Technical Support and Maintenance Fees Sample Clauses

Technical Support and Maintenance Fees. The Annual Maintenance Fee for the first year is [***], and the renewal rate for subsequent years is [***]. As set forth in Appendix C-1 to the Product Schedule, the first year of annual maintenance begins ninety (90) days after delivery of the applicable Licensed Product(s) ("Maintenance Commencement Date") and ends one (1) year later. The Annual Maintenance Fee is due in full for the initial one (1) year term on or before the Maintenance Commencement Date. Thereafter, the Annual Maintenance Fee shall be due and payable in full on or before the beginning date of the consecutive one (1) year renewal term for which payment is due. --------------------- [***] THE CONFIDENTIAL PORTION OF THIS AGREEMENT HAS BEEN OMITTED AND FILED SEPARATELY WITH THE COMMISSION PURUSANT TO A REQUEST FOR CONFIDENTIALITY. DRAFT DATED JUNE 24, 2002 IV. RESTRICTED CREDITS MAY ACCRUE FOR NEW LICENSE AND CUSTOMIZATION SERVICE FEES APPLICABLE TO NEW/ADDITIONAL LICENSED PRODUCT(S) Artisan Components will accrue restricted credits ("Restricted Credits") for Customer based on royalty fees paid to Artisan Components when due hereunder as follows. [***] of a Restricted Credit will accrue for each [***] of royalty fees paid to Artisan Components when due hereunder. One Restricted Credit will be applied by Artisan Components only towards [***] of new License Fees and/or development fees for such products and/or services (other than the License and Customization Service Fees initially set forth in this Appendix B-1), and NOT royalty fees, for new/additional Licensed Product(s) ("New Orders") ordered by Customer under a subsequent Product Schedule (other than this Product Schedule) or ECO, if any; provided, however, that (i) the maximum amount of Restricted Credits to accrue for any process technology (including process derivatives) and be applied against New Orders may not exceed the total amount of Licensed Product(s) (Development Fees / License Fees/ Services Fees) orders placed by Customer for such process (including process derivatives)1 and (ii) the Restricted Credits may be applied only against New Orders set forth in a firm order from Customer within [***] of the date the Restricted Credits were accrued (date of accrual shall be the date Artisan Components receives the royalty fees that earned the Restricted Credits). The foregoing does not prohibit Customer from applying Restricted Credits earned from one process to purchases of products for another process. Restricted Credits have no...
AutoNDA by SimpleDocs
Technical Support and Maintenance Fees. Licensee agrees to pay Artisan Components US$ for the first year of maintenance and support for the Licensed Products. Such support and maintenance shall be provided by Artisan Components pursuant to the terms of the Technical Support and Maintenance Agreement attached hereto as Appendix C-1. The renewal rate for subsequent years shall be $ .
Technical Support and Maintenance Fees. Licenxxx agrees to purchase and pay technical support and maintenance for the TSMC 0.25 um process products within [***] of [***] of [***], but no later than [***], and the TSMC 0.18 um process products within [***] of [***] of [***], but no later than [***]. Licensee agrees to ---------- [***] Confidential treatment requested on behalf of Artisan pursuant to a request for confidential treatment filed with the Securities and Exchange Commission. Omitted portions have been filed separately with the Commission. purchase and pay for technical support and maintenance for the TSMC 0.13 um process products (or such replacement products as provided in Section 4 below) no later than [***]. The technical support and maintenance fees are [***] per [***], per [***]. Artisan will provide technical support and maintenance pursuant to the Technical Support and Maintenance Agreement attached to MLA as Appendix 3 to Product Schedule No. 1. Licensee acknowledges that it has the option of renewing annual technical support and maintenance fees for subsequent years.

Related to Technical Support and Maintenance Fees

  • Support and Maintenance RSA agrees to provide the maintenance and support specified in this Support Agreement and You agree to pay RSA's then-current annual support fee ("Support Fee").

  • TECHNICAL SUPPORT SERVICES 2.1 The technical support services (the "Services"): Party A agrees to provide to Party B the relevant services requested by Party B, which are specified in Exhibit 1 attached hereto ("Exhibit 1").

  • Maintenance and Support Services Distributor shall provide Maintenance and Support Services to all of its Customers of Licensed Software as set forth in Sections 3.4(a) and 3.4(b) below. Distributor may require Customers to provide the own First-Line Support: however, in no event shall Siebel be responsible for First-Line or Second-Line Support. Subject to Distributor's payment of the Maintenance Fees set forth in EXHIBIT A Siebel shall provide Third-Line Support to Distributor in accordance with Siebel's then current Maintenance and Support Services Policy. Distributor shall be responsible for all support related to the Value Added Offering.

  • Maintenance and Support Licensee is solely responsible for providing all maintenance and support to its customers of the Licensed Products. Licensor has, and shall have, no obligation to provide any maintenance or support to Licensee or any of Licensee’s customers with respect to any Technology and/or Licensed Products.

  • Technical Support State Street will provide technical support to assist the Fund in using the System and the Data Access Services. The total amount of technical support provided by State Street shall not exceed 10 resource days per year. State Street shall provide such additional technical support as is expressly set forth in the fee schedule in effect from time to time between the parties (the “Fee Schedule”). Technical support, including during installation and testing, is subject to the fees and other terms set forth in the Fee Schedule.

  • Maintenance Fees All maintenance and similar fees in respect of any Purchased Assets that are due and payable prior to the Closing have been paid in full.

  • Maintenance Support State Street shall use commercially reasonable efforts to correct system functions that do not work according to the System Product Description as set forth on Attachment A in priority order in the next scheduled delivery release or otherwise as soon as is practicable.

  • Software Maintenance The Vendor represents and warrants that the Software delivered to the escrow agent pursuant to subsection 11.7 for redelivery to the Owner pursuant to the Escrow Agreement will be in a form suitable for reproduction by the Owner and will include the full Source Code language statement of the Software as used by the Vendor sufficient to allow maintenance and modification.

  • Operation and Maintenance Throughout the period prior to any Termination of NAI’s Work, NAI must operate and maintain the Property in a good and workmanlike manner and in compliance with Applicable Laws in all material respects and pay or cause to be paid all fees or charges of any kind in connection therewith. (If NAI does not promptly correct any failure of the Property to comply with Applicable Laws that is the subject of a written complaint or demand for corrective action given by any Governmental Authority to NAI, or to BNPPLC and forwarded by it to NAI, then for purposes of the preceding sentence, NAI will be considered not to have maintained the Property “in compliance with all Applicable Laws in all material respects” whether or not the noncompliance would be material in the absence of the complaint or demand.) NAI must not use or occupy, or allow the use or occupancy of, the Property in any manner which violates any Applicable Law or which constitutes a public or private nuisance or which makes void, voidable or cancelable any insurance then in force with respect thereto. Without limiting the generality of the foregoing, NAI must not conduct or permit others to conduct Hazardous Substance Activities on the Property, except Permitted Hazardous Substance Use and Remedial Work; and NAI must not discharge or permit the discharge of anything (including Permitted Hazardous Substances) on or from the Property that would require any permit under applicable Environmental Laws, other than (1) storm water runoff, (2) fume hood emissions, (3) waste water discharges through a publicly owned treatment works, (4) discharges that are a necessary part of any Remedial Work, and (5) other similar discharges consistent with the definition of Permitted Hazardous Substance Use which do not significantly increase the risk of Environmental Losses to BNPPLC, in each case in strict compliance with Environmental Laws. To the extent that any of the following would, individually or in the aggregate, increase the likelihood of a 97-10/Meltdown Event or materially and adversely affect the value of the Property or the use of the Property for purposes permitted by this Agreement, NAI must not, without BNPPLC’s prior consent: (i) initiate or permit any zoning reclassification of the Property; (ii) seek any variance under existing zoning ordinances applicable to the Property; (iii) use or permit the use of the Property in a manner that would result in such use becoming a nonconforming use under applicable zoning ordinances or similar laws, rules or regulations; (iv) execute or file any subdivision plat affecting the Property; or (v) consent to the annexation of the Property to any municipality. NAI will not cause or permit any drilling or exploration for, or extraction, removal or production of, minerals from the surface or subsurface of the Property, and NAI must not do anything that could reasonably be expected to significantly reduce the market value of the Property. If NAI receives a notice or claim from any federal, state or other governmental authority that the Property is not in compliance with any Applicable Law, or that any action may be taken against BNPPLC because the Property does not comply with any Applicable Law, NAI must promptly furnish a copy of such notice or claim to BNPPLC.

  • USE AND MAINTENANCE Except as may be otherwise specified on any Schedule, (a) Lessee shall (1) use the Equipment solely in the continental United States and in the conduct of its business, for the purpose for which the Equipment was designed, in a careful and proper manner, and shall not permanently discontinue use of the Equipment; (2) operate, maintain, service and repair the Equipment, and maintain all records and other materials relating thereto, (A) in accordance and consistent with (i) all maintenance and operating manuals or service agreements, whenever furnished or entered into, including any subsequent amendments or replacements thereof, issued by the supplier or service provider, (ii) the requirements of all applicable insurance policies, (iii) manufacturer’s recommendations, (iv) the original purchase agreement under which such Equipment was acquired, so as to preserve all of Lessee’s and Lessor’s rights thereunder, including all rights to any warranties, indemnities or other rights or remedies, as and if applicable, (v) all applicable laws, and (vi) the prudent practice of other similar companies in the same business as Lessee, but in any event, to no lesser standard than that employed by Lessee for comparable equipment owned or leased by it; and (B) without limiting the foregoing, so as to cause the Equipment to be in good repair and operating condition and in at least the same condition as when delivered to Lessee hereunder, except for ordinary wear and tear resulting despite Lessee's full compliance with the terms hereof; (3) provide written notice to Lessor not less than thirty (30) days after any change of the location of any Equipment (or the location of the principal garage of any Equipment, to the extent that such Equipment is mobile equipment) as specified in the Schedule; and (4) not attach or incorporate the Equipment into any property except for other Equipment in such a manner that the Equipment may be deemed to have become an accession to or a part of such other property. (b) Within a reasonable time, Lessee will replace any parts of the Equipment which become worn out, lost, destroyed, damaged beyond repair or otherwise unfit for use, by new or reconditioned replacement parts which are free and clear of all Liens and have a value, utility and remaining useful life at least equal to the parts replaced (assuming that they were in the condition required by this Lease). Any modification or addition to the Equipment that is required by this Lease shall be made by Lessee. An interest in all such parts, modifications and additions to the Equipment immediately shall vest in Lessor, without any further action by Lessor or any other person, and they shall be deemed incorporated in the Equipment for all purposes of the related Schedule. Unless replaced in accordance with this Section, Lessee shall not remove any parts originally or from time to time attached to the Equipment, if such parts are essential to the operation of the Equipment, are required by any other provision of this Lease or cannot be detached from the Equipment without interfering with the operation of the Equipment or adversely affecting the value, utility and remaining useful life which the Equipment would have had without the addition of such parts. Except as permitted in this Section, Lessee shall not make any material alterations to the Equipment. (c) Lessee shall afford Lessor and/or its designated representatives immediate access to the premises where the Equipment is located for the purpose of inspecting and appraising such Equipment and all applicable maintenance or other records relating thereto at any time during normal business hours, at Lessee’s sole cost and expense. If any discrepancies are found as they pertain to the general condition of the Equipment, Lessor will communicate these discrepancies to Lessee in writing. Lessee shall then have thirty (30) days to rectify these discrepancies at its sole expense. Lessee shall pay all expenses of a re-inspection by Lessor’s appointed representative, including travel costs.

Time is Money Join Law Insider Premium to draft better contracts faster.