FABRICATION CLAUSE Sample Clauses

FABRICATION CLAUSE. 10.1 All piping at the option of the Employer shall be fabricated or bent on the job site or in a shop. 10.2 Where the word "shop" is used in this Article it shall be defined as a qualified pipe fabrication shop under agreement with the United Association or one of its Local Unions. 10.3 The United Association and its affiliated Local Unions reserve the right to refuse to handle, erect or install fabricated piping sent to the job that has not been fabricated in a shop. 10.4 Both the Union and the Employer acknowledge that exceptions may arise where the Employer is required to install component parts of an industrial piping system such as skid mounted vessels, pumps, driers, exchangers, etc, (but excluding pipe and piping formations between such components). Prior to commencement of this work where the Employer is required to install such components and if the matter cannot be mutually resolved between the Employer and the Union, it shall be immediately referred to a permanent review panel consisting of three members appointed by the Union and three members appointed by the Employer. This panel shall establish its own terms of reference which will include provisions for a final and binding settlement on such matters contained herein, including situations where non-competitive bidding has occurred.
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
FABRICATION CLAUSE. The provisions of Article 28, Higher Rate Applicable shall also apply to fabrication of material for installation within the jurisdictional areas of Local Union 537. Not applicable. Local Trade Association Mechanical Contractors’ Association Kingston Sheet Metal Section Local No. 269 Sheet Metal Workers' International Association PROVINCIAL COLLECTIVE AGREEMENT 2013 - 2016 APPENDIX "C" - KINGSTON AREA 2 Apprenticeship Committee - Local 3 3 Apprentices 3 4 Stewards 4 5 Foremen and Sub-Foremen 4 6 Senior Journeymen 4 7 Hiring Procedure 4
Sample 1Sample 2
FABRICATION CLAUSE. The provisions of Article 28, Higher Rate Applicable shall also apply to fabrication of material for installation within the jurisdictional areas of Local Union 537. Not applicable. Sheeter/Xxxxxx Material Probationary Sheeter/Xxxxxx Assistant Handler Employee Hourly Rate 36.14 33.33 29.15 17.10 Vac. Pay 10% 10% 10% 10% H & W * 3.47 3.47 3.47 3.47 Pension 6.22 6.17 6.10 2.61 Prov. Training 0.12 0.12 0.12 0.12 UDPF 0.91 0.81 0.81 0.81 Bereavement Fund 0.05 0.05 0.05 0.05 Stabil. Fund 2.00 1.93 1.66 0.75 Total Package 52.52 49.21 44.28 26.62 Ind. Fund 0.32 0.32 0.32 0.32 Prov. Training 0.12 0.12 0.12 0.12 Total 52.96 49.65 44.72 27.06 May 1, 2014 Sheeter/Xxxxxx Material Probationary Sheeter/Xxxxxx Assistant Handler Employee Hourly Rate 37.14 34.27 30.00 17.60 Vac. Pay 10% 10% 10% 10% H & W * 3.47 3.47 3.47 3.47 Pension 6.42 6.35 6.26 2.71 Prov. Training 0.12 0.12 0.12 0.12 UDPF 0.91 0.81 0.81 0.81 Bereavement Fund 0.05 0.05 0.05 0.05 Stabil. Fund 2.00 1.93 1.66 0.75 Total Package 53.82 50.43 45.37 27.27 Ind. Fund 0.32 0.32 0.32 0.32 Prov. Training 0.12 0.12 0.12 0.12 Total 54.26 50.87 45.81 27.71 Sheeter/Xxxxxx Material Probationary Sheeter/Xxxxxx Assistant Handler Employee Hourly Rate 38.14 35.22 30.85 18.10 Vac. Pay 10% 10% 10% 10% H & W * 3.47 3.47 3.47 3.47 Pension 6.62 6.53 6.42 2.81 Prov. Training 0.12 0.12 0.12 0.12 UDPF 0.91 0.81 0.81 0.81 Bereavement Fund 0.05 0.05 0.05 0.05 Stabil. Fund 2.00 1.93 1.66 0.75 Total Package 55.12 51.65 46.46 27.92 Ind. Fund 0.32 0.32 0.32 0.32 Prov. Training 0.12 0.12 0.12 0.12 Total 55.56 52.09 46.90 28.36 APPENDIX "A" Hamilton/Brantford/Niagara Area (cont'd) Revised 07/01/13 Xxxxxxx Premium: May 1/13 May 1/14 May 1/15 3 - 15 men $3.35 $3.60 $3.85 per hour 16 - 25 men $4.35 $4.60 $4.85 per hour Over 25 men $5.10 $5.35 $5.60 per hour Shift Work Premium: Journeyman: Other classifications: $3.04 per hour at appropriate percentage Irregular Hours Premium: Journeyman: Other classifications: $3.00 per hour at appropriate percentage Travel Allowance: $0.52 per km - May 1, 2013 $0.53 per km - May 1, 2014 $0.54 per km - May 1, 2015 Zone Allowance per day: Zone Kms May 1/13 May 1/14 May 1/15 1 0-32 free zone free zone free zone 2 32-48 $15.35 $15.66 $15.97 3 48-80 $26.13 $26.65 $27.18 $87.40 per day worked - May 1, 2014 $89.90 per day worked - May 1, 2015 all projects within the geographic scope of Local 537 - Hamilton, Niagara an Brantford Areas. Overtime Pay: X2 X1 1/2 Maintenance Work Work Week: 40 hours Show-up Time: 3 hour...
Sample 1

Related to FABRICATION CLAUSE

  • Integration Clause Except for documents and instruments specifically referenced herein, this Agreement constitutes the entire agreement between Bank and Borrower regarding the Loan and all prior communications verbal or written between Borrower and Bank shall be of no further effect or evidentiary value.

  • DURATION CLAUSE 1. This Agreement shall be in full force and effect from May 1st, 2022 to and including April 30th, 2027 and shall continue from year to year thereafter unless written notice of desire to cancel or terminate the Agreement is served by wither party upon the other not less than sixty (60) and not more than ninety (90) days prior to April 30th, 2022 or April 30th of any subsequent year. 2. Where no such cancellation or termination notice is served and the parties desire to continue said Agreement, but also desire to negotiate changes or revisions in this Agreement, either party may serve upon the other a written notice not less than sixty (60) and not more than ninety (90) days prior to April 30th, 2022, or April 30th of any subsequent contract year, advising that such party desires to revise or change terms or conditions of such Agreement. The respective parties shall be permitted all legal or economic recourse to support their requests for revisions if the parties fail to agree thereon. Nothing herein shall preclude the parties from making revisions or changes in this Agreement, by mutual consent, at any time during its term.

  • RECOGNITION CLAUSE The Employer agrees to recognize the Union as the exclusive bargaining agent for all employees in the bargaining units as so certified by the Public Employment Relations Commission (PERC) for the purpose of establishing wages, hours and conditions of employment. If PERC certifies the Union as the exclusive representative during the term of this Agreement for a bargaining unit in general government, the terms of this Agreement apply.

  • State Boilerplate Affirmation Clause I swear or affirm under the penalties of perjury that I have not altered, modified, changed or deleted the State's standard contract clauses (as contained in the 2022 SCM Template) in any way except as follows:

  • CERTIFICATION CLAUSES The CONTRACTOR CERTIFICATION CLAUSES contained in the document CCC 04/2017 are hereby incorporated by reference and made a part of this Agreement by this reference as if attached hereto.

  • TERMINATION CLAUSE Whenever either of the parties hereto determines that termination of this Agreement is in such party’s best interest, then the Agreement may be terminated by giving written notification to the other party. A determination may include, but not be limited to: A. Failure of either party to comply with any or all items contained within Sections 1 through 15 of this Agreement, contract exhibits, and/or provisions of any subsequent contractual amendments executed relative to this Agreement; B. This Agreement may be terminated if project funds to WICHITA under the grant are suspended or terminated; C. Either party hereto may also, by giving thirty (30) days notice, terminate this Agreement for convenience; D. Upon receipt of notice of termination, DERBY shall: (1) discontinue further commitments of contract funds to the extent they relate to the terminated portion of the Agreement; (2) promptly cancel all Agreements and/or orders to subcontractors utilizing funds under this Agreement; (3) submit, within a reasonable period of time to be specified by WICHITA, a cancellation settlement proposal which shall include a final statement for the Agreement, or reimbursement of unearned funds previously distributed.

  • Fabrication Making up data or results and recording or reporting them.

  • Contractor Certification Clauses Contractor represents and warrants that the following statements are true. During the term of the Agreement, Contractor shall not take an action, or omit to perform any act, that results in a representation and warranty becoming untrue. Contractor shall promptly notify the Judicial Council if any representation and warranty becomes untrue. A. No Gratuities. Contractor has not directly or indirectly offered or given any gratuities (in the form of entertainment, gifts, or otherwise) to any Judicial Council personnel with a view toward securing this Agreement or securing favorable treatment with respect to any determinations concerning the performance of this Agreement.

  • ZIPPER CLAUSE 1. This Agreement sets forth the full and entire understanding of the parties regarding the matters herein. This Agreement may be modified, but only in writing, upon the mutual consent of the parties.

  • MANAGEMENT CLAUSE Subject to the provisions of this Agreement, the Employer has the exclusive right and authority to establish policies and manage stores covered by this Agreement and to direct the working forces employed therein including, but not limited to, the rights of hiring, suspending and discharging for proper cause, promoting, transferring and releasing employees from duties because of lack of work. The Employer will notify the Union when it places a cashier on an individual cash control program. There shall be no suspension because of work performance, absenteeism and/or tardi­ ness, without prior written notice having been given to the Union and the employee involved. The trial period for newly engaged employ­ ees shall be the first thirty (30) days of employ­ ment and may be extended to sixty (60) days at the request of the Employer to the Union. When new stores are opened by the Employer, the trial period shall be sixty (60) days for all employees newly employed at such time. After the first sixty (60) days from the opening date of the store, the trial period shall be thirty (30) days.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!