Package Area Bids Sample Clauses

Package Area Bids. A. There shall be area bids for all full-time package delivery drivers in accordance with Section (3A) above. These bids shall be posted annually on the second Monday in February. All bids will have route numbers and start times. Delivery drivers in the order of their seniority shall be permitted the opportunity to bid the area of their choice within their center. Such area bid shall not be considered as a move for the purpose of a bid on a new vacancy as outlined in Section 6(A). Such bids will be posted in each center and will remain posted for three (3) weeks. The first (1st) week of posting will be for employ­ ee review. During the second (2nd) and third (3rd) weeks the em- ployees shall bid “in seniority order”. A total of ten percent (10%) of the employees will bid each day. All employees shall bid on their assigned day; otherwise their bid will be made from the areas avail- able at the time of their bid. All package delivery drivers shall be placed on their bid route with­ in sixty (60) calendar days following the completion of the bid. Package drivers who did not exercise a bid or drivers who are re­ moved from their bid training route will work as cover drivers. The primary job of these employees is to cover vacations or absenc­ es of a week or more in duration. These package cover drivers must select such work in seniority or­ der. This selection will be completed by Thursday for the following weeks to be covered. Example: Driver Xxxxx on vacation for one (1) or more weeks. Cover driver Xxxxx selects to cover Xxxxx’x vacation. Xxxxx must cover for duration of vacation(s). Once cover work is selected, the cover driver must complete the work schedule selected prior to making another selection. Cover drivers who are not covering an absence of a week or more in duration, in seniority order, will have the opportunity to select their workweek schedule on Thursday for the following week. The top fifteen percent (15%) (rounding up, with a minimum of one (1)) of unassigned cover drivers will have the opportunity to select dai­ ly open work in seniority order. Any cover driver who does not receive a start time and is not in the top fifteen percent (15%) as outlined in the paragraph above for the following week will be assigned any work in the classification or be subject to the appropriate layoff Article. All bids will be written and will be posted at one designated point in each building. Upon request, the Company will provide the Union with copies of the...
Sample 1See All (5)
AutoNDA by SimpleDocs

Related to Package Area Bids

  • Multiple Bedroom Spaces If this Housing Agreement expressly identifies more than one bedroom space in a multi-bedroom apartment as assigned to Resident on page 1, then: (a) references to a “space” or “spaces” will be deemed to refer to all of the spaces assigned to Resident, or to the entire apartment if all of the bedrooms in an apartment are assigned to Resident; and (b) if Resident is assigned fewer than all of the bedroom spaces in an apartment, use of common areas will continue to be shared with other residents of the apartment and any calculation of Resident’s share of any charges assessed pro rata to all residents of an apartment will be made by dividing the number of bedroom spaces assigned to Resident by the total number of occupied bedroom spaces within the apartment.

  • RESERVE PRICE AND BIDDING AT AUCTION CONDITIONS OF SALE 1.1 This sale is made by AmBank (M) Berhad [196901000166 (8515-D)][formerly known as AmFinance Berhad](“Assignee/Bank”) in exercise of the rights and powers conferred upon the Assignee/Bank pursuant to the Facility Agreement, Deed Of Assignment and Power Of Attorney all dated the 19th October, 2017 executed by Todi Ashish (Assignor/Borrower”) in favour of the Assignee/Bank subject to all conditions and category of land use, express or implied or imposed upon or relating to or affecting the property (“Property”) and shall further subject to the reserve price (“Reserve Price”) and the Conditions of Sale as appearing in the Proclamation of Sale. 1.2 Subject to the provisions of Clause 5 below the highest bidder for the Property described in the Proclamation of Sale if so allowed by the Auctioneer shall be the Purchaser (“Purchaser”) thereof and the Auctioneer shall have the right to reject any bid. If any dispute shall arise as to any bidding, the Property shall be at the option of the Auctioneer be put up again for sale at the last undisputed bid or the Auctioneer may decide on the dispute and the decision of the Auctioneer on all matters not provided for in this Conditions of Sale shall be final and binding in all respects if such decision is made during the course of conducting the auction on the auction date. 1.3 No bid shall be less than the previous bid and each bid shall be increased by a minimum amount to be determined by the Auctioneer at the time the Property is put up for sale and no bidding shall be withdrawn or retracted. Should there be any withdrawal or retraction from the registered bidder(s) or the highest bidder before or after the fall of the hammer, the bidding deposit (“Bidding Deposit”) shall be forfeited to the Assignee/Bank and the Property shall be at the option of the Auctioneer be put up for sale again or the Auctioneer may decide to adjourn the auction sale to another date. 1.4 In the event the subject matter offered for auction comprises more than one (1) property, the Auctioneer shall have the right to: - (a) determine or vary the order of sale; (b) offer the properties for sale either individually or en bloc or in any combination/manner as determined by the Auctioneer; and/or (c) withdraw any of the properties from the sale.

  • REPAIRED OR REPLACED PARTS / COMPONENTS Where the Contractor is required to repair, replace or substitute Product or parts or components of the Product under the Contract, the repaired, replaced or substituted Products shall be subject to all terms and conditions for new parts and components set forth in the Contract including Warranties, as set forth in the Additional Warranties Clause herein. Replaced or repaired Product or parts and components of such Product shall be new and shall, if available, be replaced by the original manufacturer’s component or part. Remanufactured parts or components meeting new Product standards may be permitted by the Commissioner or Authorized User. Before installation, all proposed substitutes for the original manufacturer’s installed parts or components must be approved by the Authorized User. The part or component shall be equal to or of better quality than the original part or component being replaced.

  • Programming Phase Schematic Design Phase: 2.2.1.3. Design Development Phase:

  • ESTIMATED / SPECIFIC QUANTITY CONTRACTS Estimated quantity contracts, also referred to as indefinite delivery / indefinite quantity contracts, are expressly agreed and understood to be made for only the quantities, if any, actually ordered during the Contract term. No guarantee of any quantity is implied or given. With respect to any specific quantity stated in the contract, the Commissioner reserves the right after award to order up to 20% more or less (rounded to the next highest whole number) than the specific quantities called for in the Contract. Notwithstanding the foregoing, the Commissioner may purchase greater or lesser percentages of Contract quantities should the Commissioner and Contractor so agree. Such agreement may include an equitable price adjustment.

  • Meeting Space and Facilities The Employer’s offices and facilities may be used by the Union to hold meetings, subject to the agency’s policy, availability of the space and with prior authorization of the Employer.

  • Bidding Phase 2.8.1 The Professional, following the Owner's approval of the Construction Document Phase, shall assist the Owner in obtaining bids and in award and preparation of Construction Contracts. 2.8.2 The Professional shall attend the bid opening and furnish a suitably detailed tabulation sheet for recording the name of each Bidder, the Bidder's Certificate of Responsibility Number, Bid Security, Base Bid, Alternates, and remarks. The Professional shall furnish sufficient tabulation sheets for all in attendance. Immediately after receipt of bids, the Professional shall submit to the Owner a certified tabulation of all bids received, along with his recommendation as to Contract award. 2.8.3 The Professional, following the award of a Construction Contract, shall prepare and submit to the Owner, two (2) copies of updated Construction Documents (Plans/Specifications). Each copy shall be marked OFFICIAL CONTRACT DOCUMENTS and shall include an executed bid Proposal Form, Agreement Form, Contract Bond, Power of Attorney, Certificate of Insurance, all bulletins, Addenda, and supplemental Drawings. One (1) copy shall be retained by the Owner, one (1) copy shall be for the Contractor. Any other contract document guidelines will be distributed to the Professional at the bid opening. 2.8.4 The Professional shall also furnish the area and volume of the building computed in accordance with criteria of the American Institute of Architects; and the square foot and cubic foot costs of only the building, the mechanical system, the electrical system, special built-in equipment, and the total Project cost. 2.8.5 The Professional shall, unless waived by the Owner, also submit one electronic format copy of the updated Contract Documents (plans and specifications) in coordination with said Contract Documents in 2.8.3 above. Said electronic submittal to be submitted within thirty (30) days after award by Owner in .pdf format. The actual cost of the electronic submittal shall be paid by the Owner, with cost approval by the Owner before printing is ordered in accordance with 3.4.

  • Bidder Supplied Samples The Commissioner reserves the right to request from the Bidder/Contractor a representative sample(s) of the Product offered at any time prior to or after award of a contract. Unless otherwise instructed, samples shall be furnished within the time specified in the request. Untimely submission of a sample may constitute grounds for rejection of Bid or cancellation of the Contract. Samples must be submitted free of charge and be accompanied by the Bidder’s name and address, any descriptive literature relating to the Product and a statement indicating how and where the sample is to be returned. Where applicable, samples must be properly labeled with the appropriate Bid or Contract reference. A sample may be held by the Commissioner during the entire term of the Contract and for a reasonable period thereafter for comparison with deliveries. At the conclusion of the holding period the sample, where feasible, will be returned as instructed by the Bidder, at the Bidder’s expense and risk. Where the Bidder has failed to fully instruct the Commissioner as to the return of the sample (i.e., mode and place of return, etc.) or refuses to bear the cost of its return, the sample shall become the sole property of the receiving entity at the conclusion of the holding period.

  • Cost of Bidding 6.1 The bidder shall bear all costs associated with the preparation and submission of his Bid, and the Employer will in no case be responsible and liable for those costs.

  • Production Phase contract period in which the Development and the Production are to be performed.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!