Trimming and Edging Sample Clauses

Trimming and Edging. A. Hand held mechanical trimming and edging shall be performed around all paved areas, including curbs, sidewalks, parking lots, driveways and streets to include asphalt, concrete, and etc. as well as around planter beds, trees, plants and buildings at the time of mowing. B. Along property lines, easements, and designated wetlands, maintain a six (6) to eight (8) feet swath between buildings, tree lines, wooded areas, vacant lots, and fences lines to maintain accessibility. C. Trimming around plants and trees shall be by appropriate chemical application. No more than three (3) inches from the base of growth. D. All fence lines shall be kept free of plant growth. Herbicides may be used in this instance with a maximum six (6) inch kill radius off posts. The Contractor shall not spray under horizontal split rail fencing, where there are no posts.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Trimming and Edging. Trimming: Grass shall be trimmed during, or as an immediate operation following, mowing. Trimming may be accomplished by hand or hand powered shears or rotary nylon “fish line” cutting machines. Grass will be trimmed at the same height as adjacent turf is mowed, and as needed to remove all grass leaves from around all obstacles and vertical surfaces in the turf such as posts, play equipment, water fountains, grills, benches, picnic tables, trees, walls, cement medians. Berms shall be trimmed with a small trim mower only. Contractor shall use special care when trimming around trees to avoid damage to bark surface and/or the living cambium layer beneath, and when trimming around sprinkler heads and other irrigation system fixtures to assure their proper water delivery function.
Sample 1Sample 2
Trimming and Edging. Trimming: Grass shall be trimmed during, or as an immediate operation following, mowing. Trimming may be accomplished by hand or hand powered shears or rotary nylon “fish line” cutting machines. Grass will be trimmed at the same height as adjacent turf is mowed, and as needed to remove all grass leaves from around all obstacles and vertical surfaces in the turf such as posts, play equipment, water fountains, grills, benches, picnic tables, trees, walls, cement medians. Berms shall be trimmed with a small trim mower only. Contractor shall use special care when trimming around trees to avoid damage to bark surface and/or the living cambium layer beneath, and when trimming around sprinkler heads and other irrigation system fixtures to assure their proper water delivery function. Trimming around fire hydrants is mandatory on all rights-of-way maintained by the Contractor. Area around fire hydrants shall be cleared sufficient to connect fire hoses.
Sample 1Sample 2
Trimming and Edging. Mowing equipment is subject to approval by the TxDOT Supervisor. Set mower height at a minimum of 3 inches or as directed. Do not use mowers and
Sample 1
Trimming and Edging. Trim around walls, buildings, curbs, header boards, valve boxes, quick couplers, and paved areas on a weekly basis to present a neat, clean appearance. Failure to adhere to this specification shall result in a
Sample 1
Trimming and Edging. (a) Trimming: Grass shall be trimmed during, or as an immediate operation following, mowing. Trimming may be accomplished by hand or hand powered shears or rotary nylon fish line) cutting machines. Grass will be trimmed at the same height as adjacent turf is mowed, and as needed to remove all grass leaves from around all obstacles and vertical surfaces in the turf such as posts, trees, walls, cement the Landscape Buffer. Berms shall be trimmed with a small trim mower only. The Association shall use special care when trimming around trees to limit damage to bark surface and/or the living cambium layer beneath, and when trimming around sprinkler heads and other irrigation system fixtures to assure their proper water delivery function. (b) Edging: Mechanical edging of all turf edges abutting sidewalks, and flush paved surfaces, including all road curbs, drives, etc., will be done during or as an immediate operation following the mowing for the cycle as follows: turf will be edged approximately 18 inches outside and around all trees that are in lawn areas, or as directed by City designee. Turf will be edged approximately 10 inches out from the drip line of shrubs and xxxxxx. Turf edging at shrub beds, flower beds, ground cover beds, xxxxxx, or around trees (where “edging” rather than “trimming” is directed) shall be edged with a manual or mechanical edger to a neat vertical uniform line. Dirt and debris produced by edging or trimming will be removed and swept from adjacent hard surfaces during or as an immediate operation following the mowing.
Sample 1
Trimming and Edging. 2.7.1. The Contractor shall, during each mowing, edge and trim around all items such as sidewalks, walkways, driveways, HVAC units, antennas, signage, electrical equipment, building, tree rings, fences, etc. 2.7.2. The Contractor shall also edge along all plant beds, parking lots and other edges as necessary to maintain a clean, distinct edge. Use of herbicides in lieu of or in addition to trimming is acceptable, subject to approval by the Facilities Management Manager. 2.7.2.1. The Contractor shall obtain all required licenses for the use of herbicides or pesticides. DocuSign Envelope ID: 09884B8F-4D47-4176-8ACF-6D6BA2416F27 2.7.2.2. After each application, signage must be posted in accordance with applicable laws or ordinances. 2.7.3. Permanent fixtures in lawn areas are too be trimmed to avoid unsightly growth at the base. Care is to be taken at all times when operating around fixtures to prevent damage to them. 2.7.4. All shrubbery shall be trimmed as needed and all clippings shall be picked up and properly disposed of to maintain a neat and acceptable appearance.
Sample 1
AutoNDA by SimpleDocs
Trimming and Edging i. Trimming and edging shall be performed around all paved areas, including curbs, sidewalks and streets, as well as around plant beds, trees, plants and buildings at the time of mowing. Trimming around plants and trees shall be by appropriate chemical application. ii. Maintain an 8 to 10 foot swath between buildings and tree lines and a 6 to 8 foot swath between fences and tree lines to maintain accessibility. Fence lines shall be chemically treated to eliminate unwanted vegetation. iii. The Contractor shall maintain all trees on site to a minimum clearance of 15 feet from grade. Sucker growth and dead material shall be removed from all trees and shrubs within 25 feet. Xxxxx xxxxxx shall be pruned each February. iv. All palm trees shall be pruned a minimum of once per year; seedpods shall be removed when they occur on the palms. v. Trimming Bamboo – remove older, unattractive culms and cut off any dead or unattractive branches. Make cuts just above a node, so as not to leave a stub that will die back and look unsightly. Bamboo should be cut down so that it is not hitting or obstructing any power lines. Trimming Bamboo Bordering for the following sites are required: • EWRF Administration Building 0000 X. Xxxxxxx Xxxxx Xxxxxxx, XX 00000. Trim Bamboo bordering perimeter of site. Bamboo shall be trimmed twice a year. • SWRF 0000 X. Xxxx Xxxx Xxxx Xxxxxxx, XX 00000. Trim Bamboo bordering perimeter of site. Bamboo shall be trimmed twice a year.
Sample 1
Trimming and Edging. During mowing operations, areas adjacent to buildings, trees, lights, guardrails, barrier posts, sidewalks, park signs and other facilities or amenities where powered grass mowers cannot access will be neatly trimmed by hand or using a weed eater to present a neat appearance. Ditches will also be trimmed during mowing operations. Grass along sidewalks will be edged once monthly during mowing to keep grass from encroaching onto the sidewalks and to convey a neat and orderly appearance. Care should be taken during trimming activities to prevent damage to shrubs, trees, other plants and posts. The contractor will be responsible for replacement of trees and shrubs damaged by negligence IAW FAR. 52.237-2, Protection of Government Buildings, Equipment and Vegetation.
Sample 1

Related to Trimming and Edging

  • Skidding and Yarding Methods of skid- ding or yarding specified for particular areas, if any, are indicated on Sale Area Map. Outside Clearcutting Units and construction clearings, insofar as ground conditions permit, products shall not be skidded against reserve trees or groups of reproduction and tractors shall be equipped with a winch to facilitate skidding. B6.421 Rigging. Insofar as practicable, needed rigging shall be slung on stumps or trees desig- nated for cutting.

  • Monitoring and Evaluation a. The AGENCY shall expeditiously provide to the COUNTY upon request, all data needed for the purpose of monitoring, evaluating and/or auditing the program(s). This data shall include, but not be limited to, clients served, services provided, outcomes achieved, information on materials and services delivered, and any other data required, in the sole discretion of the COUNTY, that may be required to adequately monitor and evaluate the services provided under this Contract. Monitoring shall be performed in accordance with COUNTY’S established Noncompliance Standards, a copy of which is attached hereto and incorporated by reference as Attachment “C”. b. The AGENCY agrees to permit persons duly authorized by the COUNTY to interview any clients and all current and/or former employees of the AGENCY to be assured of the AGENCY’S satisfactory performance of the terms of this Contract. c. Following such evaluation, monitoring, and/or audit, the COUNTY will deliver a report of its findings and recommendations with regard to the AGENCY’S conformance with this Contract’s terms and conditions to the AGENCY and/or Board of Directors’ President, and members, whenever applicable. If deficiencies are noted, a written notice of corrective action will be issued to the AGENCY which will specify deficiencies and provide a timeline for correction of those deficiencies. Within the designated timeframe in the written notice of corrective action, the AGENCY shall submit to the COUNTY’S CCC manager (“Manager”), or their designee, a corrective action plan to rectify all deficiencies identified by the COUNTY. d. Failure by the AGENCY to correct noted deficiencies, as outlined in the written notice of corrective action, may result in the AGENCY being deemed in breach of the Contract terms. e. The AGENCY shall cooperate with the COUNTY on all reviews to ensure compliance with all applicable COUNTY guidelines and requirements for general fund recipients.

  • Program Monitoring and Evaluation The Recipient shall prepare, or cause to be prepared, and furnish to the Association not later than six months after the Closing Date, a report of such scope and in such detail as the Association shall reasonably request, on the execution of the Program, the performance by the Recipient and the Association of their respective obligations under the Legal Agreements and the accomplishment of the purposes of the Financing.”

  • Gaming, betting and lotteries The Hirer shall ensure that nothing is done on or in relation to the premises in contravention of the law relating to gaming, betting and lotteries.

  • Monitoring and Review The Provider agrees to allow access to the Department for purposes of monitoring and review. This access includes but is not limited to client records, fiscal records, staffing records, policy and procedural manuals, facilities, staff, and children in care of the Department. The Department will conduct quality reviews, which may include site-based quality review visits.

  • Felling and Bucking Felling shall be done to minimize breakage of Included Timber and dam- age to residual timber. Unless agreed otherwise, felling shall be done by saws or shears. Bucking shall be done to permit removal of all minimum pieces set forth in A2. B6.411 Felling in Clearings. Insofar as ground conditions, tree lean, and shape of clearings per- mit, trees shall be felled so that their tops do not extend outside Clearcutting Units, construction clearings, and ar- eas of regeneration cutting. B6.000 Xxxxx Xxxxxxx. Stumps shall not exceed, on the side adjacent to the highest ground, the maximum heights set forth in A6, except that occasional stumps of greater heights are acceptable when Purchaser determines that they are necessary for safe and efficient conduct of logging. Unless otherwise agreed, Purchaser shall re-cut high stumps so they will not exceed heights specified in A6 and shall dispose of severed portions in the same manner as other logging debris. The xxxxx heights shown in A6 were selected with the objective of maximum reasonable utilization of the timber, unless Sale Area Map shows special areas where xxxxx heights are lower for aesthetic, land treatment, or silvicultural rea- sons.

  • Monitoring and Reporting The Programme Operator shall monitor, record and report on progress towards the programme’s outcomes in accordance with the provisions contained in the legal framework. The Programme Operator shall ensure that suitable and sufficient monitoring and reporting arrangements are made with the project promoters in order to enable the Programme Operator and the National Focal Point to meet its obligations to the Donors. When reporting on progress achieved in Annual and Final Programme Reports, the Programme Operator shall disaggregate results achieved as appropriate and in accordance with instructions received from the FMO.

  • Safeguards Monitoring and Reporting The Borrower shall do the following or cause the Project Executing Agency to do the following:

  • Training and Education SECTION 1 – Law Enforcement Supervisors’ Training

  • Reporting and Monitoring Please provide a brief description of the mechanisms proposed for this project for reporting to the UNDP and partners, including a reporting schedule.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!