INSPECTIONS & TESTING Sample Clauses

INSPECTIONS & TESTING. Xxxxxxx County reserves the right to inspect any item(s) or service location for compliance with specifications and requirements and needs of the user department. If an Offeror cannot furnish a sample of a proposed item, where applicable, for review, or fails to satisfactorily show an ability to perform, the County can reject the response as inadequate.
Sample 1Sample 2Sample 3See All (17)
AutoNDA by SimpleDocs
INSPECTIONS & TESTING. Seller’s customary inspections and tests apply to the Purchase Order. The cost of any non-customary inspections and/or tests, if requested by Purchaser, shall be paid by the Purchaser. All inspections and test shall be conducted at Seller’s facilities.
Sample 1Sample 2
INSPECTIONS & TESTING. 7.1 An acceptance test will be performed in the facilities of the Seller, before the delivery of the Product or, whether differently decided by the Parties, after the placement of the Product in the facilities of the Buyer. This Acceptance test shall be reported at the presence of the Parties. If the tests are performed in the seller site, the Seller shall communicate the Buyer the date in which the Product will be ready for the Acceptance test with 7 days of notice. If the Buyer decides not to be present at the Acceptance test, this will be done in absence of the Buyer. If the tests are performed in the Buyer site, the Acceptance test shall be w 10 days from the delivery or from acceptance test shall be performed. If the Buyer will not provide for the acceptance test within the above mentioned term, the Product will be considered accepted, compliant with all the technical specifications and defect free. 7.2 Whenever the Acceptance test would give negative outcome, the Seller shall remedy the non- conformity and set a new Acceptance test. When the Acceptance test gives positive outcome, the Parties draft and sign a written report. 7.3 With the sign of the Acceptance test, the Product is considered by the Parties compliant with the Technical Specifications and defect-free.
Sample 1
INSPECTIONS & TESTING. (a) The Company shall permit Approved Representatives and Consultants to visit and inspect any of the offices or properties of the Company (including the Project) to (i) witness any performance tests and (ii) examine all its books of account, records, reports and other papers, to make copies and extracts therefrom, and to discuss the affairs, finances and accounts of the Company with the Company’s officers and independent public accountants (and by this provision the Company authorizes said accountants to discuss the affairs, finances and accounts of the Company), all at such times and as often as may be reasonably requested. (b) Notwithstanding any provision of any Shareholder Financing Document to the contrary, the reasonable and documented costs and expenses of each such visit by the Approved Representatives and Consultants shall be borne by the Company; provided that, absent the occurrence and continuance of an Event of Default, such visits of the Approved Representatives and Consultants at the expense of the Company shall not occur more frequently than once per calendar year.
Sample 1
INSPECTIONS & TESTING. Subcontractor shall assist, coordinate, and provide access for inspections and testing that is performed by testing and inspection agencies with respect to Subcontractor’s Work. Subcontractor shall be responsible for securing and paying for all permits, licenses, escrows and inspection fees necessary for the Subcontractor’s Work (other than the building permit to be obtained by Contractor or Owner).
Sample 1
INSPECTIONS & TESTING. Buyer shall have reasonable access to the Property during the term of this Agreement for the purpose of conducting surveys, architectural, engineering, geotechnical and environmental inspections and tests, and any other physical inspections, studies, or tests reasonably required by Buyer (collectively, the “Inspections”) with respect to the Property. Unless otherwise agreed in writing by Seller, such access shall be during normal business hours and upon prior written notice (or verbal notice wherein Buyer actually speaks with a representative of Seller [not a voicemail message] with written notice delivered immediately thereafter, if requested at such time) to Seller. Such access shall not unreasonably interfere with Seller’s use of the Property and the access to certain areas of the Property may be conditioned upon the execution of a reasonable form of non-disclosure agreement by Buyer or its representatives. Buyer shall maintain for itself and on behalf of its consultants and contractors, or Buyer shall maintain and shall ensure that its agents, consultants and contractors maintain, public liability and property damage insurance insuring against any liability arising out of any entry, tests or investigations of the Property pursuant to the provisions hereof. Such insurance maintained by Buyer and/or its consultants, agents and contractors (as applicable) shall be in the amount of Two Million Dollars ($2,000,000.00) combined single limit for injury to or death of one or more persons in an occurrence, and for damage to tangible property (including loss of use) in an occurrence. The policy maintained by Buyer shall insure the contractual liability of Buyer covering the indemnities herein and shall (i) name the Seller and its successors, assigns and affiliates as additional insureds, (ii) contain a cross-liability provision, and (iii) contain a provision that “the insurance provided by Buyer hereunder shall be primary and non-contributing with any other insurance available to Seller.” Buyer shall provide Seller with evidence of such insurance coverage prior to any entry, tests or investigations of the Property. The aforementioned insurance coverage may be obtained under a blanket policy carried by Buyer or its agents, consultants or contractors, as the case may be. Notwithstanding the foregoing, Buyer shall not be permitted to undertake any intrusive or destructive testing of the Property, including without limitation a “Phase II” environmental assessment, (...
Sample 1

Related to INSPECTIONS & TESTING

  • Inspection/Testing In order to assess Supplier’s work quality and/or compliance with this Order, upon reasonable notice by Buyer: (a) all goods, materials and services related to the items purchased hereunder, including, raw materials, components, assemblies, work in process, tools and end products shall be subject to inspection and testing by Buyer, its customer, representative or regulatory authorities at all places, including sites where the goods are made or located or the services are performed, whether at Supplier’s premises or elsewhere; and (b) all of Supplier’s facilities, books and records relating to this Order shall be subject to inspection by Buyer or its designee. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Supplier shall notify Buyer in writing at least twenty (20) days prior to each of Supplier’s scheduled final and, if applicable, intermediate test/inspection/witness points. Supplier agrees to cooperate with such/audit inspection including, completing and returning questionnaires and making available its knowledgeable representatives. Buyer’s failure to inspect or test goods, materials or services or Buyer’s failure to reject or detect defects by inspection or testing shall not relieve Supplier from its warranty obligations or any of its other obligations or responsibilities under this Order. Supplier agrees to provide small business as well as minority and/or women owned business utilization and demographic data upon request.

  • Equipment Testing and Inspection 2.1.1 The Interconnection Customer shall test and inspect its Small Generating Facility and Interconnection Facilities prior to interconnection. The Interconnection Customer shall notify the NYISO and the Connecting Transmission Owner of such activities no fewer than five Business Days (or as may be agreed to by the Parties) prior to such testing and inspection. Testing and inspection shall occur on a Business Day. The Connecting Transmission Owner may, at its own expense, send qualified personnel to the Small Generating Facility site to inspect the interconnection and observe the testing. The Interconnection Customer shall provide the NYISO and Connecting Transmission Owner a written test report when such testing and inspection is completed. The Small Generating Facility may not commence parallel operations if the NYISO, in consultation with the Connecting Transmission Owner, finds that the Small Generating Facility has not been installed as agreed upon or may not be operated in a safe and reliable manner. 2.1.2 The NYISO and Connecting Transmission Owner shall each provide the Interconnection Customer written acknowledgment that it has received the Interconnection Customer’s written test report. Such written acknowledgment shall not be deemed to be or construed as any representation, assurance, guarantee, or warranty by the NYISO or Connecting Transmission Owner of the safety, durability, suitability, or reliability of the Small Generating Facility or any associated control, protective, and safety devices owned or controlled by the Interconnection Customer or the quality of power produced by the Small Generating Facility.

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Random Testing Notwithstanding any provisions of the Collective Agreement or any special agreements appended thereto, section 4.6 of the Canadian Model will not be applied by agreement. If applied to a worker dispatched by the Union, it will be applied or deemed to be applied unilaterally by the Employer. The Union retains the right to grieve the legality of any imposition of random testing in accordance with the Grievance Procedure set out in this Collective Agreement.

  • Laboratory Testing All laboratories selected by UPS Freight for analyzing Controlled Substances Testing will be HHS certified.

  • ODUF Testing 6.6.1 Upon request from TWTC, AT&T shall send ODUF test files to TWTC. The Parties agree to review and discuss the ODUF file content and/or format. For testing of usage results, AT&T shall request that TWTC set up a production (live) file. The live test may consist of TWTC’s employees making test calls for the types of services TWTC requests on ODUF. These test calls are logged by TWTC, and the logs are provided to AT&T. These logs will be used to verify the files. Testing will be completed within thirty (30) days from the date on which the initial test file was sent.

  • Meter Testing Company shall provide at least twenty-four (24) hours' notice to Seller prior to any test it may perform on the revenue meters or metering equipment. Seller shall have the right to have a representative present during each such test. Seller may request, and Company shall perform, if requested, tests in addition to the every fifth-year test and Seller shall pay the cost of such tests. Company may, in its sole discretion, perform tests in addition to the fifth year test and Company shall pay the cost of such tests. If any of the revenue meters or metering equipment is found to be inaccurate at any time, as determined by testing in accordance with this Section 10.2 (Meter Testing), Company shall promptly cause such equipment to be made accurate, and the period of inaccuracy, as well as an estimate for correct meter readings, shall be determined in accordance with Section 10.3 (Corrections).

  • Substance Abuse Testing The Parties agree that it is in the best interest of all concerned to promote a safe working environment. The Union has no objection to pre-employment substance abuse testing when required by the Employer and further, the Union has no objection to voluntary substance abuse testing to qualify for employment on projects when required by a project owner. The cost and scheduling of such testing shall be paid for and arranged by the Employer. The Union agrees to reimburse the Employer for any failed pre-access Alcohol and Drug test costs.

  • Safety Inspection During inspection of County facilities conducted by the State Division of Occupational Safety and Health for the purpose of determining compliance with the California OSHA requirements, an OCEA designated employee shall be allowed to accompany the inspector while the inspector is in the employee's agency/department. The employee so designated shall suffer no loss of pay when this function is performed during the employee's regularly scheduled work hours.

  • Alcohol Testing Alcohol testing will be conducted by using an evidential breath-testing device (EBT) approved by the National Highway Traffic Safety Administration. A screening test will be conducted first. This initial screening may be accomplished using a saliva test kit. If the result is an alcohol concentration level of less than 0.02 percent, the test is considered a negative test. If the alcohol concentration level is 0.02 percent or more, a second confirmation test using the EBT will be conducted. The procedures that will be utilized by the lab for collection and testing of the specimen are attached hereto as Appendix A.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!