O&M obligations of the Licensee Sample Clauses

O&M obligations of the Licensee. 11.1.1. During the Operation Period, the Licensee shall operate and maintain the premises in accordance with this Agreement and if required, modify, repair or otherwise make improvements to the premises to comply with the provisions of this Agreement, Applicable Laws and Applicable Permits, and conform to Specifications and Standards and Good Industry Practice. The obligations of the Licensee hereunder shall include: (a) permitting safe, smooth and uninterrupted flow of visitors on the premises during normal operating conditions; (b) undertaking routine maintenance including prompt repairs; (c) undertaking routine maintenance of equipment if any; (d) preventing, with the assistance of concerned law enforcement agencies, any unauthorised use of the premises; (e) preventing, with the assistance of the concerned law enforcement agencies, any encroachments on the premises; (f) protection of the environment and provision of equipment and materials therefore; (g) operation and maintenance of all communication, control and administrative systems necessary for the efficient operation of the Licensed premises; (h) maintaining a public relations unit to interface with and attend to suggestions from the Users, government agencies, media and other agencies; and (i) complying with Safety Requirements in accordance with Article 18. 11.1.2. The usage of property business space shall be in accordance with the activities as listed in
Sample 1Sample 2Sample 3See All (10)
O&M obligations of the Licensee. 11.1.1. During the Operation Period, the Licensee shall operate and maintain the premises in accordance with this Agreement and if required, modify, repair or otherwise make improvements to the premises to comply with the provisions of this Agreement, Applicable Laws and Applicable Permits, and conform to Specifications and Standards and Good Industry Practice. The obligations of the Licensee hereunder shall include: (a) permitting safe, smooth and uninterrupted flow of visitors on the premises during normal operating conditions; (b) undertaking routine maintenance including prompt repairs; (c) undertaking routine maintenance of equipment if any; (d) preventing, with the assistance of concerned law enforcement agencies, any unauthorised use of the premises; (e) preventing, with the assistance of the concerned law enforcement agencies, any encroachments on the premises; (f) protection of the environment and provision of equipment and materials therefore; (g) operation and maintenance of all communication, control and administrative systems necessary for the efficient operation of the Licensed premises; (h) maintaining a public relations unit to interface with and attend to suggestions from the Users, government agencies, media and other agencies; and (i) complying with Safety Requirements in accordance with Article 18. 11.1.2. The usage of property business space shall be in accordance with the activities as listed in Annexure – 2 : List of Preferable Activities and Banned/Dis-allowed Activities 11.1.3. Licensee shall keep and maintain the Licensed Space in neat & clean, safe & sound condition by maintaining it properly at their own cost during the License Period. Licensee shall bear the cost of minor day-to-day repairs, annual refurbishing and routine special repairs required due to normal wear & tear with the efflux of time or due to planning/ constructional defects remained during augmentation of the Licensed Space. Any defective, weak or corroded structure should be replaced immediately with new proper structure after due certification from reputed agency. 11.1.4. Licensee shall ensure that all electrical wiring, power outlets and gadgets used are maintained properly, guarded against short circuits / fires. The instructions of Maha-Metro’s electrical inspectors/ authorized representative shall be complied by the licensee at its own cost. 11.1.5. Licensee shall ensure that fire detection and suppression measures installed inside their premises are kept i...
Sample 1Sample 2Sample 3See All (8)

Related to O&M obligations of the Licensee

  • Obligations of the Licensee 5.1.1. The Licensee’s Responsibilities and Duties shall include the following, in addition to and without prejudice to other obligations under this Agreement: a. to obtain due permits, necessary approvals, clearances and sanctions from Maha-Metro and all other competent authorities for all activities or infrastructure facilities including interior decoration, power, water supply, drainage & sewerage, telecommunication, etc.; b. to comply and observe at all times with all Applicable Permits, approvals and Applicable Laws in the performance of its obligations under this Agreement including those being performed by any of its contractors; c. to develop, operate and maintain the Licensed Area at all times in conformity with this Agreement; d. to furnish Maha-Metro with the “As built” Drawings of the Licensed Space(s) within the Moratorium Period; e. to ensure that no structural damage is caused to the existing buildings and other permanent structures at the station as a result of his activities or any of its agents, contractors etc.; f. to take all reasonable steps to protect the environment (both on and off the property business space) and to limit damage and nuisance to people and property resulting from construction and operations, within guidelines specified as per Applicable Laws and Applicable Permits; g. to duly supervise, monitor and control the activities of contractors, agents, etc., if any, under their respective License Agreements as may be necessary; h. to take all responsible precautions for the prevention of accidents on or about the property business space and provide all reasonable assistance and emergency medical aid to accident victims; i. not to permit any person, claiming through or under the Licensee, to create or place any encumbrance or security interest over whole or any part of the Licensed premises and/or other installed assets, or on any rights of the Licensee therein or under this Agreement, save and except as expressly permitted in this Agreement; j. to keep the Licensed Space free from all unnecessary obstruction during execution of works and store the equipment or surplus materials, dispose of such equipment or surplus materials in a manner that causes least inconvenience to the Xxxxx Xxxxxxx, metro commuters or Maha-Metro’s activities. k. at all times, to afford access to the Licensed Property Business Space to the authorised representatives of Maha-Metro, other persons duly authorised by any Governmental Agency having jurisdiction over the business of Licensed Property Business Space, to inspect the Licensed Property Business Space and to investigate any matter within their authority and upon reasonable notice; and l. use non-combustable material in the allotted space for creation/erection/installation of any kind of furniture, fixtures and or partitions within the space. Use of combustable material within the property business space shall not be permitted under any circumstances. m. to comply with the divestment requirements and hand over the Licensed Property Business Space to Maha-Metro upon Termination of the Agreement; 5.1.2. The Licensee shall be solely and primarily responsible to Maha-Metro for observance of all the provisions of this License Agreement on behalf of its employees and representatives and agents and any person acting under or for and on behalf of the Licensee, contractor (s) appointed for the Licensed Space as fully as if they were the acts or defaults of the Licensee, its agents or employees.

  • OBLIGATIONS OF THE LESSEE The Lessee shall keep the premises in a clean, sanitary, neat and presentable condition. The Lessee shall be responsible for the repairs, outside of ordinary wear and tear, of any part of the Premises that do not affect the structural parts of the building or structure in which it is located or those that are generally considered as minor repair (“Minor Repairs”) including but not limited to replacing light bulbs, cleaning or repairs of windows, doors, toilets and similar appurtenances. The Lessee shall, at its sole expense restore, repair and/or rectify any damage, outside of ordinary wear and tear, to the Premises caused by the Lessee or others that the lessee permits into the Premises that are not covered or compensable by any insurance.

  • Obligations of the Parties Clause 8

  • Maintenance obligations of the Contractor (i) The Contractor shall maintain the Project Highway for a period of 5 (five) years, corresponding to the Defects Liability Period, commencing from the date of the Completion Certificate (the “Maintenance Period”). For the performance of its Maintenance obligations, the Contractor shall be paid (if not included in the Schedule - H): (a) For flexible pavement with 5 years Maintenance Period including structures: no maintenance charges shall be paid for the first year; 0.50%of the Contract Price each for the second, third and fourth year; and 1% of the Contract Price for the fifth year (b) For rigid pavement with 10 years Maintenance Period including structures: 0.25% of the Contract Price each for the first, second and third year, 0.5% of the Contract Price each for fourth, fifth, sixth and seventh year, and 0.75% of the Contract Price each for eighth, ninth and tenth year. (c) For flexible perpetual pavement with 10 years maintenance period including structures: no maintenance charges shall be paid for the first year; 0.5% of the Contract Price each for the second, third and fourth year; 0.75% of the Contract Price each for the subsequent years till laying of the renewal layer or end of maintenance period, whichever is earlier. The requirement for the renewal layer shall be worked out based on the survey and investigation of the existing pavement and the cost of such renewal works shall be made separately to the Contractor based on the principles defined under clause 13.2(iii). After laying of the renewal layer, the Contractor shall be paid @ 0.5% of the original Contract Price each for the remaining years till the end of maintenance period. (d) For stand-alone Bridge/ Tunnel works: the contractor shall be paid @ 0.25% of the Contract Price each for the first five years and @ 0.50% of the Contract Price each for the remaining period of five years. (e) For any other works: The contractor shall be paid at the rate of 0.50% of the contract price for the entire duration of maintenance period.

  • Obligations of the Client 4.1. The client undertakes to inform the company in advance (meaning no later than 2 calendar days) about the dispatch of the goods, by entering the shipment into the Xxxxx.xxx software. 4.1.1. In case of non-compliance with subparagraph 3.2.1 of this agreement, the company has the right to refuse the client in accepting and placing his goods at the warehouse. 4.2. To send goods from the warehouse or to carry out other operations, the client is obliged to provide his client number (client ID) and data of the goods.

  • Obligations of Licensee 2.1 Licensee is responsible for the quality and safety of its products. 2.2 Licensee shall use all reasonable efforts and diligence to exploit the Invention and to proceed with the development, manufacture and sale of Licensed Product and to use commercially reasonable efforts to develop markets for the Licensed Product. 2.3 Licensee will represent the Licensed Product fairly in comparison with competitive products from other suppliers. 2.4 Licensee shall not, on behalf of University, make any representations or give any warranties or guarantees in respect of the Proprietary IPR not expressly authorised in writing by University, provided that such authorization shall not be unreasonably delayed or withheld by University. 2.5 Licensee shall not market the Licensed Product under the name of University, and not in any way create any impression that University is the seller of the Licensed Product. 2.6 Licensee shall take all such steps as are reasonably necessary to protect Intellectual Property Rights in the Invention. 2.7 Licensee shall promptly inform University upon becoming aware of any illegal or unauthorised use of the Invention or any infringement of the Prospective Patent or Proprietary IPR and Intellectual Property Rights therein. 2.8 Licensee shall comply with all laws, regulations and governmental obligations that may from time to time be applicable to the making, use or sale of the Licensed Product in each part of the Territory. 2.9 As between Licensee and University and without limiting any responsibility of an Affiliate or Sub-Licensee, Licensee shall be solely responsible for any claims arising or alleged to arise from loss or injury to persons or property caused or suffered in the course of or as a consequence of the use of the Invention by Licensee, Affiliates and Sub-Licensees or the supply and sale of the Licensed Product by Licensee, Affiliates and Sub-Licensees except where such loss or injury are caused by the gross negligence or wilful misconduct of University. 2.10 Except as expressly set forth under this Agreement, Licensee shall use its best endeavours to keep the Invention confidential and not to reveal to any third party any confidential information of University regarding the Invention until after a non-disclosure agreement has been signed, provided that no such obligation shall apply to any information that has been publicly disclosed through no breach of this Agreement by Licensee, including by publication of the Inventions by the applicable governmental agency, was in the possession of Licensee prior to disclosure by University, is obtained by Licensee from a third party, or is independently developed by Licensee. 2.11 To the extent prohibited by applicable law, Licensee shall not carry out any illegal, deceptive, or unethical practices, whether or not they are to the disparagement of the Invention, Licensed Product or University, or, subject to the foregoing in this Section 2.11, any other practices which may be detrimental to the Invention, Licensed Product, University or to the public interest.

  • Conditions to Obligations of the Parties The obligation of the Parties to effect the transfer of the DLC Nuclear Assets in respect of each Plant and the other transactions contemplated by this Agreement shall be subject to the fulfillment or waiver by each of Specified FE Subsidiaries and DLC at or prior to the DLC Nuclear Closing Date, of the following conditions in respect of each Plant: (a) The waiting period under the HSR Act applicable to the consummation of the transfer of the DLC Nuclear Assets contemplated hereby shall have expired or been terminated; (b) No preliminary or permanent injunction or other order or decree by any Governmental Authority which prevents the consummation of the transfer of the applicable DLC Nuclear Assets contemplated herein shall have been issued and remain in effect (each Party agreeing to use its reasonable best efforts to have any such injunction, order or decree lifted) and no statute, rule or regulation shall have been enacted by any state or federal government or Governmental Authority prohibiting the consummation of the transfer of the DLC Nuclear Assets; (c) In respect of the DLC Nuclear Closing in respect of Beaver Valley, DLC shall have terminated the Beaver Valley Facilities Leases and assumed the Beaver Valley Unit 2 Indentures Notes issued pursuant to the Beaver Valley Unit 2 Lease Indentures; (d) The Applicable NRC Approval(s) shall have been obtained in respect of the transfer of such Plant; (e) The CAPCO Settlement Agreement shall have been executed by DLC, the FE Subsidiaries and TEC; (f) The Support Agreement shall have been executed by FE and DLC; (g) All consents or approvals, filings with, or notices to any Governmental Authority that are necessary for the consummation of the transactions contemplated by each of the CAPCO Settlement Agreement and the Electric Facilities Agreement shall have been obtained or made, other than such consents, approvals, filings or notices which are not required in the ordinary course to be obtained or made prior to the consummation of the transactions thereunder or which, if not obtained or made, will not prevent the parties thereto from performing their material obligations thereunder; and (h) There shall be no court order requiring DQE to consummate the transactions contemplated under the Agreement and Plan of Merger between DQE and Allegheny Energy, Inc.

  • Obligations of the Contractor (i) Subject to and on the terms and conditions of this Agreement, the Contractor shall undertake the survey, investigation, design, engineering, procurement, construction, and maintenance of the Project Highway and observe, fulfil, comply with and perform all its obligations set out in this Agreement or arising hereunder. (ii) The Contractor shall comply with all Applicable Laws and Applicable Permits (including renewals as required) in the performance of its obligations under this Agreement. (iii) Subject to the provisions of Clauses 4.1 (i) and 4.1 (ii), the Contractor shall discharge its obligations in accordance with Good Industry Practice and as a reasonable and prudent person. (iv) The Contractor shall remedy any and all loss, defects, or damage to the Project Highway from the Appointed Date until the end of the Construction Period at the Contractor’s cost, save and except to the extent that any such loss, defect, or damage shall have arisen from any wilful default or neglect of the Authority. (v) The Contractor shall remedy any and all loss, defect or damage to the Project Highway during the Defects Liability Period at the Contractor’s cost to the extent that such loss, defect or damage shall have arisen out of the reasons specified in Clause 17.3. (vi) The Contractor shall remedy any and all loss or damage to the Project Highway during the Maintenance Period at the Contractor’s cost, including those stated in Clause 14.1 (ii), save and except to the extent that any such loss or damage shall have arisen on account of any wilful default or neglect of the Authority or on account of a Force Majeure Event. (vii) The Contractor shall, at its own cost and expense, in addition to and not in derogation of its obligations elsewhere set out in this Agreement: (a) make, or cause to be made, necessary applications to the relevant Government Instrumentalities with such particulars and details as may be required for obtaining Applicable Permits set forth in Schedule-F and obtain and keep in force and effect such Applicable Permits in conformity with the Applicable Laws; (b) procure, as required, the appropriate proprietary rights, licences, agreements and permissions for Materials, methods, processes and systems used or incorporated into the Project Highway; (c) make reasonable efforts to maintain harmony and good industrial relations among the personnel employed byit or its Sub-contractors in connection with the performance of its obligations under this Agreement; (d) ensure and procure that its Sub-contractors comply with all Applicable Permits and Applicable Laws in the performance by them of any of the Contractor’s obligations under this Agreement; (e) not do or omit to do any act, deed or thing which may in any manner violate any provisions of this Agreement; (f) support, cooperate with and facilitate the Authority in the implementation and operation of the Project in accordance with the provisions of this Agreement; (g) ensure that the Contractor and its Sub-contractors comply with the safety and welfare measures for labour in accordance with the Applicable Laws and Good Industry Practice; (h) keep, on Site, a copy of this Agreement, publications named in this Agreement, the Drawings, Documents relating to the Project, and Change of Scope orders and other communications given under this Agreement. The Authority’s Engineer and its authorised personnel shall have the right of access to all these documents at all reasonable times; (i) cooperate with other contractors employed by the Authority and personnel of any public authority; and (j) not interfere unnecessarily or improperly with the convenience of the public, or the access to and use and occupation of all roads and footpaths, irrespective of whether they are public or in the possession of the Authority or of others. (viii) The Contractor shall undertake all necessary superintendence to plan, arrange, direct, manage, inspect and test the Works. The Contractor shall provide all necessary superintendence of the Works for the proper fulfilling of the Contractor's obligations under the Agreement. Such superintendence shall be given by competent person having adequate knowledge of the operations to be carried out (including the methods and techniques required, the hazards likely to be encountered and methods of preventing accidents) for the satisfactory and safe execution of the Works. (ix) The Contractor shall obtain and maintain a project related bank account operational at site where all transactions related to the payment of work will be done. The Contractor shall submit a monthly account statement and a detailed report on utilization of funds transferred to this project related bank account to Authority’s Engineer. Notwithstanding anything contrary to this agreement, the authority, in the interest and to ensure timely completion of the work, reserves the right to audit such bank accounts to ensure that there is no diversion of funds from this project specific account to any other project being implemented by the Contractor. (x) The Contractor shall provide the documents of the Contractor specified in the Agreement, and all Contractors' personnel; Goods, consumables and other things and services, whether of a temporary or permanent nature, required in and for the execution, completion of Works and remedying defects. (xi) The Contractor shall perform the Works in conformity with the Project requirements and other requirements and standards prescribed under or pursuant to the Agreement. (xii) The Contractor shall carry out such work incidental and contingent to the original Scope of the Project to comply with Good Industry Practices. (xiii) The Contractor shall maintain required staff and necessary Contractor’s equipment and materials within the reach of the Site during the Defects Liability Period so that any defects arising are promptly attended.

  • Obligations of the Tenant The following clauses set out what is expected of the Tenant during the Tenancy in addition to the main terms of the Tenancy Agreement. If any of these terms are broken, the Landlord may be entitled to deduct monies from the Deposit, as set out in the Agreement, claim damages from the Tenant, or seek the court’s permission to have the Tenant evicted from the Property because of the breach.

  • Obligations of the Customer 3.1 The Customer agrees to: (a) The Customer shall give the Company not less than 14 days prior written notice of any proposed change of ownership of the Customer and or any change in the Customer’s details (including but not limited to, changes in the customer’s name, address, contact phone/fax numbers or business practice). The Customer shall be liable for any loss incurred by the Company as a result of the Customers failure to comply with this clause. (b) Pay the Company the Price for carrying out the Works in accordance with this agreement; (c) Provide the Company with all necessary plans, specifications, services and amenities, so as to allow the Company to carry out the Works, provide access to the Location and ensure to the Company’s reasonable satisfaction that the Location remains in a state and condition that is safe for the Company and its employees and agents; (d) Ensure the Location complies with all necessary bylaws and restrictions is structurally sound (in accordance with all legislation governing safety in the workplace); (e) Not to cause any disruption or obstruction to the carrying out of any Works and to follow any reasonable instructions provided by the Company about the Works; (f) Where the Works requires co-ordination with other trades then the Customer will supply the Company with a schedule detailing all relevant information so as to allow the Company sufficient time to co-ordinate with the Customer’s other tradespersons; (g) Permit the Company to attach such reasonable signage as the Company may wish to any Works so as to identify that the Company is carrying out the Works; (h) In circumstances where it wishes to make a claim against the Company pursuant to the guarantee given in clause 13.2, exclusively permit the Company or its authorised representative to remedy or make good any defects in its Workmanship and not permit any other third party to do so. 3.2 Without prejudice to any other right or remedy of the Company, if the Customer fails to carry out or perform any of its obligations pursuant to this clause 3 (excepting clause 3.1(g)) then, in addition to any Additional Expenses Charge that may apply, the Company may charge the Customer a Services Delay Charge for each day (or part thereof) that the Company is, in its reasonable opinion, unable and/or not required to carry out or perform the Works as a result of such breach by the Customer. 3.3 Where the Customer requests any Related Work to be carried out, the Company will use its best endeavours to source suppliers and/or contractors to carry out the Related Work, but the Customer is responsible for the commissioning, controlling, and payment for such work. 3.4 The Customer acknowledges that unless otherwise agreed in writing between the Customer and the Company, the Customer shall be responsible for obtaining, paying for and maintaining in force all permits, approvals, authorisations, authorities, licences and consents of all regulatory authorities whatsoever which are or may be necessary or advisable in connection with the Works.