ELECTRODES Sample Clauses

ELECTRODES. Iomed shall, within forty-five (45) days of the date of this Agreement, deliver to Fourxxxx **** electrodes identical to the electrodes used to perform the human fentanyl blood level study referenced in Section 4.05 hereof, together with the control analysis data and the batch manufacturing report with respect thereto. It is understood and agreed by the Parties that Fourxxxx xxxll pay to Iomed, and Iomed shall accept from Fourxxxx, xxr such electrodes a sum equal to ****, which sum represents ****, and that, except for such sum, Fourxxxx xxxll not be required to make any other payment whatsoever for or in connection with such electrodes, data or report.
Sample 1Sample 2
AutoNDA by SimpleDocs
ELECTRODES. Pt GAS DIFFUSION ELECTRODE as covered by US Xxx 6,103,077 . Commercial single sided ELAT V3 . Minimum Specific Performance Certification: 3.92 kW/m/2/ (@ 6 kA/m/2/, 1.5 bar a), 2.16 kW/m/2/ (@ 3 kA/m/2/, 1,5 bar), based on membrane area. . Performance Criteria: as per document QCPt-16 revision 1, dated October 12, 2000 as a modification of QC-60 revision 2, dated Sept. 16, 1999. Subsequent revisions to be approved in writing by DNE and BUYER . OPTIONS: 1) Coated with Nafion(R) ionomer, according to document SPR-NAF-01, dated May 19, 2000; 2) as a precut component; or 3) as a rolled good available for further processing Pt-Ru GAS DIFFUSION ELECTRODE as covered by US Xxx 6,103,077 . Commercial single sided ELAT V3 Anode . Minimum Specific Performance Certification (Pure Hydrogen): 3.92 kW/m/2/ (@ 6 kA/m/2/, 1,5 bar a), 2.16 Kw/m/2/ (@ 3 kA/m/2/, 1,5 bar a), based on membrane area . Performance criteria: as per document QCPtRu-16 revision 1, agreed September 20, 2000 as a modification of QC-60 revision 2, dated Sept 16, 1999. Subsequent revisions to be approved in writing by DNE and BUYER . OPTIONS: 1) Coated with Nafion(R) ionomer, according to document SPR-NAF-01, dated May 19, 2000; 2) as a precut component; or 3) as a rolled good available for further processing
Sample 1Sample 2
ELECTRODES. The Refinery as above specified shall be delivered with Electrodes sufficient for a one month use. All additional electrodes have to be purchased by Buyer and/or user of the Refinery. During the construction of the Refinery, Manufacturer shall assist Buyer in the selection of its preferred supplier of electrodes. Any manufacturing of the electrodes must receive the written approval by Manufacturer, not only in dimensions and tolerances, but also in material specifications. The use of electrodes not authorized by Manufacturer implies the automatic termination of all warranties because of expected malfunction as well as potential serious damage to the MagneGas Technology. SPARE PARTS: Spare parts for anticipated two years of use will be included such as filters, seals and other minor components.
Sample 1Sample 2
ELECTRODES. Mild Steel Electrodes shall comply with requirements of IS 814 – 1991 Specification for Covered Electrodes for Metal Welding of Mild Steel. High Tensile Steel Electrodes shall comply with the requirements of IS: 1442 – 1964 Specification for Covered Electrodes for the Metal Arc Welding of High Tensile Structural Steel.
Sample 1
ELECTRODES. The electrodes required for metal arc welding shall be covered electrodes and shall conform to IS 814.
Sample 1
ELECTRODES. Disposable defibrillator pads that incorporate a Proprietary Chip in the cable connector and is compatible with the Products. 1.8
Sample 1
ELECTRODES. Following the Closing Date, for a period of nine (9) months (the “Electrode Supply Period”), Seller shall deliver, or cause to be delivered, to the Xxxxx, and Purchaser or its respective Affiliates shall purchase from Seller for the Xxxxx, two thousand (2,000) metric tons of Electrodes (the “Total Quantity”) at a price of fifteen thousand dollars ($15,000) per metric ton, to be delivered to the Xxxxx in monthly quantities that are substantially consistent with past practice on the fifteenth (15th) day of each month during the Electrode Supply Period (such date in each month, an “Electrode Delivery Date”). Seller shall invoice Purchaser in arrears on a monthly basis for the Electrodes delivered on such Electrode Delivery Date. Purchasers shall pay such invoiced amounts within thirty (30) days of the date of each such invoice, which due date Seller shall specify on each such invoice. At any time within sixty (60) days of the date hereof, Purchasers may elect, in their sole discretion, to reduce the Total Quantity under this Section 5.21 by delivering a written notice to Seller (in which case the monthly quantities delivered pursuant to the preceding sentence shall be reduced proportionately to the reduction of the Total Quantity). In the event the Electrode Supplier experiences a force majeure pursuant to the Electrode Supply Contract during the Electrode Supply Period or otherwise does not deliver the full amount of Electrodes required to be delivered to Seller pursuant to the Electrode Supply Contract, Seller’s obligation to deliver Electrodes to the Xxxxx pursuant to this Section 5.21 shall be reduced to an amount equal to the total amount of Electrodes that were to be delivered to the Xxxxx pursuant to this Section 5.21 absent such force majeure event or failure to supply, multiplied by the quotient of (a) the total amount of Electrodes that were actually delivered to Sellers under the Electrode Supply Contract, divided by (b) the total amount of electrodes that were to be delivered to Sellers under the Electrode Supply Contract absent such force majeure event or failure to supply.
Sample 1
AutoNDA by SimpleDocs
ELECTRODES. The Gasifier as above specified shall be delivered with Electrodes sufficient for initial testing and operation. All additional electrodes have to be purchased from MagneGas. The use of electrodes not authorized by Manufacturer implies the automatic termination of all warranties because of expected malfunction as well as potential serious safety issues and possible damage to the MagneGas Technology. APPROVED LIQUID WASTE The Gasifier should be solely used with liquid waste approved by the company in writing. Any use of liquid waste not approved by the company will imply the termination of the warranty and may cause damage to the Gasifier as well as injury to the operators.
Sample 1
ELECTRODES. Seller hereby agrees to sell and deliver to Buyer, and Buyer hereby agrees to purchase and accept from Seller, during the term of this Agreement, [***]% of Buyer's annual requirements of electrodes and connecting pins. The electrode and connecting pin specifications are described in Exhibit A.
Sample 1

Related to ELECTRODES

  • Animals The Hirer shall ensure that no animals (including birds) except guide dogs are brought into the premises, other than for a special event agreed to by the Village Hall. No animals whatsoever are to enter the kitchen at any time.

  • Raw Materials Lonza shall procure all required Raw Materials as well as consumables other than those Raw Materials that are Customer Materials. Customer shall be responsible for payment for all consumables and Raw Materials ordered or irrevocably committed to be procured by Lonza hereunder. Upon cancellation of any Batch or termination of the Agreement, all unused Raw Materials shall be paid for by Customer within [***] days of invoice and at Customer’s option will either be (a) held by Lonza for future use for the production of Product, (b) delivered to Customer, or (c) disposed of by Lonza.

  • Plant The expression ‘Plant’ as used in the tender papers shall mean every temporary accessory necessary or considered necessary by the Engineer to execute, construct, complete and maintain the work and all altered, modified, substituted and additional works ordered in the time and the manner herein provided and all temporary materials and special and other articles and appliance of every sort kind and description whatsoever intended or used therefore.

  • Samples Physical examples of materials, equipment, or workmanship that are representative of some portion of the Work and that establish the standards by which such portion of the Work will be judged. The Contractor shall furnish for approval all samples required by the Contract Documents. The Work shall be in accordance with approved samples.

  • Wash all machine-washable bedding, drapes, and clothing, on the hottest water temperature and dry on the highest heat setting. Items that cannot be washed must be taken to a dry cleaner who MUST be informed of the issue. You must safely discard ALL items that cannot be decontaminated.

  • Noise The Hirer shall ensure that the minimum of noise is made on arrival and departure, particularly late at night and early in the morning. The Hirer shall, if using sound amplification equipment, make use of any noise limitation device provided at the premises and comply with any other licensing condition for the premises.

  • Compatibility 1. Any unresolved issue arising from a mutual agreement procedure case otherwise within the scope of the arbitration process provided for in this Article and Articles 25A to 25G shall not be submitted to arbitration if the issue falls within the scope of a case with respect to which an arbitration panel or similar body has previously been set up in accordance with a bilateral or multilateral convention that provides for mandatory binding arbitration of unresolved issues arising from a mutual agreement procedure case.

  • Components Patheon will purchase and test all Components (with the exception of Client-Supplied Components) at Patheon’s expense and as required by the Specifications.

  • Formation; Composition Within […***…] days after the Effective Date, the Parties shall establish a committee to oversee Development of Licensed Product(s) in the Territory in accordance with the Development Plan(s) for the same and to coordinate the Development activities of the Parties, and review and discuss the Development and Manufacture of Licensed Compound and Licensed Products (the “JDC”). Each Party shall initially appoint three (3) representatives to the JDC, with each representative having knowledge and expertise in the development of compounds and products similar to the Licensed Products and having sufficient seniority within the applicable Party to make decisions arising within the scope of the JDC’s responsibilities. The JDC may change its size from time to time if agreed by consensus among its members, provided that the JDC shall consist at all times of an equal number of representatives of each of Galapagos and Gilead. Each Party may replace its JDC representatives at any time upon written notice to the other Party. The JDC may invite non-members to participate in the discussions and meetings of the JDC, provided that such participants shall have no voting authority at the JDC. The JDC shall have a chairperson, who shall serve for a term of one (1) year, and who shall be selected alternately, on an annual basis, by Galapagos or Gilead. The initial chairperson shall be selected by […***…]. The role of the chairperson shall be to convene and preside at meetings of the JDC and to ensure the preparation of minutes, but the chairperson shall have no additional powers or rights beyond those held by the other JDC representatives.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.

Time is Money Join Law Insider Premium to draft better contracts faster.