LNG Specifications Sample Clauses

LNG Specifications. 8.1.1 The User shall ensure that LNG unloaded at the LNG Receipt Point will comply with the LNG Specifications. 8.1.2 The User shall notify or cause the Transporter or master of its LNG Vessel, to notify the Operator as soon as possible after it becomes (or they become) aware that LNG unloaded or to be unloaded at the LNG Receipt Point does not comply with the LNG Specifications (“Off-Specification LNG”), providing details of the quantity and quality of such Off-Specification LNG. 8.1.3 If the Operator is aware that LNG unloaded or to be unloaded at the Terminal is Off- Specification LNG, then the Operator may, acting promptly: (a) accept such Off-Specification LNG (in whole or in part); or (b) reject such Off-Specification LNG (in whole or in part); and/or (c) cease unloading (if unloading has commenced). 8.1.4 The Operator shall, if requested by the User, without prejudice to Clause 3.4.1(h) but subject to Clause 8.1.5, cause the FSRU Owner to use reasonable endeavours to treat any Off-Specification LNG in order to make it conform to the LNG Specifications. The Operator shall provide to the User an estimate as to the anticipated cost of treating such Off-Specification LNG to the extent received by the Operator from the FSRU Owner. 8.1.5 The User shall indemnify, defend and hold the Operator harmless against all Costs and losses the Operator incurs in connection with any actions reasonably taken (or caused to be taken) by the Operator in relation to the User’s Off-Specification LNG and/or the User’s Off-Specification LNG being unloaded into the Terminal, including any costs incurred pursuant to Clause 8.1.4, all costs reasonably incurred by the Operator in mixing any such Off-Specification LNG or disposing of such Off-Specification LNG, the value of LNG lost or disposed of, any Costs associated with disposing of any Off- Specification LNG, any Costs incurred in relation to any cargo tank cool down and purchase of any LNG required to reinstate the Minimum Inventory or bring the LNG in the FSRU back within the LNG Specifications and the Gas regasified from the FSRU back within the Gas Specifications, damage to the Terminal (including repairing or replacing any damaged equipment), the Costs of cleaning or repairing the FSRU, any Costs incurred in relation to venting Off-Specification LNG, any delay or inability in unloading or reloading LNG vessels, and liability of the Operator (including liability to any third party) for damages or losses incurred to or in...
Sample 1Sample 2Sample 3See All (9)
AutoNDA by SimpleDocs
LNG Specifications. All LNG delivered by ELC under this Agreement shall comply with the then-current pressure specifications and quality standards set forth in the SLNG FERC Gas Tariff, as the same may be modified from time to time (the “LNG Specifications”). If the LNG Specifications are modified at any time during the Term of this Agreement, Customer shall give notice thereof to ELC.
Sample 1Sample 2
LNG Specifications. The LNG to be delivered by the Seller Group to the Buyer under this Agreement shall at the time of delivery at the Delivery Point, in the gaseous state, comply with the quality specifications set out in Schedule 4 (the "Specifications").
Sample 1
LNG Specifications. The LNG shall comply with the following LNG Specifications: [___] The LNG at the Delivery Point shall contain no material amount of water, mercury, foreign matters or other harmful matters that may interfere with the receipt or regasification of the LNG.
Sample 1

Related to LNG Specifications

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Packing Specifications 7.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Product Specifications (a) Supplier shall manufacture all Products according to the Specifications in effect as of the date of this Agreement, with such changes or additions to the Specifications of the Products related thereto as shall be requested by Buyer in accordance with this Section or as otherwise agreed in writing by the Parties. All other Products shall be manufactured with such Specifications as the Parties shall agree in writing. (b) Buyer may request changed or additional Specifications for any Product by delivering written notice thereof to Supplier not less than one hundred twenty (120) days in advance of the first Firm Order for such Product to be supplied with such changed or additional Specifications. Notwithstanding the foregoing, if additional advance time would reasonably be required in order to implement the manufacturing processes for production of a Product with any changed or additional Specifications, and to commence manufacture and delivery thereof, Supplier shall so notify Buyer, and Supplier shall not be required to commence delivery of such Product until the passage of such additional time. (c) Supplier shall be required to accommodate any change of, or additions to, the Specifications for any Product, if and only if (i) in Supplier’s good faith judgment, such changed or additional Specifications would not require Supplier to violate good manufacturing practice, (ii) the representation and warranty of Buyer deemed made pursuant to Subsection (e) below is true and correct, and (iii) Buyer agrees to reimburse Supplier for the incremental costs and expenses incurred by Supplier in accommodating the changed or additional Specifications, including the costs of acquiring any new machinery and tooling. For the avoidance of doubt, such costs and expenses shall be payable by Buyer separately from the cost of Products at such time or times as Supplier shall request. (d) Supplier shall notify Buyer in writing within thirty (30) days of its receipt of any request for changed or additional Specifications (i) whether Supplier will honor such changed or additional Specifications, (ii) if Supplier declines to honor such changed or additional Specifications, the basis therefor and (iii) if applicable, the estimated costs and expenses that Buyer will be required to reimburse Supplier in respect of the requested changes or additions, as provided in Subsection (c) above. Buyer shall notify Supplier in writing within fifteen (15) days after receiving notice of any required reimbursement whether Buyer agrees to assume such reimbursement obligation. (e) By its request for any changed or additional Specifications for any Product, Buyer shall be deemed to represent and warrant to Supplier that the manufacture and sale of the Product incorporating Buyer’s changed or additional Specifications, as a result of such incorporation, will not and could not reasonably be expected to (i) violate or conflict with any contract, agreement, arrangement or understanding to which Buyer and/or any of its Affiliates is a party, including this Agreement and any other contract, agreement, arrangement or understanding with Supplier and/or its Affiliates, (ii) infringe on any trademark, service xxxx, copyright, patent, trade secret or other intellectual property rights of any Person, or (iii) violate any Applicable Law. Buyer shall indemnify and hold Supplier and its Affiliates harmless (including with respect to reasonable attorneys’ fees and disbursements) from any breach of this representation and warranty.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

  • Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.

  • General specifications For the purpose of this Regulation, the vehicle shall fulfil the following requirements:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!