Employee Providing Tools Sample Clauses

Employee Providing Tools. AT A GLANCE 8.9.5.1 Where the employee and Council agree that the employee shall supply their own tools, a tool allowance shall be paid at the rate set out in the Allowances Table of this Agreement. A listing of tools expected to be supplied by the employee receiving the allowance is available from the relevant coordinator. The listings may be reviewed and updated from time to time in consultation with staff. 8.9.5.2 Complete Tool Kits - allowances paid to employees in accordance with this sub-clause shall be deemed to apply in respect of a full range of tools ordinarily used in carrying out the trade, occupation, duties and functions.
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
Employee Providing Tools a) Where the employee and the council agree that the employee shall supply their own tools, a tool allowance shall be paid as follows: - Per Week $ • Bricklayer Table 2 of Part B • Xxxxxxxxx and Plumber Table 2 of Part B • Metals and Mechanical Trades Table 2 of Part B • Painter and Signwriter Table 2 of Part B • Plasterer Table 2 of Part B b) Complete Tool Kits - allowances paid to employees in accordance with this clause shall be deemed to apply in respect of a full range of tools ordinarily used in carrying out the trade, occupation, duties and functions. c) Special Purpose Tools - allowances prescribed by this clause shall not cover tools required for special uses or purposes outside of the ordinary trade functions of the employee's classification.
Sample 1
Employee Providing Tools. (a) Where the employee and the Service agree that the employee shall supply their own tools, a tool allowance shall be paid as follows:- PER WEEK Bricklayer Table 2 of Part B Xxxxxxxxx and Plumber Table 2 of Part B Metals and Mechanical Trades Table 2 of Part B Painter and Signwriter Table 2 of Part B Plasterer Table 2 of Part B (b) Complete Tool Kits – allowances paid to employees in accordance with this clause shall be deemed to apply in respect of a full range of tools ordinarily used in carrying out their trade, occupation, duties and functions.
Sample 1
Employee Providing Tools. Where the employee and the council agree that the employee shall supply their own tools, a tool allowance shall be paid as follows:- PER WEEK $ Electrical Trades Table 2 of Part B
Sample 1
Employee Providing Tools. (a) Where the employee and council agree that the employee shall supply their own tools, a tool allowance shall be paid as follows: - Per Week $ Bricklayer Table 2 of Schedule A Xxxxxxxxx and Plumber Table 2 of Schedule A Metals and Mechanical Trades Table 2 of Schedule A Painter and Signwriter Table 2 of Schedule A Plasterer Table 2 of Schedule A (b) Complete Tool Kits - allowances paid to employees in accordance with this clause shall be deemed to apply in respect of a full range of tools ordinarily used in carrying out the trade, occupation, duties and functions. (c) Special Purpose Tools - allowances prescribed by this clause shall not cover tools required for special uses or purposes outside of the ordinary trade functions of the employee's classification. (d) Compensation of Tools - Council shall reimburse the employee to a maximum per annum as set out in Table 2 of Schedule A for loss of tools by breaking and entering whilst securely stored at the council's premises or on the job site or if the tools are lost or stolen while being transported by the employee at the council's direction, or if the tools are stolen during an employee's absence after leaving the job because of injury or illness. Provided that an employee transporting their own tools shall take all reasonable care to protect those tools and prevent theft or loss. (e) Provided for the purposes of this clause: - (1) Only tools used by the employee in the course of their employment shall be covered by this clause; (2) The employee shall, if requested to do so, furnish council with a list of tools so used; (3) Reimbursement shall be at the current replacement value of new tools of the same or comparable quality; (4) The employee shall report any theft to the police prior to making a claim on council for replacement of stolen tools.
Sample 1
Employee Providing Tools. 7.6.6.1 Where the employee and the council agree that the employee shall supply their own tools, a tool allowance shall be paid at the rate set out in the Allowances Table of this Agreement. 7.6.6.2 Complete Tool Kits - allowances paid to employees in accordance with this clause shall be deemed to apply in respect of a full range of tools ordinarily used in carrying out the trade, occupation, duties and functions.
Sample 1
Employee Providing Tools a) Where the employee and Council agree that the employee shall supply their own tools, a tool allowance shall be paid as follows: Bricklayer Table 2 Xxxxxxxxx and Plumber Table 2 Metals and Mechanical Trades Table 2 Painter and Signwriter Table 2 Plasterer Table 2 b) Complete Tool Kits – allowances paid to employees in accordance with this clause shall be deemed to apply in respect of a full range of tools ordinarily used in carrying out the trade, occupation, duties and functions.
Sample 1
AutoNDA by SimpleDocs

Related to Employee Providing Tools

  • Service Providing Methodology 1.3.1 Party A and Party B agree that during the term of this Agreement, where necessary, Party B may enter into further service agreements with Party A or any other party designated by Party A, which shall provide the specific contents, manner, personnel, and fees for the specific services. 1.3.2 To fulfill this Agreement, Party A and Party B agree that during the term of this Agreement, where necessary, Party B may enter into equipment or property leases with Party A or any other party designated by Party A which shall permit Party B to use Party A’s relevant equipment or property based on the needs of the business of Party B. 1.3.3 Party B hereby grants to Party A an irrevocable and exclusive option to purchase from Party B, at Party A’s sole discretion, any or all of the assets and business of Party B, to the extent permitted under PRC law, at the lowest purchase price permitted by PRC law. The Parties shall then enter into a separate assets or business transfer agreement, specifying the terms and conditions of the transfer of the assets.

  • Compensation for Providing Information The Party requesting Information agrees to reimburse the other Party for the reasonable out-of-pocket costs, if any, of creating, gathering and copying such Information, to the extent that such costs are incurred for the benefit of the requesting Party.

  • Service Provision Subject to, and in accordance with, the terms and conditions in this Agreement, the Operator will provide the Services (either directly or by making its facilities and services available to other Physicians) to: (a) those Clients of Physicians who arrange for use of the Facility for the purposes of providing surgical services to such Clients, or (b) in cases only where referral by a Physician is not required, those Clients who present themselves directly to the Operator and who request the Services, provided that in each instance, the provision of the Services requested is both clinically and ethically appropriate, constitutes the provision of a service which is Insured to a person eligible to receive those Services and is provided during the Term.

  • Third Party Software 1. The Software may contain third party software that requires and/or additional terms and conditions. Such required third party software notices and/or additional terms and conditions are located at xxxx://xxx.xxxxxxxxx.xxx/thirdparty/index.html and are made a part of and incorporated by reference into this XXXX. By accepting this XXXX, You are also accepting the additional terms and conditions, if any, set forth therein.

  • Proprietary Software Depending upon the products and services You elect to access through Electronic Access, You may be provided software owned by BNY Mellon or licensed to BNY Mellon by a BNY Mellon Supplier (“Proprietary Software”). You are granted a limited, non-exclusive, non-transferable license to install the Proprietary Software on Your authorized computer system (including mobile devices registered with BNY Mellon) and to use the Proprietary Software solely for Your own internal purposes in connection with Electronic Access and solely for the purposes for which it is provided to You. You and Your Users may make copies of the Proprietary Software for backup purposes only, provided all copyright and other proprietary information included in the original copy of the Proprietary Software are reproduced in or on such backup copies. You shall not reverse engineer, disassemble, decompile or attempt to determine the source code for, any Proprietary Software. Any attempt to circumvent or penetrate security of Electronic Access is strictly prohibited.

  • The Web Services E-Verify Employer Agent agrees to, consistent with applicable laws, regulations, and policies, commit sufficient personnel and resources to meet the requirements of this MOU.

  • Service Provided 2.1 AT&T OKLAHOMA will use the practices and procedures and the rules and regulations applicable to its provision of White Pages directories on a nondiscriminatory basis. AT&T OKLAHOMA will include in appropriate White Pages directories the primary alphabetical listings of all CLEC customers (other than non-published or non-list Customers) located within the local directory area. When CLEC provides its subscriber listing information to AT&T OKLAHOMA’s listings database, CLEC will receive for its End User, one primary listing in AT&T OKLAHOMA’s White Pages directory and a listing in AT&T OKLAHOMA’s directory assistance database. 2.2 CLEC will furnish to AT&T OKLAHOMA subscriber listing information pertaining to CLEC customers located within the AT&T OKLAHOMA local directory area, along with such additional information as AT&T OKLAHOMA may require to prepare and print the alphabetical listings of said directory. AT&T OKLAHOMA will accept listing information from CLEC according to the manual and mechanized listing methods, procedures and ordering instructions provided via the CLEC Online website. CLEC agrees to submit listing information via the mechanized process within six (6) months of the effective date of this Attachment, or upon CLEC reaching a volume of two hundred (200) listing updates per day, whichever comes first. Notwithstanding the foregoing, CLEC may continue to manually submit directory listing information for complex caption sets with two (2) or greater degrees of indent. CLEC will submit listing information within three (3) Business Days of installation, disconnection or other change in service (including change of non-listed or non-published status) affecting the Directory Assistance database or the directory listing of a CLEC retail end users. AT&T OKLAHOMA shall process CLEC orders for updates to subscriber listing information within three (3) Business Days of receipt. CLEC must submit all listing information intended for publication by the directory close date. Both parties will use commercially reasonable efforts to ensure the accuracy of the submission and processing of the listing updates. 2.3 AT&T OKLAHOMA will include the listing information for CLEC’s customers for Resale services in AT&T OKLAHOMA’s White Pages directory database in the same manner as it includes listing information for AT&T OKLAHOMA’s end user customers. 2.4 AT&T OKLAHOMA will provide, via the AT&T CLEC Online web site, the directory listing criteria, methods, procedures and ordering information to CLEC for White Pages listings and will provide changes to such criteria not later than thirty (30) days in advance of such changes becoming effective. This information will include, but not be limited to: 2.4.1 Business rules for standard White Pages listings (e.g., space restrictions, non-listed and non- published listings, abbreviated listings, secondary, additional and foreign listings); 2.4.2 Business rules for residential Enhanced White Pages (e.g., bold, indent, italics) listings available. 2.5 Publication schedules for the White Pages: CLEC can access via the AT&T CLEC Online website, the directory close dates for areas where CLEC is providing local service. AT&T OKLAHOMA will provide directory schedule updates, including the directory schedule for a new calendar year, not later than thirty

  • Procedures for Providing NP Through Full NXX Code Migration Where a Party has activated an entire NXX for a single Customer, or activated at least eighty percent (80%) of an NXX for a single Customer, with the remaining numbers in that NXX either reserved for future use by that Customer or otherwise unused, if such Customer chooses to receive Telephone Exchange Service from the other Party, the first Party shall cooperate with the second Party to have the entire NXX reassigned in the LERG (and associated industry databases, routing tables, etc.) to an End Office operated by the second Party. Such transfer will be accomplished with appropriate coordination between the Parties and subject to appropriate industry lead times for movements of NXXs from one switch to another. Neither Party shall charge the other in connection with this coordinated transfer.

  • Unbundled Network Terminating Wire (UNTW) 2.8.3.1 UNTW is unshielded twisted copper wiring that is used to extend circuits from an intra-building network cable terminal or from a building entrance terminal to an individual End User’s point of demarcation. It is the final portion of the Loop that in multi-subscriber configurations represents the point at which the network branches out to serve individual subscribers. 2.8.3.2 This element will be provided in MDUs and/or Multi-Tenants Units (MTUs) where either Party owns wiring all the way to the End User’s premises. Neither Party will provide this element in locations where the property owner provides its own wiring to the End User’s premises, where a third party owns the wiring to the End User’s premises.

  • Window Coverings No curtains, draperies, blinds, shutters, shades, awnings, screens or other coverings, window ventilators, hangings, decorations or similar equipment shall be attached to, hung or placed in, or used in or with any window of the Building without the prior written consent of Landlord, and Landlord shall have the right to control all lighting within the Premises that may be visible from the exterior of the Building.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!