Electronic Data Protocol Sample Clauses

Electronic Data Protocol. 7.3.1 The parties acknowledge that Electronic Data may be altered or corrupted, intentionally or otherwise, due to occurrences beyond their reasonable control or knowledge, including but not limited to compatibility issues with user software, manipulation by the recipient, errors in transcription or transmission, machine error, environmental factors, and operator error. Consequently, the parties understand that there is some level of increased risk in the use of Electronic Data for the communication of design and construction information and, in consideration of this, agree, and shall require their independent contractors, Subcontractors and Design Consultants to agree, to the following protocols, terms and conditions set forth in this Section 7.3. 7.3.2 Electronic Data will be transmitted in the format agreed upon in Section 7.2.1 above, including file conventions and document properties, unless prior arrangements are made in advance in writing. 7.3.3 The Electronic Data represents the information at a particular point in time and is subject to change. Therefore, the parties shall agree upon protocols for notification by the author to the recipient of any changes which may thereafter be made to the Electronic Data, which protocol shall also address the duty, if any, to update such information if such information changes prior to Final Completion. 7.3.4 The transmitting party specifically disclaims all warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with respect to the media transmitting the Electronic Data. However, transmission of the Electronic Data via electronic means shall not invalidate or negate any duties pursuant to the applicable standard of care with respect to the creation of the Electronic Data, unless such data is materially changed or altered after it is transmitted to the receiving party, and the transmitting party did not participate in such change or alteration.
Sample 1Sample 2Sample 3See All (21)
AutoNDA by SimpleDocs
Electronic Data Protocol. 12.3.1 The parties acknowledge that Electronic Data may be altered or corrupted, intentionally or otherwise, due to occurrences beyond their reasonable control or knowledge, including but not limited to compatibility issues with user software, manipulation by the recipient, errors in transcription or transmission, machine error, environmental factors, and operator error. Consequently, the parties understand that there is some level of increased risk in the use of Electronic Data for the communication of design and construction information and, in consideration of this, agree, and shall require their independent contractors, Subcontractors and Design Consultants to agree, to the following protocols, terms and conditions set forth in this Section 12.3. 12.3.2 Electronic Data will be transmitted in the format agreed upon in Section 12.2.1 above, including file conventions and document properties, unless prior arrangements are made in advance in writing.
Sample 1
Electronic Data Protocol. 15.3.1 The parties acknowledge that Electronic Data may be altered or corrupted, intentionally or otherwise, due to occurrences beyond their reasonable control or knowledge, including but not limited to compatibility issues with user software, manipulation by the recipient, errors in 15.3.2 Electronic Data will be transmitted in the format determined in Section 15.2.1 above, including file conventions and document properties, unless prior arrangements are made in advance in writing. 15.3.3 The Electronic Data represents the information at a particular point in time and is subject to change. Therefore, the parties shall agree upon protocols for notification by the author to the recipient of any changes which may thereafter be made to the Electronic Data, which protocol shall also address the duty, if any, to update such information if such information changes prior to Final Completion of the Project. 15.3.4 The transmitting party specifically disclaims all warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with respect to the media transmitting the Electronic Data. However, transmission of the Electronic Data via electronic means shall not invalidate or negate any duties pursuant to the applicable standard of care with respect to the creation of the Electronic Data, unless such data is materially changed or altered after it is transmitted to the receiving party, and the transmitting party did not participate in such change or alteration.
Sample 1
Electronic Data Protocol. 8.3.1. The parties acknowledge that Electronic Data may be altered or corrupted, intentionally or otherwise, due to occurrences beyond their reasonable control or knowledge, including but not limited to compatibility issues with user software, manipulation by the recipient, errors in transcription or transmission, machine error, environmental factors, and operator error. Consequently, the parties understand that there is some level of increased risk in the use of Electronic Data for the communication of design and construction information and, in consideration of this, agree, and shall require their independent contractors, Subcontractors and Design Consultants to agree, to the following protocols, terms and conditions set forth in this Section 8.3. 8.3.2. Electronic Data will be transmitted in the format agreed upon in Paragraph 8.2.1 above, including file conventions and document properties, unless prior arrangements are made in advance in writing. 8.3.3. The Electronic Data represents the information at a particular point in time and is subject to change. Therefore, the parties shall agree upon protocols for notification by the author to the recipient of any changes which may thereafter be made to the Electronic Data, which protocol shall also address the duty, if any, to update such information, data or other information contained in the electronic media if such information changes prior to Final Completion of the Project. 8.3.4. The transmitting party specifically disclaims all warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with respect to the media transmitting the Electronic Data. However, transmission of the Electronic Data via electronic means shall not invalidate or negate any duties pursuant to the applicable standard of care with respect to the creation of the Electronic Data, unless the Electronic Data in question is materially changed or altered after it is transmitted to the receiving party, and the transmitting party did not participate in such change or alteration and the change or alteration causes or results in damage or defect to the Project.
Sample 1
Electronic Data Protocol. A. The parties acknowledge that Electronic Data may be altered or corrupted, intentionally or otherwise, due to occurrences beyond their reasonable control or knowledge, including but not limited to compatibility issues with user software, manipulation by the recipient, errors in transcription or transmission, machine error, environmental factors, and operator error. Consequently, the parties understand that there is some level of increased risk in the use of Electronic Data for the communication of design and construction information and, in consideration of this, agree, and shall require their independent contractors, Subcontractors and Design Consultants to agree, to the following protocols, terms and conditions set forth in this Section 12.3. B. Electronic Data will be transmitted in the format agreed upon in Section 12.2.A above, including file conventions and document properties, unless prior arrangements are made in writing. C. The Electronic Data represents the information at a particular point in time and is subject to change. Therefore, the parties shall agree upon protocols for notification by the author to the recipient of any changes which may thereafter be made to the Electronic Data, which protocol shall also address the duty, if any, to update such information, data or other information contained in the electronic media if such information changes prior to Final Completion of the Project.
Sample 1
Electronic Data Protocol. 11.3.1 The parties acknowledge that Electronic Data may be altered or corrupted, intentionally or otherwise, due to occurrences beyond their reasonable control or knowledge, including but not limited to compatibility issues with user software, manipulation by the recipient, errors in transcription or transmission, machine error, environmental factors, and operator error. Consequently, the parties understand that there is some level of increased risk in the use of Electronic Data for the communication of design and construction information and, in consideration of this, agree, and shall require their independent contractors, Subcontractors and 11.3.2 Electronic Data will be transmitted in the format agreed upon in GC 11.2.1, including file conventions and document properties, unless prior arrangements are made in advance in writing. 11.3.3 The Electronic Data represents the information at a particular point in time and is subject to change. Therefore, the parties shall agree upon protocols for notification by the author to the recipient of any changes which may thereafter be made to the Electronic Data, which protocol shall also address the duty, if any, to update such information, data or other information contained in the electronic media if such information changes prior to Final Completion of the Project. 11.3.4 The transmitting party specifically disclaims all warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, with respect to the media transmitting the Electronic Data. However, transmission of the Electronic Data by electronic means shall not invalidate or negate any duties pursuant to the applicable standard of care with respect to the creation of the Electronic Data, unless such data is materially changed or altered after it is transmitted to the receiving party, and the transmitting party did not participate in such change or alteration. ATTACHMENT E INDEMNITY, INSURANCE & BONDING
Sample 1

Related to Electronic Data Protocol

  • Electronic Data 7.1.1 The parties recognize that Contract Documents, including drawings, specifications and three-dimensional modeling (such as Building Information Models) and other Work Product may be transmitted among Owner, Design-Builder and others in electronic media as an alternative to paper hard copies (collectively “Electronic Data”).

  • Electronic Data Interchange If both Parties elect to facilitate business activities hereunder by electronically sending and receiving data in agreed formats (also referred to as Electronic Data Interchange or “EDI”) in substitution for conventional paper-based documents, the terms and conditions of this Agreement shall apply to such EDI activities.

  • Electronic Data Interchange (EDI This standard establishes the data contents of the Invoice Transaction Set (810) for use within the context of an EDI environment. This transaction set can be used for invoicing via the AN for catalog and non-catalog goods and services.

  • Electronic Devices No electronic devices that may hinder job performance or safety (especially cell phones), may be carried on employees’ person, or be used by employees during working hours.

  • ELECTRONIC WORKFLOW SYSTEM OGS reserves the right to incorporate an electronic workflow system that may include elements of the Authorized User RFQ process. OGS reserves the right to post Authorized User Contract usage of Centralized Contracts. For Lot 4 only, when provided for in the RFQ and resultant Authorized User Agreement, the Authorized Users may reimburse travel expenses. All rules and regulations associated with this travel can be found at xxxx://xxx.xxxxx.xx.xx/agencies/travel/travel.htm. In no case will any travel reimbursement be charged that exceeds these rates. All travel will be paid only as specified within the Authorized User Agreement and must be billed with the associated services on the same Invoice with receipts attached. The Contractor shall receive prior approval from the Authorized User for any travel that occurs during the term of an Authorized User Agreement. Parking fees and/or parking tickets shall not be paid by an Authorized User. Unless otherwise specified in writing by the Authorized User, a vehicle will not be provided by Authorized User to the Contractor for travel. Therefore, the Contractor will be responsible for ensuring that the Contractor has access to an appropriate vehicle (e.g., personal vehicle or rental vehicle) or common carrier with which to carry out any necessary travel. For the Contractor to obtain reimbursement for the use of a rental vehicle, such use must be justified as the most cost- effective mode of transportation under the circumstances (including consideration of the most effective use of time). The Contractor is responsible for keeping adequate records to substantiate any claims for travel reimbursement. All services provided under the resultant Authorized User Agreement must be performed within CONUS. There are no BONDS for this Contract. However, an Authorized User may require in an RFQ a performance, payment or Bid bond, or negotiable irrevocable letter of credit or other form of security for the faithful performance for the resultant Authorized User Agreement. Pursuant to New York State Executive Law Article 15-A and Parts 140-145 of Title 5 of the New York Codes, Rules and Regulations (“NYCRR”), the New York State Office of General Services (“OGS”) is required to promote opportunities for the maximum feasible participation of New York State-certified Minority- and Women-owned Business Enterprises (“MWBEs”) and the employment of minority group members and women in the performance of OGS contracts.

  • Electronic Access Access by the Customer to certain systems, applications or products of Bank shall be governed by this Agreement and the terms and conditions set forth in Annex A Electronic Access.

  • ELECTRONIC SUBMISSIONS Concessionaire must have the capacity to send and receive electronic submissions and communications as a pre-condition and continuing requirement of this Agreement. For purposes of this Agreement, “Electronic Submissions” shall only include the transmission of documents by email. Concessionaire shall comply with the following terms and conditions: A. Concessionaire shall electronically submit all reports, including, but not limited to, Monthly Reports and Annual Reports as described in Paragraphs 12 and 13, by email to: XxxxxxxxXxxxxx@xxx.xx.xxx. Failure on the part of Concessionaire to submit reports electronically shall be a material breach of this Agreement, subject to Suspension of Operations and/or Termination in accordance with the terms and conditions set forth in Paragraphs 9 and 10. B. Concessionaire shall maintain and monitor on a daily basis an active email address, designated for this Agreement and report any change to the email address during any Term of this Agreement. Failure on the part of Concessionaire to maintain and monitor the active email address, designated for this Agreement, shall be a material breach of this Agreement, subject to Suspension of Operations and/or Termination in accordance with the terms and conditions set forth in Paragraphs 9 and 10.

  • Electronic Records You acknowledge and agree that we may in our discretion store all records electronically; and that we will not retain and have no obligation to retain any original documents for any period of time. This applies to all documentation including but not limited to checks, transaction records, notes, mortgages, deeds of trust and other loan and/or security documentation. We will routinely destroy all original documentation. We may store records electronically via imaging, scanning, filming or other technology used in the financial services industry for the storage of documentation via internal processes or third-party processors that we approve for these services. You agree that such storage shall be secure, and further agree that such records shall for all purposes be recognized and admissible in evidence or otherwise to prove the agreements, rights and obligations of the parties pursuant to any such records.

  • Electronic Documents We may make periodic statements, disclosures, notices, and other documents available to you electronically, and, subject to any delivery and receipt verification procedures required by law, you agree to receive such documents electronically and to check the statements for accuracy. If you believe any such statement contains incorrect information, you must follow the procedures set forth in the Related Agreement(s).

  • Electronic Information Each Member hereby agrees that all current and future notices, confirmations and other communications may be made by the Company via email, sent to the email address of record of the Member provided to the Company as changed or updated from time to time, without necessity of confirmation of receipt, delivery or reading, and such form of electronic communication is sufficient for all matters regarding the relationship between the Company and the Members except as otherwise required by law. If any such electronically sent communication fails to be received for any reason, including but not limited to such communications being diverted to the recipients spam filters by the recipients email service provider, or due to a recipient’s change of address, or due to technology issues by the recipients service provider, the parties agree that the burden of such failure to receive is on the recipient and not the sender, and that the sender is under no obligation to resend communications via any other means, including but not limited to postal service or overnight courier, and that such communications shall for all purposes, including legal and regulatory, be deemed to have been delivered and received. Except as required by law, no physical, paper documents will be sent to Members, and a Member desires physical documents then such Member agrees to be satisfied by directly and personally printing, at such Member’s own expense, the electronically sent communication(s) and maintaining such physical records in any manner or form that a Member desires.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!