Secondary Contact Name definition
Secondary Contact Name. Position:
Secondary Contact Name. Title: E-Mail Address: Mailing Address: City: State: Zip: County: Telephone (Day): Fax: (Evening): Contact (if different than Interconnection Customer) Name: E-Mail Address: Address: City: State: Zip: County: Telephone (Day): Fax: (Evening): Owner(s) of the Generating Facility: Facility Location (if different from above): Address: City: State: Zip: County: Utility: Account Number: Is the Generating Facility owned by the Interconnection Customer or Leased from an Electric Generator Lessor in NC? Owned Leased NCUC Docket No.: Inverter Manufacturer: Model: Nameplate Rating (each inverter): kW (AC) (each inverter) kVA (AC) (each inverter) Volts (AC) (each inverter) Single Phase: Three Phase: System Design Capacity1: kW (AC) (system total) kVA (AC) (system total) 1 Total inverter capacity. For photovoltaic sources only: Total panel capacity: kW (DC) (system total) Maximum Generating Capacity Requested:2 _(calculated)3_ kW (AC) For other sources: Maximum Generating Capacity Requested:2 kW (AC) Prime Mover Information (Refer to U.S. EIA Form 860 Instructions, Table 2 Prime Mover Codes and Descriptions at ▇▇▇▇▇://▇▇▇.▇▇▇.▇▇▇/survey/form/eia_860/instructions.pdf) 2 At the Point of Interconnection, this is the maximum possible export power that could flow back to the Utility. Unless special circumstances apply, load should not be subtracted from the System Design Capacity. 3 For a photovoltaic installation, the Utility will calculate this value as the lesser of (1) the total kW inverter capacity and (2) the total kW panel capacity (no DC to AC losses included, for simplicity). Prime Mover Code Prime Mover Description Energy Source Information (Refer to U.S. EIA Form 860 Instructions, Table 28 Energy Source Codes and Heat Content at ▇▇▇▇▇://▇▇▇.▇▇▇.▇▇▇/survey/form/eia_860/instructions.pdf) Fuel Type Energy Source Code Energy Source Description Is the equipment UL 1741 Listed? Yes No If Yes, attach manufacturer’s cut-sheet showing UL 1741 listing Estimated Installation Date: Estimated In-Service Date: The 20 kW Inverter Process is available only for inverter-based Generating Facilities no larger than 20 kW that meet the codes, standards, and certification requirements of Attachments 3 and 4 of the North Carolina Interconnection Procedures, or the Utility has reviewed the design or tested the proposed Generating Facility and is satisfied that it is safe to operate. List components of the Generating Facility equipment package that are currently certified: 1.
Secondary Contact Name. Title: Email:
Examples of Secondary Contact Name in a sentence
Company Information Company name: ____________________ Technology: ____________________ Contact Information Primary Contact Name: ____________________ Title: ____________________ Email: ____________________ Phone Number: ____________________ Secondary Contact Name: ____________________ Title: ____________________ Email: ____________________ Phone Number: ____________________ Please provide the transacting entity’s legal name and address, if available, and credit and contract contact information.
Correspondence and contact to the OAG shall be made through the primary and secondary contact persons listed below: Primary Contact Name: ▇▇▇▇▇ ▇▇▇▇▇▇▇ Title: Assistant Attorney General Phone Number: (▇▇▇) ▇▇▇-▇▇▇▇ Email: ▇▇▇▇▇.▇▇▇▇▇▇▇@▇▇▇.▇▇.▇▇▇ Secondary Contact Name: ▇▇▇▇ ▇▇▇▇▇▇ Title: Director of Legislative Affairs Phone Number: (▇▇▇) ▇▇▇-▇▇▇▇ Email: ▇▇▇▇.▇▇▇▇▇▇@▇▇▇.▇▇.▇▇▇ Agreed to the day of , 2019.
Meeting/Event Title Renter/Organization Contact Person Phone Number Email Address City State Zip Secondary Contact Name Phone Number Email Rental Date Number of people Setup Time: Start Time: End Time: Tear Down Time: 1/2 day = up to 4 hours Full day = 4-8 hours 1/2 Day Full Day 1/2 Day Full Day $ Maple River Room (200 sq.
Company: Primary Contact: Address: _ City: State: Zip Code: Business Phone: Email: Secondary Contact Name and Email: Exhibitor Registration includes one person with continental breakfast, lunch & reception.
Contract Administrator Name (First Last) ▇▇▇ ▇▇▇▇▇ Address Line 1 ▇ ▇▇▇▇▇▇ ▇▇▇▇., ▇▇▇▇▇ ▇▇▇ Address Line 2 City Albany State New York Zip Code 12205 Email Address ▇▇▇@▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇ Phone Number (If different from Toll-Free Number) ▇▇▇-▇▇▇-▇▇▇▇ Fax Number ▇▇▇-▇▇▇-▇▇▇▇ Secondary Contact Name (First Last) ▇▇▇▇▇ ▇.
More Definitions of Secondary Contact Name
Secondary Contact Name. Title: E-Mail Address: Mailing Address: City: State: Zip: County: Telephone (Day): Fax: Facility Location (if different from above): (Evening): Project Name: Address: City: State: Zip: County: Alternative Contact Information (if different from the Interconnection Customer) Contact Name: Title: E-Mail Address: Mailing Address: City: State: Zip: Telephone (Day) Fax: (Evening) Application is for: New Generating Facility Please provide additional information regarding the proposed change(s): Will the Generating Facility be used for any of the following? Net Metering? Yes No To Supply Power to the Interconnection Customer? Yes No To Supply Power to the Utility? Yes No To Supply Power to Others? Yes No (If yes, discuss with the Utility whether the interconnection is covered by the NC Interconnection Standard.) Is the Generating Facility owned by the Interconnection Customer or Leased from an Electric Generator Lessor in NC? Owned Leased NCUC Docket No.:
Secondary Contact Name. CountyTitle: E-Mail Address: Mailing Address: City: State: Zip: Telephone (Day): (Evening): Fax: Alternative Contact Information/Owner/Lessor (if different fromthan Interconnection Customer) Name: E-Mail Address: Address: City: State: Zip: Telephone (Day): Fax: (Evening): Owner(s) of the Generating Facility: Office of Regulatory Staff Certificate Number (if applicable): Generating Facility Information Facility Location (if different from above): Address: City: State: Zip: County: Utility: Account Number: Is the Generating Facility owned by the Interconnection Customer or Leased from an Electric Generator Lessor in SC? Leased Office of Regulatory Staff Leasing Certificate #: Inverter Manufacturer: Model Nameplate Rating: _ _(each inverter) (kW(AC)) (each inverter) _ (kVA) (AC Volts) (each inverter) System Design Capacity: _ Volts (kWAC) (kVAeach inverter) Single Phase _ : Three Phase _ : System Design Capacity: 2: kW (AC) (system total) For photovoltaic sources only: Total panel capacity: kW (DC) (system total) Maximum Generating Capacity Rquested:3 _(calculated)4 kW (AC) For other sources: Maximum Generating Capacity Requested:2 Prime Mover Information (Refer to U.S. EIA Form 860 Instructions, Table 2 Prime Mover Codes and Descriptions at ▇▇▇▇▇://▇▇▇.▇▇▇.▇▇▇/survey/form/eia860/instructions.pdf Prime Mover Description Prime Mover: Photovoltaic Reciprocating Engine Fuel Cell Turbine Other Energy Source: Solar Wind Hydro Diesel Natural Gas Information (Refer to U.S. EIA Form 860 Instructions, Table 28 Energy Source Codes and Heat Content at https:▇▇▇.▇▇▇.▇▇▇/▇▇▇▇▇▇/▇▇▇▇/▇▇▇▇▇▇/▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇ Energy Source Code Fuel Oil Other (describe) Is the equipment UL 1741 Listed? Yes No _ _ If Yes, attach manufacturer’s cut-sheet showing UL 1741 listing Estimated Installation Date: __ _Estimated In-Service Date: 3 At the Point of Interconnection, this is the maximum possible export power that could flow back to the Utility. Unless special circumstances apply, load should not be subtracted from the System Design Capacity. 4 For a photovoltaic installation, the Utility will calculate this value as the lesser of (1) the total kW inverter capacity and (2) the total kW panel capacity (no DC to AC losses included, for simplicity). The 20 kW Inverter Process is available only for inverter-based Generating Facilities no larger than 20 kW that meet the codes, standards, and certification requirements of Attachments 5 and 6 of the South Carolina Generator Interconnection Procedu...
Secondary Contact Name. Title: Address: Phone: Email: Province Contact: Title: Director, Clean Investment, Climate Action Secretariat, B.C. Ministry of Environment and Climate Change Strategy: Address: 3rd Floor, ▇▇▇ ▇▇▇▇▇▇▇▇ ▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇, ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇▇ Phone: ▇▇▇-▇▇▇-▇▇▇▇ Email: ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇@▇▇▇.▇▇.▇▇ Eligible Expense Start Date: <Insert date when the Recipient can start incurring Eligible Expenses. This is the date the Recipient is notified in writing it is a Successful Proponent. Note: The Province will not pay for any expenses incurred by a Proponent if an executed Funding Agreement is not reached between the Recipient and the Province > Project End Date: The Milestone Date for the Project Summary Report Milestone listed in Schedule D Project Facility: <Insert the name of the reporting operation and, if linear facility operation, the facility at which the project will occur, use names reported under GGIRCA.> BCGHGID # Insert the BCGHGID # of the reporting operations at which the Project takes place. The BCGHGID can be found on the emission report for the reporting operation. Project Partner(s) Insert legal name(s) of Project Partner(s) from Proposal. If none, use “N/A”. The following Schedules are attached to and incorporated into the Funding Agreement: A. Project Description B. Budget C. Expense Claims D. Milestones E. Key Metrics F. Insurance G. Project Summary Report Requirements H. In-Kind Contributions Proposal Reference Number: Insert reference number of Proposal. His Majesty the King in Right of British Columbia, as represented by the Minister of Environment and Climate Change Strategy, (the “Province”)
Secondary Contact Name. Email Address: Mailing Address: Phone Number(s):
Secondary Contact Name. Title: Email: Phone Number: Email to ▇▇▇▇▇▇▇▇▇▇▇@▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇
Secondary Contact Name. Relationship: ❑ Family ❑ Friend ❑ Caregiver ❑ Neighbor ❑ Legal Guardian ❑ Other or ❑ Organization, specify: Phone: Work: Home: Cell: E-‐mail:
Secondary Contact Name. Title: SC Generator Interconnection Request 2