Product Definitions Sample Clauses

Product Definitions. Products: Definition: -------------------------------------------------------------------------------- o POTS services Retail and Resale POTS includes all non-designed lines/circuits that originate at a customer's premise and terminate on an OE (switch Office Equipment). All others are considered specials. POTS includes Centrex, Basic ISDN and PBX trunks. -------------------------------------------------------------------------------- UNE POTS includes Basic 2-Wire Analog Loop, Customer specified signaling loops, Analog Line Port, and Interim Number Portability. Includes both new loops and "coordinated cutover" loop orders. "
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Product Definitions. Any defined term used in this section 4 (Product Specific Terms) but not defined herein will have the meaning ascribed to it in section 1 (General Terms and Conditions) or section 2.A (Terms for On-Premise Products).
Sample 1Sample 2Sample 3See All (5)
Product Definitions. 25 26 CLOTHING
Sample 1Sample 2Sample 3
Product Definitions. The products addressed in this Agreement shall be defined as follows:
Sample 1
Product Definitions. 8.1.1 Job Ad a. A “Job Ad” is a job advertisement in respect of a single job vacancy.
Sample 1
Product Definitions. For purposes hereof: "Circuit" means a XX-0, XX-x, XX-0, E-l, X-0, XX-0x, XX-00x, XX-00x 0+0, XX-00x, XX00x 1±0, OC-192c, XX-000x 0±0, XXXX or STM4. "Circuit Lease Term" means the term of a Circuit specified in the applicable Service Order. "Circuit Mileage" means the length of a Circuit specified in the applicable Service Order. "DS-0" means a circuit complying with TR-TSY-000333 "Switched and Special Access Services—Transmission Parameter Limits and Interface Combinations" Issue 1, July 1990. A "DS-]" is a signal conforming to the requirements set forth in Sections 9.3 and 10.2 of Bellcore TR-NWT-000499, Issue 5, December 1993. A "DS-3" is a signal conforming to the requirements set forth in Section 9.6 and 10.5 of Bellcore TR-NWT-000499, Issue 5, December 1993. "E-l" is a European digital transmission format devised by the "International Telecommunications Union—Telephone Standard ("ITU-TS") and given the name by the Conference of European Postal and Telecommunication Administration ("CEPT"). E-l carries signals at 2.048 Mbps (32 channels at 64Kbps). "E-3" is a European digital transmission format devised by the ITU-TS and given the name by the CEPT. E-3 carries 16 E-l signals with a data rate of 34.368 Mbps. "Full Circuit IPL Service" means a Circuit whereby both local and foreign-end international Circuits are provided by Supplier and/or its affiliates. "Half Circuit IPL Service" means a Circuit whereby Supplier provides domestic-end half-Circuit and Customer, or Customer's end user, coordinates and procures matching half-Circuits directly from the foreign-end carrier. "International Circuit" means an E-1, X-0, XXX0, XXX0, XX-x, XX-0, OC-3c, or an OC-12. A Circuit shall be considered an "International Circuit" if at any time it is operational outside the domestic United States of America, regardless of the origination and/or termination of the signal. All such International Circuits shall be considered a part of "International Service." An "OC-3c" is a signal based on the SONET frame structure as specified in Bellcore OR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI Tl.105, Digital Hierarchy-Optical Interface Rates and Formats Specifications. An "OC-12c" is a signal based on the SONET frame structure as specified in Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems: Common Criteria Physical Layer, and ANSI Tl.I05, Digital Hierarchy-Optical Interface Rates and Formats...
Sample 1
Product Definitions. 4 CLOTHING 5 “Clothing” means all human wearing apparel suitable for general use. The following list 8 1. 10 3. 11 4. 12 5. 13 6. 14 7. 15 8. 16 9. 17 10. 18 11. 19 12. 20 13. 21 14. 22 15. 23 16. 24 17. 25 18. 26 19. 27 20. 28 21. 29 22.
Sample 1
AutoNDA by SimpleDocs
Product Definitions. Products: Definition: POTS services Retail and Resale POTS includes all non-designed lines/circuits that originate at a customer’s premise and terminate on an OE (switch Office Equipment). All others are considered specials. POTS includes Centrex, Basic ISDN and PBX trunks. UNE POTS includes Basic 2-Wire Analog Loop, Customer specified signaling loops, Analog Line Port, and Interim Number Portability. Includes both new loops and “coordinated cutover” loop orders. “Coordinated cutover” loops are orders where a live customer is converted to a CLEC re-using the outside plant facilities. Coordination of all parties is necessary to minimize disruption of service to the end user. Special Services Special Services (“Specials”) are services or elements that require design intervention. These include such services/elements as: high capacity services (DS1 or DS3), Primary rate ISDN, digital services, private lines, multiplexing, and Interoffice Facilities. Interconnection Trunks Includes switched local interconnection (message) trunks carrying traffic between BA and CLEC offices. Includes End Office and Tandem trunks. Number of Installation Orders Total number of “N”, “T”, or “C” type orders. These orders include new orders, orders where the service is moving to a different location, or changes for existing service.
Sample 1
Product Definitions 
Sample 1Sample 2Sample 3

Related to Product Definitions

  • – SCOPE & DEFINITIONS 2.01 The Employer recognizes the Union as the bargaining agent of all Registered and Graduate Nurses employed by Revera Long Term Care Inc. operating as Columbia Forest Long Term Care Centre, Waterloo, Ontario, in a nursing capacity save and except the Assistant Director of Care and persons above the rank of Assistant Director of Care. (a) A full-time employee shall mean an employee covered by this Agreement who is committed to and regularly works the full work period of seventy- five (75) bi-weekly hours, exclusive of overtime. (b) A regular part-time employee is one who is committed to and regularly works less than the full prescribed bi-weekly hours of work. (c) A casual part-time employee means an employee who is called to work on a call in basis, but who does not work a regular schedule, or does so only for a specified period. Such employee has the option of refusing work when it is made available to her, however, it is also understood that a casual part-time employee cannot unreasonably or consistently refuse to work shifts. 2.03 Whenever the feminine pronoun is used in this agreement, it includes the masculine pronoun, where the context so requires and vice-versa. Where the singular is used, it may also be deemed to mean the plural and vice-versa.

  • 000 DEFINITIONS 6. 100 Maintenance shall be work performed for the repair, renovation, revamp and upkeep of property, machinery and equipment within the limits of the plant property.

  • GENERAL DEFINITION OF PRODUCTS Item 1: Cafeteria Furniture • Mobile tables on rollers with or without benches or stools. • Round and rectangular cafeteria tables without benches or stools. • Metal, wood, or wood clad metal wardrobes, beds and mattresses, night stands, chest of drawers, and single pedestal dormitory student desks with keyboard or center drawers.

  • Key Definitions As used herein, the following terms shall have the following respective meanings:

  • Specific Definitions The following terms used in this Agreement shall have the following meanings:

  • Background; Use of Funds; Definitions This Note constitutes the consideration payable to the Lender for the Series Gallery Drop 049 Asset (the “Series Asset”) pursuant to the Purchase and Sale Agreement relating to the Series Asset that was entered into between the Company and the Lender on or about the date hereof. As used in this Note, the following terms shall have the following meanings:

  • DPA Definitions The definition of terms used in this DPA is found in Exhibit “C”. In the event of a conflict, definitions used in this DPA shall prevail over terms used in any other writing, including, but not limited to the Service Agreement, Terms of Service, Privacy Policies etc.

  • SECTION I - DEFINITIONS As used in this Agreement, the following terms shall have the meanings ascribed herein unless otherwise stated or reasonably required by the Agreement, and other forms of any defined words shall have a meaning parallel thereto.

  • Other Definitions Term Defined in Section

  • 1Definitions As used in this Agreement, the following terms shall have the following definitions:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!