PRODUCT DELIVERY, STORAGE AND HANDLING. A. A. Storage; Concrete Materials:
1. Cement: Store in weather tight enclosures and protect against dampness, contamination and warehouse set.
PRODUCT DELIVERY, STORAGE AND HANDLING. A. Deliver, store, and handle products using means and methods that will prevent damage, deterioration, and loss, including theft and vandalism. Comply with manufacturer's written instructions.
PRODUCT DELIVERY, STORAGE AND HANDLING. A. Deliver, store, and handle products using means and methods that will prevent damage, deterioration, and loss, including theft and vandalism. Comply with manufacturer's written instructions.
B. Delivery and Handling:
1. Schedule delivery to minimize long-term storage at Project site and to prevent overcrowding of construction spaces.
2. Coordinate delivery with installation time to ensure minimum holding time for items that are flammable, hazardous, easily damaged, or sensitive to deterioration, theft, and other losses.
3. Deliver products to Project site in an undamaged condition in manufacturer's original sealed container or other packaging system, complete with labels and instructions for handling, storing, unpacking, protecting, and installing.
4. Inspect products on delivery to determine compliance with the Contract Documents and to determine that products are undamaged and properly protected.
PRODUCT DELIVERY, STORAGE AND HANDLING. A. Deliver materials to the job site in the manufacturer's original, unopened containers or wrappings with the manufacturer's name, brand name and installation instructions intact and legible. Deliver in sufficient quantity to permit work to continue without interruption.
B. Comply with the manufacturer's written instructions for proper material storage.
1. Store materials, except membrane, between 60 F and 80 F in dry areas protected from water and direct sunlight. If exposed to lower F temperature, restore to 60 minimum temperature before using.
2. Store materials containing solvents in dry, well ventilated spaces with proper fire and safety precautions. Keep lids on tight. Use before expiration of their shelf life.
C. Insulation must be on pallets, off the ground and tightly covered with waterproof materials.
D. Any materials which are found to be damaged shall be removed and replaced at the applicator's expense.
PRODUCT DELIVERY, STORAGE AND HANDLING. 1 Deliver to site each container sealed, and labelled with manufacturer's name, catalogue number or brand name, colour, formulation type, reducing instructions, and reference standard specification number if applicable. .2 Store only acceptable project materials at the site, and in an area specifically set aside for this purpose, that is locked, ventilated, maintained between a temperature range of 10° to 24°C, and protected from direct rays of sun.
PRODUCT DELIVERY, STORAGE AND HANDLING. 8.1. Site has limited spaces for storage, only delivery of materials agreed upon by the Construction Manager will be allowed. Comply with Construction Manager’s allocations.
8.2. Schedule delivery of products & removal of material with Construction Manager.
8.3. Make available areas for storage of products and construction equipment to meet specified requirements, and to ensure a minimum of interference with progress of the Work and relocations.
8.4. Trade Contractor to provide flag persons, traffic signals, barricades and flares/lights/lanterns as required to perform the Work and to protect the public.
PRODUCT DELIVERY, STORAGE AND HANDLING. A. Comply with manufacturer's written instructions for minimum and maximum temperature requirements and other conditions for storage.
B. Store cementitious materials off the ground, under cover, and in a dry location.
C. Store aggregates covered and in a dry location; maintain grading and other required characteristics and prevent contamination.
D. Promptly remove damaged or unsuitable products from the job site. Replace products with undamaged, suitable products.
PRODUCT DELIVERY, STORAGE AND HANDLING. A. Coordinate on-site storage of materials with other trades. Protect products from weather or other conditions, which would damage or impair their effectiveness. Store products on-site in such a manner that they may be readily inspected.
B. Exercise care in handling, loading, unloading and storing of PVC pipe and fittings. Transport all PVC pipe in a vehicle, which allows the length of pipe to lie flat so not to subject it to undue bending or concentrated external load at any point. Discard any section of pipe that has been dented or damaged and, if installed, replace with new piping.
PRODUCT DELIVERY, STORAGE AND HANDLING. A. Deliver equipment in manufacturer's containers, appropriately packaged and/or crated for protection during shipment and storage.
PRODUCT DELIVERY, STORAGE AND HANDLING. A. Deliver handle and store products in accordance with manufacturer's recommendations and by methods which prevent damage, deterioration and loss, including theft.
B. Control delivery schedule to minimize long term storage of products at site and overcrowding of construction spaces. Provide delivery/installation coordination to ensure minimum holding or storage times for products that are flammable, hazardous, easily damaged, or sensitive to deterioration, theft and other sources of loss.
