General Maxiflex Provisions Sample Clauses

General Maxiflex Provisions a. An employee may be granted no more than 8 hours of leave in a workday. b. Non-worked holidays are credited at a maximum of an 8-hour day and recorded as holiday leave. c. Credit hours must be earned prior to use and be available in an amount necessary to cover requested time off. d. Employees may substitute accumulated credit hours for leave used during the current pay period. e. Employees with supervisory approval may earn credit hours later in a day in which leave is taken. f. After the start of the work day, employees with supervisory approval may flex out and back in during work hours without charge to leave or credit hours provided sufficient time remains during the day to later complete the work day requirement. g. If circumstances allow, and the supervisor approves, employees may be allowed to work Maxiflex during periods of training or at a TDY site. In these situations, the actual hours spent in training will be counted toward the BWR on an hour for hour basis. h. Under Maxiflex, the timesheet is to identify start and stop times and other entries such as lunch period, leave, fitness time, telework, credit hours earned and used, overtime, etc. Employees will timely record all inputs and normally submit the completed timesheet by noon (1200 hours) of the last workday of the pay period. Employees shall estimate start and stop times for input occurring after submission of the time sheet. In such instances, timesheet corrections will be made for later changes that impact leave or credit hours. i. In cases of abuse and consistent with the MLA, a supervisor may immediately suspend an employee’s Maxiflex privileges and will provide the reason in writing.
Sample 1
AutoNDA by SimpleDocs

Related to General Maxiflex Provisions

  • SAFETY PROVISIONS It is the essence of this Order that all Services to be performed by Seller shall be done in a safe and good workmanlike manner, free of any accidents. Accordingly, Seller shall promulgate, maintain, and enforce appropriate safety and health rules and procedures (including training) with respect to its personnel and the Work to be performed hereunder, which rules and procedures at a minimum shall be the equivalent of or exceed applicable Buyer safety and health rules. All Services performed hereunder shall fully comply with all lawful governmental safety and health requirements, including the rules and standards established by the Occupational Safety and Health Act of 1970 ("OSHA"), as amended, and any other applicable federal, state and/or local safety or health laws, rules or regulations. Any equipment provided by Buyer to Seller for the benefit of Seller's employees or those of its subcontractors shall be at the sole risk and liability of Seller to make sure that such equipment is fit for the use intended and is in proper working order. XXXXXX AGREES TO INDEMNIFY (INCLUDING ATTORNEYS' FEES) DEFEND, AND TO SAVE HARMLESS BUYER FROM ANY AND ALL CLAIMS OF SELLER, SELLER’S SUBCONTRACTORS, AND THEIR EMPLOYEES ARISING OUT OF THE USE OF ANY EQUIPMENT FURNISHED BY BUYER OR ADVICE GIVEN BY BUYER RELATING TO SUCH EQUIPMENT, TO THE FULLEST EXTENT ALLOWED BY LAW, IT BEING UNDERSTOOD THAT BUYER SHALL NOT BE LIABLE UNDER LAW, CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE. Seller shall maintain a drug and alcohol-free workforce at all times while on Xxxxx's premises/location. Upon Xxxxx's request, Seller shall provide Buyer with a copy of all accident reports prepared by or submitted to Seller, including all OSHA illness and injury reports.

  • Geographic Area and Sector Specific Allowances, Conditions and Exceptions The following allowances and conditions shall apply where relevant. Where the Employer does work which falls under the following headings, the Employer agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.

  • EEO Provisions During the performance of this Contract the Contractor agrees as follows: (1) The Contractor shall not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. The Contractor shall take affirmative action to insure that applicants are employed and that employees are treated equally during employment, without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. Such action shall include but not be limited to the following: employment, upgrading, demotion, transfer, recruitment or advertising, layoff or termination, rates of pay or other forms of compensation, and selection for training, including apprenticeship. The Contractor shall post in conspicuous places, available to employees and applicants for employment, notices setting forth these EEO provisions. (2) The Contractor shall in all solicitations or advertisement for employees placed by or on behalf of the Contractor, state that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. (3) The Contractor shall send a copy of the EEO provisions to each labor union or representative of workers with which it has a collective bargaining agreement or other contract or understanding. (4) In the event of the Contractor's noncompliance with these EEO provisions, the City may cancel, terminate, or suspend this contract, in whole or in part, and the City may declare the Contractor ineligible for further City contracts. (5) Unless exempted by the City Council of the City of Durham, the Contractor shall include these EEO provisions in every purchase order for goods to be used in performing this contract and in every subcontract related to this contract so that these EEO provisions will be binding upon such subcontractors and vendors.

  • Scheduling Provisions The scheduling and premium provisions relating to consecutive weekends off in Article 16 do not apply to employees who accept positions under this provision.

  • Remaining Provisions Except as expressly modified by this Amendment, the Employment Agreement shall remain in full force and effect. This Amendment embodies the entire agreement and understanding of the parties hereto with respect to the subject matter hereof, and supersedes all prior and contemporaneous agreements and understandings, oral or written, relative thereto.

  • Final Provisions Clause 16

  • CLOSING PROVISIONS (a) Subscriber agrees to be identified as a customer of JetBrains and agrees that JetBrains may refer to Subscriber by name, trade name and trademark, if applicable, and may briefly describe Subscriber’s business in JetBrains marketing materials, on JetBrains Site, and in public or legal documents. Subscriber hereby grants JetBrains a worldwide, non- exclusive, royalty-free license to use Subscriber’s name and any of Subscriber’s trade names and trademarks solely pursuant to this marketing section. (b) This Agreement is governed by the laws of the Czech Republic. All disputes arising from the present Agreement and/or in connection with it shall be finally brought to and decided by any relevant competent common court in the Czech Republic. The parties agree that the United Nations Convention on Contracts for the International Sale of Goods does not apply to this Agreement. (c) JetBrains may modify this Agreement at any time by posting a revised version of the Agreement on JetBrains Site. The modified terms will become effective upon posting of a revised version of the Agreement on JetBrains Site. By continuing to use Service after the effective date of any modification to this Agreement, Subscriber agrees to be bound by the modified terms. It is Subscriber’s responsibility to check JetBrains Site regularly for modifications to this Agreement. (d) The parties are independent contractors. This Agreement does not create a partnership, franchise, joint venture, agency, or a fiduciary or employment relationship between the parties. (e) Sections 7, 8, 9, 10, 12 (c), 12(d), 14(a), 14(b), and 14(c) shall survive any termination or expiration of this Agree- ment. (f) There are no third-party beneficiaries to this Agreement. (g) If any provision of this Agreement is held by a court of competent jurisdiction to be contrary to law, the provision shall be modified by the court and interpreted so as best to accomplish the objectives of the original provision to the fullest extent permitted by law, and the remaining provisions of this Agreement shall remain in effect.

  • Testing Procedure Limitations The Asset Representations Reviewer will only be required to perform the testing procedures listed under “Tests” in Schedule A, and will have no obligation to perform additional procedures on any Subject Lease or to provide any information other than a Review Report indicating for each Subject Lease whether there was a Test Pass or a Test Fail for each Test, or whether the Subject Lease was a Test Complete and the related reason. However, the Asset Representations Reviewer may provide additional information about any Subject Lease that it determines in good faith to be material to the Review.

  • Requirements Pertaining Only to Federal Grants and Subrecipient Agreements If this Agreement is a grant that is funded in whole or in part by Federal funds:

  • Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!