Apprentices and trainees a. Apprentices (programs of the USDOL). Apprentices will be permitted to work at less than the predetermined rate for the work they performed when they are employed pursuant to and individually registered in a bona fide apprenticeship program registered with the U.S. Department of Labor, Employment and Training Administration, Office of Apprenticeship Training, Employer and Labor Services, or with a State Apprenticeship Agency recognized by the Office, or if a person is employed in his or her first 90 days of probationary employment as an apprentice in such an apprenticeship program, who is not individually registered in the program, but who has been certified by the Office of Apprenticeship Training, Employer and Labor Services or a State Apprenticeship Agency (where appropriate) to be eligible for probationary employment as an apprentice. The allowable ratio of apprentices to journeymen on the job site in any craft classification shall not be greater than the ratio permitted to the contractor as to the entire work force under the registered program. Any worker listed on a payroll at an apprentice wage rate, who is not registered or otherwise employed as stated above, shall be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed. In addition, any apprentice performing work on the job site in excess of the ratio permitted under the registered program shall be paid not less than the applicable wage rate on the wage determination for the work actually performed. Where a contractor is performing construction on a project in a locality other than that in which its program is registered, the ratios and wage rates (expressed in percentages of the journeyman's hourly rate) specified in the contractor's or subcontractor's registered program shall be observed. Every apprentice must be paid at not less than the rate specified in the registered program for the apprentice's level of progress, expressed as a percentage of the journeymen hourly rate specified in the applicable wage determination. Apprentices shall be paid fringe benefits in accordance with the provisions of the apprenticeship program. If the apprenticeship program does not specify fringe benefits, apprentices must be paid the full amount of fringe benefits listed on the wage determination for the applicable classification. If the Administrator determines that a different practice prevails for the applicable apprentice classification, fringes shall be paid in accordance with that determination. In the event the Office of Apprenticeship Training, Employer and Labor Services, or a State Apprenticeship Agency recognized by the Office, withdraws approval of an apprenticeship program, the contractor will no longer be permitted to utilize apprentices at less than the applicable predetermined rate for the work performed until an acceptable program is approved.
b. Trainees (programs of the USDOL). Except as provided in 29 CFR 5.16, trainees will not be permitted to work at less than the predetermined rate for the work performed unless they are employed pursuant to and individually registered in a program which has received prior approval, evidenced by formal certification by the U.S. Department of Labor, Employment and Training Administration. The ratio of trainees to journeymen on the job site shall not be greater than permitted under the plan approved by the Employment and Training Administration. Every trainee must be paid at not less than the rate specified in the approved program for the trainee's level of progress, expressed as a percentage of the journeyman hourly rate specified in the applicable wage determination. Trainees shall be paid fringe benefits in accordance with the provisions of the trainee program. If the trainee program does not mention fringe benefits, trainees shall be paid the full amount of fringe benefits listed on the wage determination unless the Administrator of the Wage and Hour Division determines that there is an apprenticeship program associated with the corresponding journeyman wage rate on the wage determination which provides for less than full fringe benefits for apprentices. Any employee listed on the payroll at a trainee rate who is not registered and participating in a training plan approved by the Employment and Training Administration shall be paid not less than the applicable wage rate on the wage determination for the classification of work actually performed. In addition, any trainee performing work on the job site in excess of the ratio permitted under the registered program shall be paid not less than the applicable wage rate on the wage determination for the work actually performed. In the event the Employment and Training Administration withdraws approval of a training program, the contractor will no longer be permitted to utilize trainees at less than the applicable predetermined rate for the work performed until an acceptable program is approved.
APPRENTICES/TRAINEES 25.1 Apprentices/Trainees shall be entitled to all of the applicable rates and conditions of employment prescribed by this Agreement.
25.2 For clarification, in addition to the rates in APPENDIX 1, Trainees are entitled to receive full Daily Travel, XXXX, BEWT, CIPQ, Superannuation and any other entitlements in accordance with this document. Such entitlements shall not be paid at rates applicable to Apprentices.
25.3 Training arrangements for Apprentices/Trainees shall be as provided in the Building and Construction General On-site Award 2020.
25.4 Apprentices/Trainees shall be entitled to be paid the daily fares and travel allowance whilst attending training.
25.5 The Employer shall be responsible for meeting all costs associated with Apprenticeship/Traineeship training, including any student registration, tuition fee or other course costs.
25.6 During the first year of an Apprenticeship, tools to the minimum retail value of $600.00 shall be supplied by the Employer within a period of three months after the expiry of the probationary period or within a period of six months from the date of commencement of the employment, whichever first occurs.
25.7 During the second and subsequent years (or part of a year) of apprenticeship tools to the retail value of $600.00 shall be supplied by the Employer within a period of three months from the commencement date of each such year (or part of a year) of the indentured Apprenticeship.
25.8 Where an Apprentice has entered a Competency Based Training Agreement, the provision of tools will be on the following basis:
(a) During the term of Apprenticeship, an Employer shall, in respect of each level of the apprenticeship program, supply the Apprentice with tools of trade, to a minimum retail value of $600.00.
(b) The supply of tools of trade for each level of the program shall be linked to the successful achievement of competencies or, where appropriate, the demonstration of approved levels of progression towards the achievement of competencies as prescribed by the relevant National Training Package or in the relevant Award.
(c) Supply of tools will occur no later than three (3) months after the expiry of the probationary period or within a period of six (6) months from the date of commencement of the employment, whichever first occurs, and no later than three (3) months into subsequent levels of the apprenticeship.
(d) Apprentices employed under part-time or school based arrangements shall be entitled to a supply of tools consistent with the requirements as outlined in clause 25.6 and clause 25.7 above.
APPRENTICES 6.36.1 The Contractor acknowledges and agrees that, if this Contract involves a dollar amount greater than or a number of working days greater than that specified in Labor Code Section 1777.5, this Contract is governed by the provisions of Labor Code Section 1777.5. It shall be the responsibility of the Contractor to ensure compliance with this Article and with Labor Code Section 1777.5 for all apprenticeable occupations.
6.36.2 Pursuant to Labor Code Section 1777.5 if that Section applies to this Contract as indicated above, the Contractor and any subcontractors under him employing workers in any apprenticeable craft or trade in performing any work under this Contract shall apply to the applicable joint apprenticeship committee for a certificate approving the Contractor or subcontractor under the applicable apprenticeship standards and fixing the ratio of apprentices to journeymen employed in performing the work.
6.36.3 Pursuant to Labor Code Section 1777.5 if that Section applies to this Contract as indicated above, he Contractor and any subcontractor under him may be required to make contributions to the apprenticeship program.
6.36.4 The Contractor and all subcontractors under him shall comply with Labor Code Section 1777.6 which Section forbids certain discriminatory practices in the employment of apprentices.
Apprentice Wages (a) Apprentices’ rates of pay are set out in Appendix B which includes the description of the calculations.
First Aid Training In the interests of the occupational safety and health of employees, the Employer will undertake an in-service program of first aid training aimed at providing a first aid officer for each department.
Apprentice Employment and
WORKING HOURS AND OVERTIME 8.1 The normal working day shall be 8 consecutive hours exclusive of meal period. The normal work week shall be 40 hours.
8.1.1 The Company may, where required, institute 10-hour (exclusive of meal period)/4 day per week driver positions in accordance with Article 5.2.
8.2 Warehousepersons B shall be paid a minimum of 3 hours’ pay at the straight time rate, and if required to perform work beyond 3 hours shall be paid on the minute basis for work in excess of 3 hours. Such work will be offered in order of length of Company service.
8.3 The normal work week shall be Monday to Friday with rest days Sunday and Saturday; however, due to the operational requirements of the Company, a departure to rest days of Sunday and Monday or two consecutive days during the week may, to meet operational necessity, be instituted. Possible use of rest days other than Saturday, Sunday or Monday, where these may be required under this Agreement, to be explored by the parties.
8.4 All hours worked in excess of 8 hours in any one day, or 40 hours in any one week, shall be paid at one and one-half times the hourly rate of pay. This does not apply to positions as outlined in Article 8.1.1.
8.4.1 All hours worked in excess of 10 hours in any one day, or 40 hours in any one week, as specified in Article 8.1.1 shall be paid at one and one-half times the hourly rate of pay.
8.5 Employees, if required to work on regularly assigned rest days, shall be paid at the rate of time and one-half time on the actual minute basis with a minimum payment of 4 hours at the pro rata hourly rate.
8.6 Where work is required by the Company to be performed on a day which is not part of any assignment, it may be performed by an available extra or unassigned employee who will otherwise not have 40 hours of work that week. Overtime shall be allocated on the basis of seniority wherever possible, in a voluntary manner, within the work classification and shifts, provided the employee is capable of performing the duties; however, upon reaching the bottom of the seniority list in that classification and shift, the junior employee(s) will be required, in reverse order, to work the overtime.
8.7 Excluding Linehaul operations, employees shall not be required to take more than 60 minutes for a meal period and, if practical, 30-minute meal period will be utilized. Lunch hour for employees holding City Tractor or Driver Representative positions will commence between the end of the third hour of the shift and the end of the sixth hour of the shift. This clause only applies to employees holding bulletin positions.
8.8 All employees working in excess of three (3) hours will receive a fifteen (15) minute paid coffee break. A fifteen (15) minute coffee break without loss of pay will commence after approximately two hours of work, or at or about the mid-point of the first half after an employee reports for duty. A second fifteen (15) minute paid coffee break shall be after six hours of work where the tour of duty is in excess of six hours. There will be a third paid15 minute break if 3 hours of overtime are completed. This break is to be taken after the second hour of overtime has been completed. These breaks shall not be cumulative.
8.9 Employees shall be allowed to elect to bank overtime in lieu of pay to maximum of 40 hours at the rate of one and one-half hours banked for every one hour worked. Overtime worked will automatically be used to replenish the bank to the maximum of 40 hours during the course of the year. Any balance of banked overtime unused will be carried over to the next year unless the employee gives notice to withdraw from the program or requests to be paid out any unused portion as indicated in 8.9.1.
8.9.1 A request to bank overtime must be made in writing and received by the Company by March 7th of the year. Banked overtime will continue unless the Company is notified by the employee he wishes to opt out of the program. Upon written request to the Company by March 7th of each year an employee shall be entitled to be paid for all unused banked hours accumulated for the previous year. The Company will issue payment by March 31st. Banked overtime accumulation will be discontinued effective the first pay period in November until the last pay period in December inclusive each year. During this period employees will be able to withdraw banked overtime already accumulated, however all overtime worked in this period will be paid as part of the regular pay process. Banked overtime shall be secondary to annual vacations. The Company officer in charge or their designate must approve all requests, in writing, for leave to be drawn on banked time. An employee will make their request in writing 7 working days prior to the requested time off. Laid off employees will be allowed to withdraw banked time on days when no work is made available to them.
8.9.2 An employee off duty due to bona fide illness who is not claiming Short Term Disability Benefits payments will be permitted to use accumulated Banked Overtime as of the second day of their absence.
8.9.3 An employee off duty due to bone fide illness who is eligible to receive Short Term Disability benefit payments will be permitted to use accumulated Banked Overtime to offset the three- day waiting period required by the STD plan.
8.9.4 When a request to use Banked Overtime is granted, it will not be withdrawn after approval unless otherwise agreed by the employee and the supervisor.
8.9.5 Banked Overtime may be used in the event of a shortage of work occurs and the Company asks for volunteers to take a day off. Should the employee wish to use an annual vacation day or Banked Overtime Day to compensate for the days lost earnings, their request will not be denied.
Adult Apprentices 26.1 Adult apprentices are apprentices who commence their apprenticeship at the age of 21 years or older. Adult apprentices engaged under any of the classifications set out in Appendix 1 and will be paid a minimum rate equal to the rate of pay for a second-year apprentice, for the first two years of the apprenticeship, then on parity with other apprentices for the third and fourth years.
STUDENTS AND APPRENTICES Payments which a student or business apprentice who is or was immediately before visiting a Contracting State a resident of the other Contracting State and who is present in the first-mentioned State solely for the purpose of his education or training receives for the purpose of his maintenance, education or training shall not be taxed in that State, provided that such payments arise from sources outside that State.
Trainees Except as provided in 29 CFR 5.16, trainees will not be permitted to work at less than the predetermined rate for the work performed unless they are employed pursuant to and individually registered in a program which has received prior approval, evidenced by formal certification by the U.S. Department of Labor,
