Tandem Switches, Access Tandem Switches, Remote Switching Modules, and Packet Switches. Switches may be employed as a combination of End Office/Tandem Switches. "Switched Access Service" means the offering of transmission and switching services to Interexchange Carriers for the purpose of the origination or termination of telephone toll service. Switched Access Services include: Feature Group A, Feature Group B, Feature Group D, 8XX access, and 900 access and their successors or similar Switched Access Services. "Switched Access Traffic" is traffic that originates at one of the Party's End User Customers and terminates at an IXC Point of Presence, or originates at an IXC Point of Presence and terminates at one of the Party's End User Customers, whether or not the traffic transits the other Party's network.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Customer-generator means a user of a net metering system.

  • Planned External Financed Generation Capacity Resource means a Planned External Generation Capacity Resource that, prior to August 7, 2015, has an effective agreement that is the equivalent of an Interconnection Service Agreement, has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close, and has secured at least 50 percent of the MWs of firm transmission service required to qualify such resource under the deliverability requirements of the Reliability Assurance Agreement.

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • Software Upgrade means a release of Software, in object code form, or firmware, which adds new functionality and feature enhancements to the Software or Equipment. Kodak software releases that are designated as Software Upgrade will be identified A.B.x where the A &B designates the release as a Software Upgrade.

  • Furniture maintenance product means a wax, polish, conditioner or any other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors but does not include dusting aids, wood cleaners, products designed solely for the purpose of cleaning and products designed to leave a permanent finish such as stains, sanding sealers and lacquers.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.