Reserved Volumes definition

Reserved Volumes shall have the meaning set out in Exhibit 1.
Reserved Volumes shall have the meaning ascribed to it in the General Terms.
Reserved Volumes shall have the meaning set out in Appendix 2 Volume Planning Procedures for a period of the immediately subsequent [***]calendar years [***]as decided by the Steering Committee. “Steering Committee” means the first level of governance forum for handling the co- operation between the Parties regarding [***] Vehicle in various matters, under this Manufacturing Agreement which regarding cooperation between the Parties is the so called Geely and Polestar 417 Steering Committee. “Strategic Board” means the highest level governance forum established by the Parties for handling the cooperation between the Parties regarding [***] Vehicle in respect of various matters. “Systematic Defect” means a Defect attributable to the same, or substantially the same, root cause that occurs, or is likely to occur, at a statistically significant level. A single Minor Defect will not be deemed a Systematic Defect, provided however that multiple Minor Defects may, when considered collectively on impact level, be deemed a Systematic Defect. Similarly, a few major Defects may be sufficient to qualify as Systematic Defects. "Technical Information" means all Technical Specification and Know-How and all other written or printed technical information or software stored in any media or materials or prototypes communicated to the Supplier by the Buyer and all reproductions, excerpts and summaries thereof, and all modifications and/or improvements to the Technical Specification and Know-How made by or for the Supplier. “Technical Specification” means (i) all the required vehicle specifications as agreed between GRI and Buyer that are necessary to manufacture the Vehicle and are provided to the Supplier by GRI as set forth in Section 4 and (ii) all other written or printed technical information or software stored in any media or materials or prototypes communicated to the Supplier by the Buyer (or by GRI on behalf of the Buyer) and all reproductions, excerpts and summaries thereof as agreed between the parties and confirmed by the Plant (which confirmation should not be unreasonably withheld or delayed), and all modifications and/or improvements thereof made by or for the Supplier pursuant to the change management process. Examples are necessary product drawings, material lists, assembly instructions and quality requirements on paper or in electronic form provided by GRI to the Supplier for the purpose of manufacture the Vehicle in accordance with the terms and conditions of this Manufactur...

Examples of Reserved Volumes in a sentence

  • Furthermore, the Buyer agree to hold the Supplier and the Luqaio Steering Committee informed of its long term plans for production of Contract Products in the Plant beyond the [***] period that concerns its Reserved Volumes.

  • The Company can therefore not assume any warranty or liability for the functionality and constant availability of the internet services used, the third-party network elements used, the image and sound transmission, or access to the AGM portal and its general availability.

  • If Seller sends Buyer a Seller Termination Notice, Buyer shall no longer be required to purchase any Products from such Plant and the Reserved Volumes and Take-or-Pay Minimums shall be adjusted accordingly.

  • The Buyer is responsible for its Reserved Volumes, meaning that if the Buyer does not utilize its Reserved Volumes, it shall in any event be responsible for any fixed and variable costs related to such un-utilized Reserved Volumes that could not be mitigated.


More Definitions of Reserved Volumes

Reserved Volumes shall have the same meaning as defined in the applicable [***]Manufacturing Agreement (PS22-049, PS22-050, PS22-052). “Restricted Party” means a person that is: (i) listed on, or owned or controlled by a person listed on, or acting on behalf or at the direction of, a person listed on, any Sanctions List; (ii) Agreement no.: PS22-048 4(19) located in, incorporated under the laws of, or owned or (directly or indirectly) controlled by, or acting on behalf of, a person located in or organised under the laws of a Sanctioned Territory; or (iii) otherwise a target of Sanctions ("target of Sanctions" signifying a person with whom the Parties, respectively under applicable law, would be prohibited or restricted by Sanctions from engaging in trade, business or other activities). "Sanctioned Party" means, at any time, an individual or entity that is: (a) any person specifically listed in any Sanctions List; or (b) any person controlled or owned by any such person referred to in (a) above. “Sanctioned Territory” means a country, region or territory that is the subject of comprehensive country-wide, region-wide or territory-wide Sanctions, or whose government is the target of comprehensive Sanctions. “Sanctions” means the economic or financial sanctions laws, regulations, trade embargoes, export controls or other restrictive measures enacted, administered, implemented and/or enforced from time to time by the United Nations Security Council, the United States of America, the United Kingdom, the Europe and Union and/or member state of the European Union, the Kingdom of Norway, the respective governmental institutions and agencies of any of the foregoing which are duly appointed, empowered or authorized to enact, administer, implement and/or enforce Sanctions, including, without limitation, the Office of Foreign Assets Control of the US Department of Treasury (OFAC), the United States Department of State, and Her Majesty's Treasury (HMT), and other governmental institution or agency with responsibility for imposing, administering or enforcing Sanctions with jurisdiction over the Parties or performance of this Agreement. “Sanctions Authority” means: (a) the United Nations Security Council; (b) the United States of America; (c) the United Kingdom; (d) the European Union and/or a member state of the European Union; (e) the Kingdom of Norway; (f) the respective governmental institutions and agencies of any of the foregoing which are duly appointed, empowered or authorized to ...
Reserved Volumes shall have the meaning set out in Appendix 2 Volume Planning Procedures for a period of the immediately subsequent [***] calendar years [***] as decided by the Steering Committee.
Reserved Volumes means two million four hundred thousand (2,400,000) Barrels of Product (one million, five hundred thousand (1,500,000) Barrels of Ethane-Propane Mix and nine hundred thousand (900,000) Barrels of Purity Ethane.

Related to Reserved Volumes

  • Committed Volume means, with respect to a Committed Shipper, the minimum daily volume of Crude Petroleum set out in Schedule A to the Committed Shipper’s TSA.

  • Runoff volume means the volume of water that runs off the land development project from a prescribed storm event.

  • Service Volume means a measure of Services for which a Performance Target is set.

  • Contract Quantity means the quantity of Delivered Energy expected to be delivered by Seller during each Contract Year as set forth in the Cover Sheet.

  • Monthly Volume means the product of the Committed Volume multiplied by the number of days in the relevant month.

  • PJM Region Peak Load Forecast means the peak load forecast used by the Office of the Interconnection in determining the PJM Region Reliability Requirement, and shall be determined on both a preliminary and final basis as set forth in Tariff, Attachment DD, section 5.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Type A quantity means a quantity of radioactive material, the aggregate radioactivity of which does not exceed A1 for special form radioactive material or A2 for normal form radio- active material, where A1 and A2 are given in Appendix O or may be determined by procedures described in Appendix O.

  • Type B quantity means a quantity of radioactive material greater than a Type A quantity.

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Daily Contract Quantity or “DCQ” means the quantity of Gas as set out in Clause 4.1 herein.

  • Throughput means the measure of production, or factor related to production, used to determine the relationship between the amount of energy used by the target unit and the levels of activity of the target unit, as set out in Schedule 6 to an underlying agreement; “the Tribunal” means the First-tier Tribunal established under the Xxxxxxxx Xxxxxx xxx Xxxxxxxxxxx Xxx 00000;

  • Daily Quantity means the quantity of waste discharged during an operating day.

  • Gross Standard Volume as herein used means volume corrected to a temperature of sixty degrees (60°) Fahrenheit, in accordance with the latest API/ASTM measurement standards, and at equilibrium vapor pressure.

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.

  • Delivery Point means the point(s) of connection(s) at which energy is delivered into the Grid System i.e. the Interconnection Point.

  • Required Quantity in a unit price Contract shall mean the actual quantity of any item of Work or materials which is required to be performed or furnished in order to comply with the Contract.

  • Spent fuel means any fuel element or fuel component, solid or liquid, which has been used or exposed to radiation in a nuclear reactor;

  • VWAP Purchase Share Volume Maximum means a number of shares of Common Stock traded on the Principal Market during normal trading hours on the VWAP Purchase Date equal to: (i) the VWAP Purchase Share Estimate, divided by (ii) the VWAP Purchase Share Percentage (to be appropriately adjusted for any reorganization, recapitalization, non-cash dividend, stock split, reverse stock split or other similar transaction).

  • MDQ means the total maximum MMBtu which Company shall be obligated to receive or deliver on a firm basis on any given day on behalf of customer.

  • Volume Commitment means the volume of NGLs that a Committed Shipper has guaranteed to ship on the Pipeline pursuant to its TSA.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Receipt Point(s) means the receipt points set forth in Section 6 of this Toll Schedule.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.